Nice! I ended up getting the radiator guard after a rock went through my husbands radiator on the highway on his bike one time. Luckily I haven’t had anything like that happen or anything happen to our fairings. Glad you were ok!
Hey, great video and awesome bike, just a question, did you run the 120/70 on the front tire or the 120/60? i don't see a 110 in the road 5, only the road 6
Hey thank you! I just looked on Revzilla and it looks like they must not offer that size in the road 5's anymore. Probably because they have the road 6's now. I just looked at the road 6's and they have the 110/70's listed there. So that would be what you are looking for 🙂 Here is the link for you. www.revzilla.com/motorcycle/michelin-road-6-tires?sku_id=10144070
Thank you so much. They definitely do the job! These are the Shogun no cut frame sliders and I got them off of Revzilla www.revzilla.com/motorcycle/shogun-frame-sliders-kawasaki-ninja-300-2013-2015
@@robson3r193 unfortunately I gave the windscreen away to someone that I thought could use it but if you have IG I can show a cutout comparison. Would that work for you?
@@CheyGrace_ congratulations! You will love this bike. I didn’t have to mess with the suspension or anything either. I just did the lowering link and the handlebars were raised. Ride safe ✌🏼
@doublet7429 Thank you so much for sharing. I don’t think I went to the lowest the link could go. I think it was lowered an inch or two. I honestly could probably raise it one if I wanted to now that I am way more familiar with my bike.
Yes it’s removable and even when with the seat cowl on you still have storage. You can swap it out for the original seat that comes stock on it too if you need to put on a tail bag. Thanks for watching! I appreciate the support and I’m glad you enjoyed the video. Ride safe!
When you get the led tail light it also flashes left and right for your blinkers you just need a flasher relay.... that way you can remove that ugly stock plate mount and blinkers. I think you'll like it better.... just something to think about 🤷
Hey thanks for the suggestion. I did look at the fender eliminator kit when I first bought this bike but opted not to get it. I thought it made the back of this particular bike look too pointy and small. But thanks for the recommendation 🙂
I bought it in 2017 from Revzilla. I can’t remember how much it was back then but it’s anywhere from $235 - $260 now depending on if you get the matte carbon fiber or not. I’m putting the link for you below www.revzilla.com/motorcycle/leo-vince-gp-corsa-slip-on-exhaust-kawasaki-ninja-300-2013-2015
Yea I know a lot of people complain about the Kawasaki seats not being comfortable. I did look into getting a Corbin seat at one time after seeing the one my husband installed on his zx6r but honestly I don’t mind it enough to drop that much money. At least not yet anyway 🤣
Sure the link is below! If you would like a short quick video of how it looks on my bike and how I attached it to my bike specifically just let me know. www.revzilla.com/motorcycle/ram-mounts-universal-cell-phone-holder-kit-un7
@@littledevil23 Ah okay, I actually found that Kawasaki made some I and just ordered those to throw on mine. I also just updated my turn signals to LEDS, and did an integrated taillight so it is all ready for spring.
@@ClydapusGotwald Nice! I know the led’s will look great and be so much brighter. The Kawasaki brand of sliders were out of stock and had no eta of when they would be in stock again back when I was shopping. Glad you were able to get them, they are nice!
They come together. I’ll post the link below for you. They came off Revzilla www.revzilla.com/motorcycle/roaring-toyz-lowering-blocks-handlebar-risers-kawasaki-ninja-250-ninja-300-2008-2017
Frame sliders! Crap! I forgot those. I got my son a 2013. converted all the lights to LED integrated tail, fender delete, leavers, gear indicator, and tank grips.
@@littledevil23 I will, I had to buff out the right side. He is a true beginner. Dropped it 2 times already. Fortunately it was just forgetting the clutch when he stopped. That is why I got the gear indicator.
@@gopherchucksgamingnstuff2263 happens to the best of us 🤣 I’m no expert by any means. I have seen even skilled riders make rookie mistakes lol. I just blame it on having too much fun while on the bike. Hope your son rides safe ♥️
@@littledevil23 That's the real truth. 3 months ago my 30-year experienced ass dumped my GSXR on my leg in the garage. slipped on some dunst. Keep learning, if you stop there is no point in continuing.
Be safe out there man, just lost a good friend on thursday due to a car pulling out in front of his 2014 Ninja 300. Always ride defensively
I am so sorry about your friend! That is terrible and so sad. You are so right, gotta ride defensively for sure.
Love it. Awesome. I couldn't figure out where to put the frame sliders on
Nice! I might pick the same bike up tonight! 😃
@@MeTubing oh how exciting!!!!! Good luck 🥰 Let us know if you do!
I also got a 2017 Ninja 300 at the same time this video posted, sickkk
That’s so cool!! Congratulations!! Ride safe out there
🔥Damn that bike is sick af💯💯
I hit some debris on the highway busting my fairings open, so I turned my ninja 300 into a naked ninja 300. Best Mod ever 🔥
Nice! I ended up getting the radiator guard after a rock went through my husbands radiator on the highway on his bike one time. Luckily I haven’t had anything like that happen or anything happen to our fairings. Glad you were ok!
Thanks for the video :)
Hey, great video and awesome bike, just a question, did you run the 120/70 on the front tire or the 120/60? i don't see a 110 in the road 5, only the road 6
Hey thank you! I just looked on Revzilla and it looks like they must not offer that size in the road 5's anymore. Probably because they have the road 6's now. I just looked at the road 6's and they have the 110/70's listed there. So that would be what you are looking for 🙂 Here is the link for you.
www.revzilla.com/motorcycle/michelin-road-6-tires?sku_id=10144070
Ok awesome! I’m leaning towards a set of 120/60r17 and 160/60r17’s thanks! Ride safe!
@@12VHotrodder Sounds like two good options for sure! Ride safe and thank you so much for watching 🙂
where did you get the frame sliders? I like those
Thank you so much. They definitely do the job! These are the Shogun no cut frame sliders and I got them off of Revzilla
www.revzilla.com/motorcycle/shogun-frame-sliders-kawasaki-ninja-300-2013-2015
Could you show the size of the original windshield next to the sports windshield?
@@robson3r193 unfortunately I gave the windscreen away to someone that I thought could use it but if you have IG I can show a cutout comparison. Would that work for you?
Ok 👍
@@robson3r193 awesome. DM me on IG at LittleDevilFarm1223 and I’ll send it there since I can’t message through YT. Thank you 🙂
I shared this with my daughter, who is also 5' high. We just got her a 2015 Ninja 300. Great suggestions! How low were you able to go?
@@CheyGrace_ congratulations! You will love this bike. I didn’t have to mess with the suspension or anything either. I just did the lowering link and the handlebars were raised. Ride safe ✌🏼
@doublet7429 Thank you so much for sharing. I don’t think I went to the lowest the link could go. I think it was lowered an inch or two. I honestly could probably raise it one if I wanted to now that I am way more familiar with my bike.
Why did you not just get her a 400?
Nice looking bike, I love it, I'm wondering if you could provide us with the link for the tail light. It looks very nice.
Thank you! I’m also going to update the description
www.motodynamic.com/2013-2017-kawasaki-ninja-300-sequential-led-tail-lights-smoke.html
Where did you get the pro grips?
I got these specific ones on Revzilla
Hello, is the seat cowl removable?? Like if u want to use the storage under it?
Thank you! great video by the way.
Yes it’s removable and even when with the seat cowl on you still have storage. You can swap it out for the original seat that comes stock on it too if you need to put on a tail bag. Thanks for watching! I appreciate the support and I’m glad you enjoyed the video. Ride safe!
When you get the led tail light it also flashes left and right for your blinkers you just need a flasher relay.... that way you can remove that ugly stock plate mount and blinkers. I think you'll like it better.... just something to think about 🤷
Hey thanks for the suggestion. I did look at the fender eliminator kit when I first bought this bike but opted not to get it. I thought it made the back of this particular bike look too pointy and small. But thanks for the recommendation 🙂
Where did you buy your exhaust and how much did it cost?
I bought it in 2017 from Revzilla. I can’t remember how much it was back then but it’s anywhere from $235 - $260 now depending on if you get the matte carbon fiber or not. I’m putting the link for you below
www.revzilla.com/motorcycle/leo-vince-gp-corsa-slip-on-exhaust-kawasaki-ninja-300-2013-2015
@@littledevil23 thank you for the link and btw is this exhaust slip on exhaust?
@@Jimjake67 it is a slip on
nice. i got a ninja 300 too. you should get a more comfortable seat. Find the stock one is just too hard.
Yea I know a lot of people complain about the Kawasaki seats not being comfortable. I did look into getting a Corbin seat at one time after seeing the one my husband installed on his zx6r but honestly I don’t mind it enough to drop that much money. At least not yet anyway 🤣
Hi could you send the exact link for the phone mount. The link that you provided shows many different ram mounts. Thank you!
Sure the link is below! If you would like a short quick video of how it looks on my bike and how I attached it to my bike specifically just let me know.
www.revzilla.com/motorcycle/ram-mounts-universal-cell-phone-holder-kit-un7
@@littledevil23 thanks a lot! Also, could you link your swingarm spools.
Sure thing!
www.revzilla.com/motorcycle/woodcraft-swingarm-spool-sliders
@@littledevil23 thank you!
Hii thanks for the video! but please remove those back tail light gosh i really hate how it looks, it looks better without it! 😭
Hey thanks for the comment! Fender eliminators are definitely a personal preference. I think it depends on the bike personally.
I have the same bike, do you happen to know the name of those frame sliders? I’m looking to buy and install some on mine.
They are the Shogun no cut frame sliders 🙂
@@littledevil23 Ah okay, I actually found that Kawasaki made some I and just ordered those to throw on mine. I also just updated my turn signals to LEDS, and did an integrated taillight so it is all ready for spring.
@@ClydapusGotwald Nice! I know the led’s will look great and be so much brighter. The Kawasaki brand of sliders were out of stock and had no eta of when they would be in stock again back when I was shopping. Glad you were able to get them, they are nice!
Nice color
Thank you ☺️ It’s even better in person
Thankz was helpful xxxx
Glad you enjoyed it!
i have the same bike!
@@sriavula that’s awesome you have good taste 😆! It’s cool when you meet someone with the same bike!
@@littledevil23 frr
You forgot that raiser for handlebars.
They come together. I’ll post the link below for you. They came off Revzilla
www.revzilla.com/motorcycle/roaring-toyz-lowering-blocks-handlebar-risers-kawasaki-ninja-250-ninja-300-2008-2017
Frame sliders! Crap! I forgot those. I got my son a 2013. converted all the lights to LED integrated tail, fender delete, leavers, gear indicator, and tank grips.
Those are great mods! You can still add frame sliders if you ever decide to. 🙂
@@littledevil23 I will, I had to buff out the right side. He is a true beginner. Dropped it 2 times already. Fortunately it was just forgetting the clutch when he stopped. That is why I got the gear indicator.
@@gopherchucksgamingnstuff2263 happens to the best of us 🤣 I’m no expert by any means. I have seen even skilled riders make rookie mistakes lol. I just blame it on having too much fun while on the bike. Hope your son rides safe ♥️
@@littledevil23 That's the real truth. 3 months ago my 30-year experienced ass dumped my GSXR on my leg in the garage. slipped on some dunst. Keep learning, if you stop there is no point in continuing.
@@gopherchucksgamingnstuff2263 you’re so right!
The reason i get mocked for stunt riding a 300 😂
What reason?