Mugen SS Wing Install - Honda S2000 Build Series
HTML-код
- Опубликовано: 3 май 2020
- Subscribe for future install videos and to follow the progress of my s2k! Thanks! / @zaahidrahman
This install video officially kicks off the build series for my Honda S2000. Final product came out great and I freakin' love the new wing!
#mugen #honda #s2000 
Авто/Мото
I really appreciate your content. The detail and quality of your videos makes it not just interesting but also lends reassurance when I’m looking at buying some of the parts in the video. This video in particular convinced me pull the trigger on the Mugen wing while one of your others made me aware that I should also buy the oem trunk reinforcements. Thank you again for taking the time to produce this content!
hahaha thanks bro! the fact that you left this comment on my first video ever makes me so happy. good luck with your build
Foind one of your newer videos last night and ive now jumped down the rabbithole and watvhing every s2000 video haha.
I also have a silverstone s2000. Although mine is an AP1
Hahahah thank you! You get a real look at the progression of video quality 😂. Hopefully some of them were helpful
Good content!
More vids on the S2000 PLEASE haha
Haha dude, your comment inspired me to not be lazy this weekend. Ive been sitting on some new parts for awhile now that are ready to filmed/reviewed and installed. More Mugen parts coming soon!
nice!
こんにちは🌞
無限パーツ最高にパフォーマンス発揮してくれますよね！頑張って👍
見てくれてありがとう！ 😄
What’s up bro… Didn’t know u had a RUclips channel
Hahah whats up, man. Yup, this was my first install video. Im guessing you guys are putting on the mugen wing now??
That looks great man. Thinking of getting this or the cr spoiler. Read online though that the standard boot lid might need reinforcing due to warping from the down force. Have you had any such issues?
Fozzy personally, i dont think its necessary. No warping after a few months of installing it. I dont think it provides enough downforce to need reinforcement.
@@zaahidrahman thanks mate. That's definetly reassuring. I love how sleek the mugen looks but they're hella expensive! Trying to source a fibreglass version of the mugen or the cr wing. Thanks again for the informative video.
Hey when you said you figured out how to get that side to not lift - what exactly did you do to press it down? I installed mine brand new yesterday and the right side is also not adhering very well. I cleaned the trunk lid out in direct sunlight with isopropyl alcohol a few times to try to make sure there wouldn't be any wax. The left side adhered just fine but the right side looks like it's lifting through about the middle half of where the bracket sits.
I put some shop towels over the area and weighted it down with a dumbbell over night. Lol i know.. not the most sophisticated but it eventually adhered and hasnt changed since.
@@zaahidrahman thanks man - I took your advice and mine is all good to go too!
@@kalmtraveler niiiice! Good to hear it worked!
Hey man I just ordered one. How's yours still holding up & do you have any pro's & cons about it now since it's been a while?
congrats on pulling the trigger. You'll love it. still no issues and looks great. i recently installed a OEM CR front lip and will be making a video on it soon. I'll go over my thoughts on the wing as well. it still looks great and works well. no warping. before you lay down the 3m and bolt it up, make sure you clean the area with something that doesnt have wax in it. you want to give the 3m the best chance to adhere to the trunk.
@@zaahidrahman I'll be getting my body man to install it so I'm sure they will use the right products.
@@zaahidrahman I'm looking forward to the content.
Hey man, what size bolts is the hardware. I bought one used but the guy had accidentally thrown out the bolts. Also what size did you use to drill the holes, thanks!!!
whats up, man. thanks for watching! this video was filmed so long ago i totally forgot what sized hardware i used. i recommended taking the wing stand to the hardware store and testing out what bolts fit. I think it was an m10 - 1 inch bolt but you should double check. once you find the right size bolt, take some bits and work the hole up to the width of the bolt. i believe I drilled a pilot hole with a much smaller bit and then worked my way up until the bolt could pass through. i also used touch paint fill in the inside of the hole to avoid leaving any exposed metal. good luck and congrats on the wing purchase
@@zaahidrahman thanks man, I appreciate the reply!
Do u have reinforce the trunk so it doesn't warp or bend at high speeds? I'm debating on getting am aftermarket CR wing but people are saying to reinforce the trunk.
Yooo thanks for watching! I did not reinforce my trunk for my mugen wing. The cr wing is a lot bigger so reinforcement might be a good idea. I have not noticed any warping with my set up
@@zaahidrahman I appreciate it bro 🙏 Its an AP1 but I'm basically just replicating the CR 😆 Got the OEM bumpers, CR wheels and hardtop, ap2 headlights/tail lights from like 8 years ago. All been collecting dust in the back shed. Just pick up a rep lip and spoiler. Then Supercharging it in the summer. Keep up the good work and vids!
@@rockyk1395 i love seeing cr conversions! Good luck with your build and thank you!
I’m thinking of buying this one is there any link u cán send?
King Motorsports
What are the dimensions of the wing?
Thx!
Hi Chris, the wing is about 53 inches wide and 4 high measured from the trunk to the to the center of the wing. definitely not the biggest / most functional wing but it looks good lol.
@@zaahidrahman
Thx bud. It's going on a 2018 infiniti q50 red sport so I needed to know the dimensions. My next question is, how far apart are the mounting brackets from each other and how many inches from the rear edge of the wing to the front edge of the wing?
Thx!!
Also, what's the link to purchase?