2022+ Frontier Cold Air Intake by Z1 Off-Road Dyno Testing

The Z1 Off-Road Nissan Frontier Advanced Induction System (AIS01) is engineered to outperform the competition, providing class-leading improvements in horsepower and torque.
SHOP NOW: www.z1offroad....
This truck saw a maximum gain of 10whp and 8tq spread across the entire powerband after installing the Z1 Intake. You can see the increase in torque spread throughout the curve with modest improvements in peak torque at higher RPM. These tests were done back-to-back under the same conditions for the most consistent results.

[@JasonSouthSoundSound]

Yeah, new toy for my Frontier. Thanks for the video, looks easy to install.

[@nefty1972]

Now we need a Snorkel Kit for the 3rd gen frontier😢 please make one for us

[@rogerpritchard3366]

What they don’t show you is what a pain in the a.. it is to install the hard plastic piece inside the fender. The instructions say remove inside fender skirt with no further instructions. I would not recommend this kit just for this reason. When you install as required it doesn’t fit together well. There are definitely better more thoughtful intakes out there. ⭐️⭐️

[@archersanchez3926]

same thing happens to me, is there any way to get a better fit from the box and grommet to the fender, i just drove it today and it came undone.

[@garretyetzke639]

You can just connect the plastic piece to the rubber part and feed it through the hole then pull it back towards you. Takes a bit of effort but gets through a lot faster than removing the fender skirt

[@JiuJelqSuMaster]

Consider using a shorter camera man for future install videos

[@hailstorm1986]

Thanks for not warning us about the screws stripping on the maf sensor. An absolute PITA!!!!!!!! 😑

[@rogerpritchard3366]

Yes also the location could have been moved a inch or so to get a straight line to maf Allen head screws. ☹️

[@monocogenit1]

thanks for the video.

[@ericbowers71]

As the manufacturer of a product, how do you not show the full installation?

[@WalkingUpsideDown]

Nice video, 40$ for the stop start bracket is wild tho

[@Thisthat1234]

MPG improvment?

[@reviewsbyHP]

I thought the 3.8 engine is supposed to get 310 HP?

[@z1off-road]

Nissan references the 310 spec at the crankshaft and we measure actual at the tire.

[@reviewsbyHP]

@@z1off-road thank you. Didn’t know that

[@JJsGA]

All manufacturers rate to the crank as a net power rating....back in the day they did a gross power rating which is the engine minus all the accessories.

[@sdfiske64]

When are you going to install the Nismo exhaust system??

[@z1off-road]

we will be releasing our shootout video in the upcoming weeks

[@kaoticmind09]

Ideas for what to do with the extra fuse boxes on some models?

[@z1off-road]

We’re working on a solution to relocate the box for the Auto Start Stop that was added.

[@sdfiske64]

What fuel are you using??
89
Or 90

[@z1off-road]

89