FEELING Suspension Damper With Our Coilover Display

You guys love Josiah's tip videos so much, we had to come out "stronger". lol. Anyways, this week we discuss Dampening. The engineering department made this very custom arm wrestling display that utilizes a corvette ‪@BCRacingNorthAmerica‬ coilover.
@josiahfallaise
‪@BCRacingNorthAmerica‬
@fdfraceshop
Timeline:
Why another display? (00:00)
What is a coilover? (00:53)
What is dampening? (01:15)
Key terms to know (01:30)
Bump and Rebound (01:41)
Motion Ratio (01:50)
Unsprung Mass (02:16)
1,2,3,4 Way (02:36)
Anti Geometries (02:50)
Ride Height (03:11)
Spring Rates (03:25)
Preload Adjustment (03:35)
Alignment Settings (03:47)
Helper Springs (04:01)
Aero Dynamics (04:10)
Regular Checks (04:33)
Testing and Tuning (04:42)
Feedback Collection (04:58)
Bumpstops (05:08)
Where to Start? (05:50)
Adjusting Dampening Settings (08:50)
How to know if changes are needed? (11:22)
Playing with Settings (12:42)
Closing (14:00)

[@Deathreaper782]

A good way to practically convey the dynamic nature of damping. Thanks for the ziptie tip too.

[@cobratuner]

Now sell the unit to FEAL Suspension so Odi can bring it around for events too lol.

[@tomkhodorkovsky1477]

Great video, Josiah!
Minor nit-pick, it's actually "Damping", not "Dampening". To "damp" something means to slow down its motion, such as with a fluid. To "dampen" something means to make it wet 😂

[@Not_so_breit]

My mans got the best tip around. Excited to have Josiah’s tip back in our lives

[@TandemStyle]

I need this in my shop and to take to our drift events.

[@toastskate]

Amazing

[@mariosnikolaou5212]

First comment all the way from Greece. Love your videos guys keep it up!!

[@El0te_S550]

Can we get vids of you explaining and going through all your s550 mustang products!! I’d love to learn the ins and outs of the suspension I run on my car!

[@DriftDany]

So , helper springs out and set preload ? Or install helpers ?

[@313Chan]

Will this be at gridlife?

[@SaleenDrift]

So if your zip tie is glued to the top, tighten the compression some and loosen the rebound so the shock can extend to its natural position?

[@valborysov]

Blud built a manual shock dyno for $50🤯

[@meegel]

not to be that guy, but is it damping or dampening

[@FDFraceshop]

Definitely damping haha

[@meegel]

@@FDFraceshop word lol

[@derekkuehn]

Came here to say the same thing!

[@mkrumm3]

Beautiful display! Awesome content, but in an effort to truly teach people you should be using the correct terminology! With great power comes great responsibility.

[@Fox22Starr]

that was incredibly useless