this is badass. i really want to instal a kit on my rds mayor. i just dont know shit about what i need. ill keep watching your video to find out. thanks !!!!
Best thing to do is join our discord. Great place to learn. highvoltagekits.com/discord You can get help with everything about it. You can also then post pictures of frames and ideas you might be having and people can give you tips etc. Cheers
You forgot to mention to have the 4mm Allen key close to hand whilst putting the cover on instead of having to drop everything whilst looking for the allen key! LOL
Great vid. A waterproofing vid would be great. Im in North Wales so high chance of getting wet. Is it ok to fully enclose the controller or would heat be an issue? Cheers
Hi, I had a question, I have cable running on the bottom side of the frame where you show installing the new controller, do you have any suggestions on where I can mount it? Thanks
Was there any option of using internal temperature sensor especially in case of those motors with temperature sensor being placed between the windings from a factory? External one doesn't seem to be serious enough since the motor casing can cool down faster while winding temperature can still rise or stay the same.
It has PAS although on this it has limited use. It's fine for cruising in busy areas safety but not much more due to the gearing. It's more setup for the stealth dirtbike style here. I'll go over the details on that I'm another video for configuring the eggrider display.
Is it possible to be configured for singletrack offroad use, especially technical riding etc? I don't do any street riding. It's all singletrack. @@HighVoltageKits
I wonder if I should do this because my BBSHD has been going fine for what I think was thousands of miles ( couldn't install the speed sensor magnet on this bike ) but lately it developed a problem where the throttle will just go from 0 to 100% rather than a gradual speed increase, and this issue seems to come and go randomly. I have a spare BBSHD because I predicted such a unrepairable fault might occur but its a shame to write off a motor for what seems like an electronic glitch to do with the ESC. I find the idea of a 3000w + mid drive on a mountain bike terrifying but I have also never tried a Sur Ron so I feel like I have missed out on that experience.
You are welcome to join our Discord community and find out more. You can also get a replacement for the stock controller. If you have the right brakes etc it's pretty easy to get used to more power. The kit gives you significantly more pep than a stock sur ron. Good helmet is a must. I ride within my limits for ability and conditions.
I have a ludicrous v2 but am interested in trying this kit of yours. Can I ask, when you attached the phase wires etc why didn't you reuse the rubber grommets and some high temperature sealant instead of leaving them without. I understand there's the gasket. I'm not picking holes, it's just I have previously, and it's a bugger picking it all off super carefully so would rather not if safe/ok. A very informative video.
It's a fair comment. I have some auto grade silicone to use around them. I want to make sure I got the rebuild correct on the motor first and that there are no gremlins. You can seal around them and many do. I want to do a video on waterproofing techniques so I will save it for that. Its a pain in the but to remove it I agree. I damaged the gasket around the phase wire plug which is why it was missing. I am not yet sure if I will use the silicone or if I will use elsewhere around the cover to seal up the controller box. Potentially both.
Is the main purpose of the controller upgrade purely speed/torque? Here in Korea, legally we are limited to 350W (I believe) and 25 kph (15 mph). That said there are about 3 Surrons where I live, but quite a few up in Seoul. Just for the record I have some negative opinions on Surrons. Edit: Already a member on Discord. I just need to install it on my desktop.
Well speed and torque are huge things. You also get a much nicer throttle response. But in many ways you are creating a stealth dirt bike or a hot rod street machine. With the Eggrider you can set things up to be street legal though and then turn that off when you get off road or somewhere these kind of vehicles are permitted to use more power. Having spent a bit of time in South Korea taking taxis I found the attitude to road safety pretty lax so not sure if they actually target ebikers there. The Sur Rons have a bad name mainly for dis respectful and dangerous riding. One of these kits though on a bike will out perform a stock Sur Ron for speed and acceleration. In general the authorities are more on the lookout for things that look like a dirt bike. Where are you in Korea? I had the fortune to visit the South for the Spring Blossom festival time. Mainly around Busan and Changwon. Cheers
Absolutely. Each one is made to order. Please email greg@highvoltagekits.com there are a few questions to get the kit configured to your setup. Let me know if you have any questions.
this is badass. i really want to instal a kit on my rds mayor. i just dont know shit about what i need. ill keep watching your video to find out. thanks !!!!
Best thing to do is join our discord. Great place to learn. highvoltagekits.com/discord You can get help with everything about it. You can also then post pictures of frames and ideas you might be having and people can give you tips etc. Cheers
The new harness is looking super clean! Super jealous, I guess I gotta build another HV bike...
Cheers Dave. That's a really good excuse! 😆
Hey! That's not an excuse, that's a reason! 🤣@@HighVoltageKits
You forgot to mention to have the 4mm Allen key close to hand whilst putting the cover on instead of having to drop everything whilst looking for the allen key! LOL
Very true mate. Been there done it.
cant wait to order mine
Sounds good mate
I wish someone that has kit on their bike would make a video showing performance difference. The day i can finally get my kit ill be making a vid
There are loads of videos in the channel history including of our demo bike. That said will very much look forward to seeing your build :)
@@HighVoltageKits i know u guys have tons of vids, thats why i want it, lol but i mean videos of clients that have bought kits
Egg Rider and HV App settings Video would be Great. I just messaged you on Discord about getting the HV App. Thanks.
On it. Cheers
Agree 💯👍
Great vid. A waterproofing vid would be great. Im in North Wales so high chance of getting wet. Is it ok to fully enclose the controller or would heat be an issue? Cheers
It will throttle if it gets too hot. For most uses it should be ok. If it's very hot outside it might reduce power. I'll work on the video..Cheers
Hi, I had a question, I have cable running on the bottom side of the frame where you show installing the new controller, do you have any suggestions on where I can mount it? Thanks
Was there any option of using internal temperature sensor especially in case of those motors with temperature sensor being placed between the windings from a factory? External one doesn't seem to be serious enough since the motor casing can cool down faster while winding temperature can still rise or stay the same.
Great, detailed video. Does it have PAS or just strictly throttle on this bike?
It has PAS although on this it has limited use. It's fine for cruising in busy areas safety but not much more due to the gearing. It's more setup for the stealth dirtbike style here. I'll go over the details on that I'm another video for configuring the eggrider display.
Is it possible to be configured for singletrack offroad use, especially technical riding etc? I don't do any street riding. It's all singletrack. @@HighVoltageKits
Yeah I think so. I'll have more details for you when I go over the eggrider settings
I wonder if I should do this because my BBSHD has been going fine for what I think was thousands of miles ( couldn't install the speed sensor magnet on this bike ) but lately it developed a problem where the throttle will just go from 0 to 100% rather than a gradual speed increase, and this issue seems to come and go randomly. I have a spare BBSHD because I predicted such a unrepairable fault might occur but its a shame to write off a motor for what seems like an electronic glitch to do with the ESC. I find the idea of a 3000w + mid drive on a mountain bike terrifying but I have also never tried a Sur Ron so I feel like I have missed out on that experience.
You are welcome to join our Discord community and find out more. You can also get a replacement for the stock controller. If you have the right brakes etc it's pretty easy to get used to more power. The kit gives you significantly more pep than a stock sur ron. Good helmet is a must. I ride within my limits for ability and conditions.
I have a ludicrous v2 but am interested in trying this kit of yours. Can I ask, when you attached the phase wires etc why didn't you reuse the rubber grommets and some high temperature sealant instead of leaving them without. I understand there's the gasket. I'm not picking holes, it's just I have previously, and it's a bugger picking it all off super carefully so would rather not if safe/ok. A very informative video.
It's a fair comment. I have some auto grade silicone to use around them. I want to make sure I got the rebuild correct on the motor first and that there are no gremlins. You can seal around them and many do. I want to do a video on waterproofing techniques so I will save it for that. Its a pain in the but to remove it I agree. I damaged the gasket around the phase wire plug which is why it was missing. I am not yet sure if I will use the silicone or if I will use elsewhere around the cover to seal up the controller box. Potentially both.
@@HighVoltageKits nice, it looks a very clean kit you've made.
Is the main purpose of the controller upgrade purely speed/torque? Here in Korea, legally we are limited to 350W (I believe) and 25 kph (15 mph). That said there are about 3 Surrons where I live, but quite a few up in Seoul.
Just for the record I have some negative opinions on Surrons.
Edit: Already a member on Discord. I just need to install it on my desktop.
Well speed and torque are huge things. You also get a much nicer throttle response. But in many ways you are creating a stealth dirt bike or a hot rod street machine. With the Eggrider you can set things up to be street legal though and then turn that off when you get off road or somewhere these kind of vehicles are permitted to use more power. Having spent a bit of time in South Korea taking taxis I found the attitude to road safety pretty lax so not sure if they actually target ebikers there. The Sur Rons have a bad name mainly for dis respectful and dangerous riding. One of these kits though on a bike will out perform a stock Sur Ron for speed and acceleration. In general the authorities are more on the lookout for things that look like a dirt bike. Where are you in Korea? I had the fortune to visit the South for the Spring Blossom festival time. Mainly around Busan and Changwon. Cheers
Really nice videos. Is it possible to get this kit in EU?
Yeah we ship there. Shoot an email to Greg@highvoltagekits.com he will get you started
can we get this kit in the uk?
Absolutely. Each one is made to order. Please email greg@highvoltagekits.com there are a few questions to get the kit configured to your setup. Let me know if you have any questions.
How do get kit u made
Sorry I missed this. Easiest way is to email greg@highvoltagekits.com or to join our discord