Steve supplied me with the emblem lights and Ezcam for my 2016 BMW R1200RS. They arrived to my door in New Zealand just as fast items from local suppliers. After a couple of glitches in the programming, I emailed Steve for help. He was able to give me the fix to the installation that I needed very quickly. Once I corrected the connections everything functioned extremely well. Having white DLR's on the side of the bike, that also work as Yellow indicators, increases safety immensely.
I just received and installed the new PNP version. Awesome. I ended up shortening the run to the front "T" cable as i did not want the extra cable under the seat. They work great. Thanks Steve!
The current emblem set (2024) has the white plugs already attached to the end of the cables so you need to drill a 12mm minimum hole behind the BMW badge to allow the cable to pass through the hole, but i would recommend to start with a small size drill & increase to 12mm or you will potentially cause damage to you panel
Inmate! Always chuckle on that one!😆😆 Looks like I need a newer bike 😞The only update I can give to my R1200GS Adventure from 2011 is a full tank of gas.
On the Africa Twin could you just use the Denali T3 specific adapter for the CRF1100L front turn signals? You could plug the T3 connectors from the emblems directly into the factory turn signal wiring and still be completely plug and play without an ezCAN. The only potential problem I see is if they draw too much power and give a fault. I want the amber DRL and flash, and don’t mind not having the ability to dim them.
Love, love, love the plug and play stuff. Will definitely be ordering the the emblem AND D3s when my new 1250gsa arrives (about 2-3 months) along with Denali lights and horn. How can I see all your products you offer..... is there a list or catalog on line?
In a previous video you had mentioned that Hex was going to release an expansion ability to its software and Bluetooth. With your relationship, has there been an update on eta when we can expect the improvement. I have an EZCan on my R1200RT and would like to expand! Great channel and always look forward to your new content.
Wait a second, T3’s are acting as a amber DRL?! I want to buy Denali’s amber DRL and to install them on my hand guards but I see here that your T3’s can also play the role of the amber DRL? Originally, T3’s come as white only DRL. How can I do this so that I dont have to buy amber DRL’s that are even more expensive and much more “in your face”?????!
hi stave . great video and cool plug and play set up. one question ther are three plugs for this set up 2 for turn signals with 1 wire each and one for the drl's with 3 wires . one wire is gruond one wire is the drl and what for is the third wire ? thx p.s at 18:55 at the wiring diagrame i can see all three wires are connected but at 21:53 i can see at the drl plug that there is a pin missing .
3 wires; positive, ground & pwm - this is the wire which sends the switching signal to the light; whether its to flash with indicators, switch off, or in this case switch to flashing amber.
We’re not a shop so don’t have products on shelves to browse. We’re mail order and have everything in picking boxes on racking as you’d expect to find in a warehouse. Customers are welcome to visit and say hello or come and collect goods that they’re planning to buy or have pre bought on the website. Maybe end of 2024 we have plans to expand again and have an actual shop.
Hi, this means the ones you have are over 2 years old. You’ve made this question publicly available too so I don’t want to go a make a stick for my own back and imply we can do this. If we do some will think 🤔 maybe the emblems I buy from abikething are 2 year old returns. What we can do is take yours back and we’ll fit the plug and play plugs to them FOC. Email us via the contact page and get the ball rolling on this. Dont reply on here as we may not see it. RUclips are good at notifying me of new comments but not replies.
Hi. I installed the d7 a few months ago. now i have the problem that the left side flickers at 30% power. but not at full power and under 30%. and the left one also flickers when I connect it to the right. What could be the reason for this?
Your statement / question doesn’t make sense. Are you talking about D7’s or Emblems? This isn’t a good forum for after sales support. Email us directly if you bought your equipment from us and we’ll try our best to assist
Steve supplied me with the emblem lights and Ezcam for my 2016 BMW R1200RS. They arrived to my door in New Zealand just as fast items from local suppliers. After a couple of glitches in the programming, I emailed Steve for help. He was able to give me the fix to the installation that I needed very quickly. Once I corrected the connections everything functioned extremely well. Having white DLR's on the side of the bike, that also work as Yellow indicators, increases safety immensely.
I just received and installed the new PNP version. Awesome. I ended up shortening the run to the front "T" cable as i did not want the extra cable under the seat. They work great. Thanks Steve!
The current emblem set (2024) has the white plugs already attached to the end of the cables so you need to drill a 12mm minimum hole behind the BMW badge to allow the cable to pass through the hole, but i would recommend to start with a small size drill & increase to 12mm or you will potentially cause damage to you panel
I’ve sent this guy two emails over the course of three weeks asking a question prior to buying. He doesn’t answer. I wouldn’t waste time w him.
I didn’t have the same experience as yours
Oooh, I have a Golwing Tour DCT and a K1600GTL. Sounds like I need both!
i would be quite happy to get my 2020 XR in for emblem fit and you could video it for your channel?
Inmate! Always chuckle on that one!😆😆 Looks like I need a newer bike 😞The only update I can give to my R1200GS Adventure from 2011 is a full tank of gas.
Hi steve ! Would you be able to do a Bundle for the new S1000xr 2021 ? Appreciate it
It's just beautiful. Installed on my Africa Twin this week
On the Africa Twin could you just use the Denali T3 specific adapter for the CRF1100L front turn signals? You could plug the T3 connectors from the emblems directly into the factory turn signal wiring and still be completely plug and play without an ezCAN. The only potential problem I see is if they draw too much power and give a fault. I want the amber DRL and flash, and don’t mind not having the ability to dim them.
Love it. If I could afford a GS....I'm bringing it here.
Dope shit. I don't own a GS or a GSA but I keep up with your videos.
My 2022 BMW K1600GTL has an emblem around 80mm across, are there any plans for making the larger newer size? I noticed the largest you offer is 74mm.
I just used a de-pinng tool and removed the ground pin from the DRL plug and moved it to one of the emblem plugs at the cansmart and problem solved
Love, love, love the plug and play stuff. Will definitely be ordering the the emblem AND D3s when my new 1250gsa arrives (about 2-3 months) along with Denali lights and horn.
How can I see all your products you offer..... is there a list or catalog on line?
his website, which he links in the description
@@focus550 thanks bob
In a previous video you had mentioned that Hex was going to release an expansion ability to its software and Bluetooth. With your relationship, has there been an update on eta when we can expect the improvement. I have an EZCan on my R1200RT and would like to expand! Great channel and always look forward to your new content.
Nice Just ordered for a Honda Africa . Good luck
Just ordered some!!
so awesome
Steve, is the plug & play emblem compatible with a 2022 1250 RT ? Also the basket for the plug &play did not for me.
holly cow your expensive how the heck do you justify such a high price
I don’t
Steve, is the plug & play emblem compatible with a 2022 1250 RT ? Also the basket for the plug &play did not for me. 4:59
Wait a second, T3’s are acting as a amber DRL?! I want to buy Denali’s amber DRL and to install them on my hand guards but I see here that your T3’s can also play the role of the amber DRL? Originally, T3’s come as white only DRL. How can I do this so that I dont have to buy amber DRL’s that are even more expensive and much more “in your face”?????!
Hope to see it soon for Vstrom650xt
If I order an Denali S4 bundel for anything with 12V from the Netherlands, what would be the delivery time?
hi stave . great video and cool plug and play set up. one question ther are three plugs for this set up 2 for turn signals with 1 wire each and one for the drl's with 3 wires . one wire is gruond one wire is the drl and what for is the third wire ? thx p.s at 18:55 at the wiring diagrame i can see all three wires are connected but at 21:53 i can see at the drl plug that there is a pin missing .
3 wires; positive, ground & pwm - this is the wire which sends the switching signal to the light; whether its to flash with indicators, switch off, or in this case switch to flashing amber.
İ dont understand what am i to buy. İ have a 2022 k1600b and just want white drl ring with amber turn signals.İs t3 necessery?j
Will these work with the Denali CAN Smart controller?
Thnk u very helpfull your very nice content.....
Is it possible to install these on a 2016 R 1200 RT?
Are these compatible with “Clear Water” lights?
Can people visiting the area, visit the shop in person?
We’re not a shop so don’t have products on shelves to browse. We’re mail order and have everything in picking boxes on racking as you’d expect to find in a warehouse. Customers are welcome to visit and say hello or come and collect goods that they’re planning to buy or have pre bought on the website. Maybe end of 2024 we have plans to expand again and have an actual shop.
Can I return my old style emblems which I have not installed and get the new ones?
Hi, this means the ones you have are over 2 years old. You’ve made this question publicly available too so I don’t want to go a make a stick for my own back and imply we can do this. If we do some will think 🤔 maybe the emblems I buy from abikething are 2 year old returns. What we can do is take yours back and we’ll fit the plug and play plugs to them FOC. Email us via the contact page and get the ball rolling on this. Dont reply on here as we may not see it. RUclips are good at notifying me of new comments but not replies.
The emblem on the GS 1250 is 70mm ?
Hi. I installed the d7 a few months ago. now i have the problem that the left side flickers at 30% power. but not at full power and under 30%. and the left one also flickers when I connect it to the right. What could be the reason for this?
Your statement / question doesn’t make sense. Are you talking about D7’s or Emblems? This isn’t a good forum for after sales support. Email us directly if you bought your equipment from us and we’ll try our best to assist
Hope more plug and play than KTM hexcan
Is BMW f900r supported?
Sleeves look too small too short
Too much lights, it’s seem an Pakistani truck ….trash!
🅿🆁🅾🅼🅾🆂🅼