Perhaps have one with the squeeze and then another timed round bucking and stacking bales by hand. Admittedly not a job I miss though straw was worse the bales may have been lighter but the slithers in your hands and arms were as itchy heck
Awesome I loved the hay loading race. Back in the day me and my dad would race unloading trucks with big round bales. He'd run the Case MX120 with a grapple and grab 2 bales at a time and I'd be running the old Case 530 backhoe with a spear grabbing singles. (Crank it in reverse, jam into forward with the shuttle, nail one rear brake, and wheelie that bugger around on the rear axle) the never beat me, but I never beat him. Him unloading 2 and me unloading singles. Great memory I have with my dad. If you make the work fun you will never work a day in your life he always told me. Wise words!
@@BalesHayFarmandRanch Interwebs doesn't transpose sarcasm very well haha. Mr Huppert also helped design and develop the rotary hay head up here and we've been known world wide for the best Timothy Hay since the 60's :-)
I tried to run a squeeze once to take 5 stacks of small bales out of a friend's barn. The bales were a little soft and I think I squeezed the stack a little too much and the stack almost fell over. At that point I decided to use my retriever to pull the rest of the stacks out because I was not looking forward to restacking 88 small bales. My hats off to all the squeeze drivers out there.
Too many interesting things to comment on.A great video BTW i just realized Little Blue is throwing al the power through a single axle!You'd be able to spin the wheels at the speed limit surely?😁
That's quite the con, tell 2 guys its a race while they do all the work and you walk around talking to other guys meanwhile you get your trucks loaded all in the name of "Fun". Stampede looks like the lowrider version of trucks- but classier. It is PDI after all.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
This race was set up. I demand a rematch in 2023.
2023 with small bales.
Get another squeeze get the Welkers there and see who is the best lol
@@a.j.leonard964 that might work.
It was a good race! ✌️🖖
Perhaps have one with the squeeze and then another timed round bucking and stacking bales by hand. Admittedly not a job I miss though straw was worse the bales may have been lighter but the slithers in your hands and arms were as itchy heck
I found your channel through Millennial Farmer. The farmer RUclips community is awesome. Love all of your videos!
Thanks for the follow!
Awesome I loved the hay loading race. Back in the day me and my dad would race unloading trucks with big round bales. He'd run the Case MX120 with a grapple and grab 2 bales at a time and I'd be running the old Case 530 backhoe with a spear grabbing singles. (Crank it in reverse, jam into forward with the shuttle, nail one rear brake, and wheelie that bugger around on the rear axle) the never beat me, but I never beat him. Him unloading 2 and me unloading singles. Great memory I have with my dad. If you make the work fun you will never work a day in your life he always told me. Wise words!
It’s funny, I like to complain about work, but I miss it when I’m away from it!
Hello from Moosomin ,Saskatchewan, Canada Great videos thanks for sharing.
Hi!! Hello!! Hola!! 👋🏻
I gotta tellya I love the chicken lights and chrome!!
Thanks for sharing all the fun you had with Randy and Zach.
It’s always a blast with those guys!
Wow, this is the best graphics I've ever seen on Farming Simulator! Stay Pony Golden boy! 🐎🇺🇸🦅
Lol Dano!!!
Glad you have a "pickup" rather than a "truck"!
Great job guys
Trevor arm chair farmer here. Colored tie raps work good to identify hoses especially quick disconnects Thanks
Clerf squeeze made right here in the Kittitas Valley!
You made that name up.
@@BalesHayFarmandRanch ?
@@MountainCuban I’m just kidding.
@@BalesHayFarmandRanch Interwebs doesn't transpose sarcasm very well haha. Mr Huppert also helped design and develop the rotary hay head up here and we've been known world wide for the best Timothy Hay since the 60's :-)
@@MountainCuban you are absolutely correct. And I like to joke a lot. And that doesn’t always come across in text.
Very interesting thanks men.
I love how the welder just leaves the wire sticking out
hey does rodeo Reed come down there and haul your hay
He has picked up hay from us in the past!!
Like your videos , always interesting and teach us alot
Thank you. I do my best.
Can the squeeze pick up a whole stack?
About 10,000 lbs.
What an awesome video I like all your videos I think they’re pretty cool Eugene from Ontario Canada
Thank you. But let’s be honest. Some are boring. But every day isn’t awesome.
You should start a hay equipment field day. Squeezes, bale wagons, hand-stacking, etc. I’d come watch!
I’ve already floated the idea past the other guys.
I tried to run a squeeze once to take 5 stacks of small bales out of a friend's barn. The bales were a little soft and I think I squeezed the stack a little too much and the stack almost fell over. At that point I decided to use my retriever to pull the rest of the stacks out because I was not looking forward to restacking 88 small bales. My hats off to all the squeeze drivers out there.
Soft bales can make everything so much more difficult!!!!
12:40. Ice truck!!!!!
Been missing you, thanks for the video
Awww thank you!!
I use colored zip ties to mark where the hoses go. One on the hose one on the fitting. The oil takes the paint off easily
I only had one yellow pain pin. Not 5 different colored zip ties.
@@BalesHayFarmandRanch I understand that, just wanted to give you the idea in case you didn't think of it.
@@BalesHayFarmandRanch electricials have numbered stickers
Great video!!!
With fuel these days, is it still cost effective to deploy a duster rather then sprayer?
I'd love to see a Laura Farms(Laura vs. Grant) showdown!
or rodeo reed
I’ll tell them!
@@lyleswavel320OP
Rookie. Everyone knows you have to thank God, GoodYear and Gatorade after a race.
The Navy built N3N is a beautiful airplane.
Lol.
Too many interesting things to comment on.A great video
BTW i just realized Little Blue is throwing al the power through a single axle!You'd be able to spin the wheels at the speed limit surely?😁
Thank you!!! Yep! That’s why we tuned her down to 550.
Is the juice worth the squeeze
Yes. Maybe. What juice?
Just installed my Clerf last week. It’s a beast! But you may want to use a couple cans of WD-40 on the tubes to get it workin smoothly
I love them!!! I have 2 now!
Is colored zip ties work better.... to mark you hoses
I just needed it for a few mins. It worked great!
What crazy thing I couldn't see anything just a shed...
I see you needed the tools you work on a watch with. 🤪🤪🤪
Lol. A giants watch. 🤣
They call him Randy the master bale layer. 😁😁
That isn’t the place where they pull from that’s were it slides surely it pulls where the hydraulic ram is.
Nope.
Cool to see the plan with the trailer loading dock work out
Hi I need a squeeze to put on a 15000lbs forklift where should I get one from? Thanks
CLERF
Bale loading competition 2022
Wow Randy has lost some weight, looks much fitter now.
No worries, we all make mistakes.
I make a lot of them.
Oregons…They work and look okay but sure don’t last. Clerf clamps are great.
The clamp yes, but there are a lot of 70s, 80s, and 90s Oregons still running around and working.
Randy not only can lay some pipe he can also lay some hay... hes a mysterious being that's for sure 😂
Lol
That's quite the con, tell 2 guys its a race while they do all the work and you walk around talking to other guys meanwhile you get your trucks loaded all in the name of "Fun".
Stampede looks like the lowrider version of trucks- but classier. It is PDI after all.
Lol. Ssshhhh they still don’t know they were the one’s working.
Hey, Mr. Bails....please clean your window in your tractor...thought it was my monitor Putur screen and had to grab a towel and windexx....
We do. All the time. Gets dirty fast!
Stickin yer arms down inside the hydraulic section of a running forklift aint wise.
🤷🏻♂️
I always thought i was the master pipe layer but ok
Ha! That guy lays pipe by the mile!
I'd say a guy with the name Master pipe layer finishes first isn't a good thang wouldn't that be false Advertising. .lol
Hahahahs. Get your head out of the gutter. 😜
secound
If you ain’t first, you’re last!
Watching those 2 race was like watching turtles race for lunch 🤣
Lol.
First!
Dork.
This video has ADHD
Welcome to my life.