Remove And Install BMX Grips, The Simple Way!
HTML-код
- Опубликовано: 6 сен 2024
- In this video I’ll show you a simple way to remove and install your hand grips without damaging anything.
What you need before you start?
- New Grips (Race Face Chester Grips Slide-on)
- Zip tie (7” long)
- Glass cleaner
First, lay down your bike on its side, hand grip faces down.
Take the zip tie and stick it inside the grip and get to the bottom as much as you can, then spray glass cleaner in between grip and handlebar.
Slide off the old grip.
Prepare your new grip, spray glass cleaner on the handlebar and inside the new grip.
Slide on the new grip and adjust the brake.
Now do the same thing again on the other side.
Track: Electric Joy Ride - Origin [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Electric Joy Ride - Or...
Free Download / Stream: ncs.io/origin
#bmxgrips #bicyclegrips #raceface
Danyo Sports Channel Episode 52
RUclips: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports
I was trying to remove my grips with no luck at all. Thought about cutting them off. I found this video and tried your method. It work so easy. I used a very thin screw driver instead of a zip tie. The zip tie would get stuck. Anyway the grips came off to go on a new handle bar I just installed. Thanks so much for this very helpful video......Take care, Bluefin.
Same
I cut them off before watching this 😞
Thank you sir for such a helpful video. I have never replaced grips on a bike before. It looked intimidating before seeing your video. I just replaced the original grips on my 22 year old bmx bike and I was done in less than 10 minutes!
I tried to remove a grip for over 50 minutes swearing every second, I ended up spraying half a bottle of WD-40 and ripped it out with my teeth (I know it’s dangerous but I was going to give up on life)
You're a genius man. My grips were too tight to use zip ties so I used a pair or pliers to hold it open while my wife sprayed it and worked!
Thank you very much for this video. Very efficient and it worked great. The cable ties and glass cleaner are things I always have at home.
Amazingly easy!! Thank you!!
this worked like a charm. quick and easy. will pass along to others🤘
If you use rubbing alcohol it’ll evaporate and dry way faster 🤙🏼
It will also damage paint protecting the metal, bad idea
Awesome man, I have never seen the zip tye method. Helped me out tremendously. Thank you.
I migjt habe to try this cause i have a grip that slid and now i cant get it to move back its boy sliding any more which slightly worries me
I think isopropyl alcohol would be a better thing so it doesn't corrode your metal (it evaporates very quickly). Other than that. Amazing video/
Really good method help me a lot thank you so much
Do we need pumping techno music in every video?
It worked! I didn't use Windex, I just used water with vinegar in it
And it worked
I just use a water with detergent soap or any kind of soap. It works as well. After putting back the grips again, just let it dry itself
Nice, thanks for sharing! 😃
How long does it take to dry?
@@fury8995 for me it took like 2-3
Sounds like rust to me
@@Gluvvbrii nah
This was a tremendous help. 🙏🏿 😊
This actually works thanks brother 👍
my grips were so old they were literally glued to my handlebars. I had to take a knife and scrap the rubber off lol
I left them out to dry over night and half a day but they still haven’t dryed. Am I doing something wrong?
Try to blow them with hairdryer, this would speed up the drying process.
What happens if I don’t have a hair dryer
Put them outside under the sun, they will dry out eventually.
Absolutely brilliant! Thank you!
Excellent work
Very informative, thank you.
Wow. I can’t wait to try it.
Thanks bro that worked awesome!💪
Браво!Благодаря!
Thank u so much this work so well
Does the glass cleaner ever dry out because my grips are slipping after about an hour of letting them sit and I only used a little cleaner
Yes, the glass cleaner should dry out pretty fast, try remove the grips and clean the handlebar, make sure you remove any access oil and dirt then reapply it.
Old grip, but it off. Clean bar with iso. Then use iso to put grip on.
Sweet
Thank you so much
I had forgotten about felt BMX bikes. They sponsored Scotty.
worked! 👍
I use alcohol instead of glass cleaner
does this work with nothing just on and off
@@tannerpoltl1756 To take them off you can use a sringe to inject the alcohol in between the handlebar and the grips.
El Furioso hey it worked man thx
@@tannerpoltl1756 👍
Does glass cleaner have an affect on the finish?
good video
How long it take to drye ?
It took me an hour.
can i use WD 40 instead
No, don’t use WD-40.
How long do I let them dry
They’ll dry overnight, if not then blow them with hair dryer to speed up the process.
I have this thing that doesn’t let me take off the grips so I don’t know how to take that part off😔
If a zip tie didn’t work, try to use a chopstick and squeeze that in with the glass cleaner, twist it and pull it out.
DanyoSports thx that was help full I just subbed to show my appreciation😄
so all you really need is windex?
Yes and some zip ties.
I use beer
That’s cool
🤗💯🤗
Test
Omggggg