Will the 1/2 DONE RUDICON Make it to Moab???
HTML-код
- Опубликовано: 15 сен 2024
- The RUDICON gets ready for Easter Jeep Safari in Moab!
For business inquiries please email us at: info@rudysadventureanddesign.com
Shipping address: PO Box 2572 Colorado City, Arizona 86021
Shop Address: 1420 Uzona Ave, Hildale, Utah 84784
WOW... 114K SUBSCRIBERS IN JUST A FEW VIDEOS...
YOU GOT THIS RUDY...!!!!
KEEP DOING WHAT YOU ARE DOING...!!!
Now's the time.. capitalize on the elders popularity while it's hot!
OTIS ! Your a dog ! And....... you guys have a place in my heart. Thanks for sharing brother. Cudos !
I am glad you recognized the audio issues. Growing pains! Rudy! Rudy!
**Rudicon = looking great +++new helper = Cutie Pie!!!**
Glad you got the back seat put back in so I could hitch a ride at EJS! Great job on the rock slider paint job Janelle! The other stuff that was done was alright too.😉
Nice to see Trevor chiming in and adding support! You and Rudy have awesome chemistry on screen (but in a manly way...) and it would be cool to see you guys collaborate on some upgrades on the Rudicon. Former 12B here wishing all the success in the world for Rudy's new channel!
Just for you Trevor…. “Who is that young man? I like the cut of his jib?”
Whatever that means lol. Always good to see you chiming in to support Rudy.
“Finer than a frog hair …. Split four ways”.
So nice to meet Janelle💜👸💜 You two make a Great Team!🎊 So Excited to see Your Dreams come true!😎 GOD BLESS YOU ABUNDANTLY!🙏🏻😇🙏🏻
I'm so glad we have another channel to look forward to. Thanks Rudy!
"RAD is right!" first for Tshirt suggestion. The look on Matt's face in MORR's video after your climb was priceless.
Hey man. Loving the channel so far. Good work. Could you give us some back storey? What’s with the building ? Are u renting space ? What is that shop normally used for? Etc. etc . Keep up the good work
Half done looking great. Rudy good to see you have a Lady that doesn't mind helping you out good luck to both of you
Nice job dude! Love your shop, awesome setup!
Nice job Rudy.I like the purple....😁😁👍👍
Rudy is going to have a new appreciation for Matt it ain’t easy to be yakking in front of the camera all the time Matt for sure makes it look easy but Rudy is going to do well get lots of fans and sponsors! go Rudy toots!! We’re all rootin for ya!
Purple is the perfect color choice. I'm quite partial to it. Janelle is quite the cutie!
There always seems to be a ton of "last minute" things to do before a trip. I learned to give myself twice the time I think it will take. Even then it sometimes is not enough. Enjoyed watching you tackle the "getting ready to load" things!
Good job Rudy. When it rains it pours!! Always something to go wrong.
Keep up the content Rudy. Otis is too cute. Nice to see you had some help as well.
Don't worry, Rudy. The channel will get better as buy the equipment you need. MOR was a little rough in the beginning. You'll get it.
I LOVE THE SHOCK HOOPS! MY FAVORITE COLOR!
Rudy, no worries about the audio quality, your'e in a high ceiling very large cement block room with next to nothing soft to absorb sound, it sounds natural. Love the Purple! Keep having fun!
first time watching halfway through the video realize that was your daughter that is awesome as ever I wish my kids would get out there with me and help like that that rocks
so fun to follow your build along Rudy! Otis is a sweet pup. The grey/purple paint job looks great! Awesome contrast.
Well done, Rudy. I really appreciate your job.
The Sound is much better now.
Beyond stoked for you man! So cool to see you doing your own thing! Love the shop too! So much space for activities 😂
Great work and video, but if you have never been to the mideast or east; you haven't seen rust.
*Karate
Fixing things before they break ?? Trying to show up your dad ? That pup is funny. Good video.
As others have mentioned, please use a jack stand. Anything can happen. Safety is first and foremost!
Great job checkin off the list. 🤙😎
Liked the video and love including Janelle in your video. Most women won't go near a vehicle with a tool in their hand. Good to see more women working on vehicles.👍👍👍
Everything is looking great Rudy. You've managed to surpass 100K subs in a short amount of time. Your videos have some rough edges but you'll smooth things out in time. Oh, and everyone wants to know more about your nice lady friend!
i like the natural ''raw'' vids
@@lomni02 Glad you said that. I was watching this one world travel channel and the quality was really good and enjoyed their vids until they started showing outtakes and come to find out it's all staged with multiple takes to "get it just right". kind of ruined it for me.
He's piggybacking on Matts channel.
Most of us know him from there.
@@dubious6718 I"m not sure I would call it "piggybacking". that makes it sound like he is just riding on Matt's popularity. He started this because Matt encouraged him to. "piggybacking" may be the mechanism to get him subs but not his intent.
@@AffordBindEquipment But that's what he's doing, and this is how I have found new channels to watch. I found Matt, then I found all the other channels when they got "promoted" on Matts channel.
Rudy is the best fabricator of the bunch. Paul does really good too and everybody is talented but Rudy is on a different level
Love your fabrication skills , and I do like the purple as that was my Moms favorite color . I do love your videos , Rudy .
That purple looks awwwwwsome!
It’s sounding a lot better, the first one I had to turn it WAY up. Just look back to the early videos of your dads. It takes time and you have a good mentor. 👍
Really does this time.. those long shots in previous productions were off a bit.
Hi Rudy, I like your understated presentation and quiet background music. Best wishes, English John
Awesome brother good luck still waiting for the Rudy's extended cab Corviar cab wrecker project RAD FOREVER NEVER AWESOME BROTHER CONGRATS Tiny south Ga buggies forever Amen
good job RUDY LOOKS GOOD CANT WAIT TO SEE FINAL PAINT AND ALL
I am guessing that after you finally pull off the blue tape for the 1/2 dun, the actual paint underneath the tape will still say 1/2 dun.... Ask me how I know...
Great show Rudy and Janelle and Otis!! I am in agreement with a few other comments, get some jackstands! I think you are doing a great job with your channel! Thank you all for sharing! Please stay safe and keep the videos coming. Jim
Boston!! I love Bostons. my little shop buddy is a Boston :). Can't tell you how many times I got U-joints missing hardware (or wrong hardware). I got in the habit of opening the box at the parts store. Your channel is off to an awesome start! It's all about the content...the gear will follow later. Keep it up! Hope you had fun at EJS!
Yep, check before you leave the store. I've handed "new" starters right back to the parts guy after opening them in the store. Glad I did that in the store, vs. at home half an hour away.
You made your dad's channel and he is making yours. Lucky kid. I hope you give Matt (Dad) the respect he deserves! But I think you do. Have fun at EJS. Can't wait for the footage!!
Glad to see you're doing your own thing! Otis is cool too!! I have Boston's too,😉 good job!!
Good thinking covering the Battery when welding. Many don't at their peril. Lovely Helper. Always consult with her when choosing paint colour or barber. Always were safety glasses when removing 'Jesus Clips' . Those U-joints didn't happen overnight. Just Sayin'. Grease the spline and remove that zerk fitting 10:10 and put it into the U Joint..
Complete the bracket weld at 4:50, -both sides for control arms. *"JACK STANDS"* Audio is Fine. Pinion Angle? Should point slightly up for those Cordon Joints I believe.
Loving the channel brother. Introduce your other half man. Miss seeing you on m.o.r. but your killing it with the new channel. Keep up the awesome fab 👌
yea who is that assistant .
Absolutely! Nice to have a little background on the various characters. That can be one of your differences from Matt's shop where virtually nothing is ever explained about the various people involved.
Good job Rudy. No to thrilled with the hose clamp shock mount?? They will fail at some point, so when you get back, cut a piece of round stock in half and make two shock beds to put them into! !! !!! Stay vertical.
Way to keep on fab’ing and wrenching. Jeep improvements are impressive. Thanks for the vid.!!!
If you paint the whole Jeep purple. You could call it a the egg plant, or plum. The color you chose is GREAT!
I love how the shock mounts come through the hood... 👍 👌
Good job. Nice helper too!!!! Hope Easter Jeep Safari was good to you!!!
Great content sir. Nice to see you on your own. Using the forklift until you get a 4 post lift or similar. Keep up the good work and stay safe!
Hi Rudy and congrats on 117K+ subscribers already. I'm one of them of course. Been watching you and your dad in his vids from the first ones. I love that you now have your own channel. It's gonna run.
Your helper could use an introduction, please and thank you.
Don't get under that machine while it is only held up by the fork lift! I almost sh*t myself when I saw that. Jack Stands are mandatory, especially if you're working alone.
Cheers from your Dutch Uncle in E. Ontario!
HEY!! RUDY! Good to see you and of course thumbs UP to you! 👍
Never underestimate the importance of, "The Cool Factor". The Rudicon is definitely VERY cool!
I’m glad you’re making these vids bro!!
Cool Rudy! Thanks for the upload!
Rudy, I'm so glad you post your videos on a different day than everyone else. It's to much of a time suck when everyone posts at the same time. I really hope your channel takes off fast just keep the videos coming.
Stay safe healthy and happy 👍
Great stuff with the Purple, always been my favorite color!
Hi Rudy, jeep looking great, love the pure paint, hi janelle and OTIS, Audio is fine Honestly. Congrats on channel keep up the good work. 🇦🇺👍👌
Good to see the Rudicon getting some much needed lovin.
Imma say it again (because I think I am right lol) Even when the Rudicon is finished it will not be finished, crawlers are never finished and 1/2 Dun Rudicon is the perfect name for a crawler built by you. That is all lol. Love then content on your personal channel and I am very excited to watch it grow.
Agree 1/2 dun Rudicon should be it's name.....
What does imma mean?
@@joedavidson4486 IMMA is "I'm Going To".
Is a slang.
@@krovuz1232
Oh, I don't speak ghetto.
I still don't see how it translate to "I'm going to" but whatever. 😂
@@joedavidson4486 is not ghetto, it's county. Like fixin to.
You should do a sit down with the camera and tell everyone what you've got going on now and what your plans are. Love the channel. Miss seeing you on MORR.
Looking great Rudy! Glad to see that you're going to make it to the Safari.
OTIS!!!!! ❤️❤️❤️😍😍😍❤️❤️❤️
Bosties are the best!!
Looks like you are making good progress. Like any Jeep I don’t think it will be ever fully done. 1/2 done seems like a permanent name.
You are just getting started Rudy. Cameras & audio will come. Have fun at Moab.
Hope the trip goes smoothly for you Rudy.
Lookin good Rudy👍😎lovin Otis🐾🐾
I commend you for going out in your own RUclips channel. Looking forward to seeing how you do at Moab!
Rudy's channel is like maybe 2 weeks running now and its already at like 125k great job Rudy I'm glad you are finally making your own RUclips money that way you can keep on doing what you love and recording alot of it fir us to love too lol love this channel just like ,fabrats,Matt's,, Robby Layton ,trail mater, Casey LaDelle who am I forgetting lol
excited for this channel man! can't wait to see what else you're gonna be posting.
A French bulldog is a dog, if you didn't know, now you know 🤣🤣🤣 Otis is cute 🐶
The Rudicon is coming along great, we've waited so long for the Rudicon to be fully done. 😊👍
Just a little tip. When tightening a nut and bolt. Turn the bolt in then turn the nut to tightening the 2. It takes more friction and force to turn the bolt. It also tends to Gaul the bolt weakening it. Love the show.
Your not wrong at all. But those shock bolts don't need to be very tight, hence the nylon lock.
Rudy looks nice And Janelle very nice paint
Love that you have your own channel can't wait to see any new mayhem.... don't worry about sound that's only minor details lol keep up the great work
Just a little tip when you're doing some paint work in a tight area if you don't feel like taking it all apart mask it off with aluminum foil it conforms really well it keeps the paint off of what you don't want it on and it's real quick
I’m loving your videos, Rudy! Can’t wait to see more!
Bold Colour Choice!!! I love the purple... the rest of the vid is great too.
Love the Boston Terrier! That’s the breed we had when I was growing up. Great dogs!!
It's looking mighty fine. I hope that Rudicon preformed well for you.
Hi Rubicon is looking tuff you're channel will take off huge thumbs up from Australia 👍🇦🇺
Love Otis! Frenchies are SOOO cute
Great you have your own channel, love to watch it. And nice that your girlfriend and dog are also in sometimes. Keep it up!
Big huge hug and lots of petting for OTIS!! Looks like a great shop doggo!
No worries about the audio Rudy! The videos are great and will only continue to improve with new camera equipment!
Like you channel Rudy, and your girlfriend helper. But you are always a ray of sunshine on Matt's channel!
Hey Rudy , I thought that you were going to use the cinders to encase the reservoirs by siding them into the cinders , but that worked out well. Have you decided on the color for the jeep? Your girlfriend did a great job on the rock sliders, I still like those 40's, you guys have a great time at the Easter event and show us the video, later from Texas 🤠👍
I think you're doing a fine job. Don't worry about the rough edges that's just growing pains. Keep up the great work and stay safe.
Good job on your new youtube channel. If you would like a little tip. Never use a hammer on u joints. They will fail far sooner than if you use press them in with some oil. At least that has been my experience.
And sometimes, you can press them in with a vise too !
And sometimes, a hammer is all you have.
Nicely done sir Rudyard.
You need to use some sort stand when you are lifting your rig with the forklift...if a hose or something fails the mast and fork carriage will drop like its hot squishing smushy parts : (
sorry, just being a dad...keep the videos rolling in, you are teaching an old dog new tricks ; )
That purple looks great.
Hey Rudy, I have followed you from Matt's off road recovery .
Watching you on that channel was great.
You have excellent fabrication skills and are super good at rock crawling.
In the video titled " we could have died" I think that you could have driven that SUV out of there without a recovery but your Dad probably had to bite his lip while you drove that thing down.
It be really cool to stand on the side of that hill, or sit in a car on the side of it. I feel like it has to be worse than what I’m imagining
Congratulations Rudy on your new channel!
Another suggestion, add music to the parts where you are working. See Cleetus McFarland for examples. Any chance you could give the back story to your shop? Looks like you have a metal fab shop, lots of gates and stuff. How long have you been doing it? People like stories, let your own personality come out. Keep up the good work 👍🏻
I was wondering about the shop too.
i am sure he will develop his own style in time. Its hard to figure out what you want to do without just doing it and making adjustments. Cleetus's production now is way better than it was even a couple of years ago. Same as MOR.
If you do add music, don't make it double volume like most people do.
The TV surround sound makes my windows rattle when the music suddenly starts to blast.
@@dalegereaux1863 Best comment.. easy on the background music! 🤜💥🤛
I think music should be limited to sped up sequences. I want to hear the rest as it happens.
awe... seeing Otis makes me miss my Boston, he was named Tater. had to be put down due to colon cancer. spread his ashes by a lake where we used to live, right by one of his favorite spots to go.
Loving the channel! Keep em coming!
That was the most gentle rust removal Janelle was doing that I have ever seen. Really enjoyed the content.
Cool to see the work on your own channel. Like the choice of that deep purple too; wouldn't have thought of that combo, but seeing it, it sure looks good. Man those U-joints were bad though - bet you glad you didn't head there with those still on.
Rudy this is so great to see didn’t realize you were getting your own shop too! Also enjoy the little detail of RUclips background music it’s not just “country slide guitar” not that I don’t enjoy either it’s just refreshing to hear some very low volume beats haha
Understand the need to relocate the fluid reservoir but now you've introduced another issue as the hydraulic hoses will rub on the underside of the hood.
Another consideration is the heat from the engine bay heating the fluid. Maybe that isn’t a big deal but just my thoughts.
Yep, that was my thought as well.
Wow your subscriber numbers flew up and over a hundred thousand 👍that’s awesome. Hope Easter jeep safari is a blast.
Let's hope your UJs last better than my record of 10 (yes TEN) miles of Staffordshire's finest gloopiest stickiest mud before one handed in its notice and totally failed with a broken spider....
(One advantage of our mud is you aren't going very fast even if the torque is off the monster end of the scale, so shafts don't spin for very long)
another name that part with Michele so much fun. lots to learn together