Where can I find a replacement strap? What strap width should I buy? I'd really like to change for a fabric strap, the plastic ones make me sweat too much...
Great video thx! I just need to replace the rubber cover. Are you calling that the bezel? I didn't see you remove that part, but I am assuming all you have to do is remove the first four screws in this video, take the straps off, and then pull off the rubber cover?
I wish it will be possible to put a combi bracelet with a clasp on it. I just hate the regular straps it comes with it. Or can it be possible? Or any other bracelet with a clasp?
Hi, i love your videos. I have one question, can you put a combi bracelet in GBD-200? If you think so, witch one? Thank you and keep doing more videos.
Hi. Will the mechanism with MIP screen (entire white part) from GBX100 will fit to bezel of GBD200? I am thinking about it since the lime version looks much better than all orignal version of GBX100 :)
Hello, is it possible to remove from the black casing this artifical "button" with red line? I would like to have it (to buy it alone) and mount on GDB-200-1er (black version).
Hmm... I got here looking up if I could invert the display, still looking to see if it's any different than the old school process (like if there are any parts needed).
Can you try putting gbx 100 engine/module inside gbd 200 case/housing to see it fit or not? Like the gbx function but not its look. Certainly will buy gbd 200 if it has gbx 100 functions
I just let the mini electric screwdriver lock it till it stop, then I tighten it a bit like 10degree more or something. Just by feeling the tension. Definitely not too tight.
Same. I keep searching for replaceable/custom buckle but sadly found nothin. If only the buckle is steel. Back of my wrist feels itchy touching this plastic buckle
I have the new bezel and band and man I'm not gonna lie this seems like a lot of complication for a simple mod , my dwh5600 the bezel literally can come right on and off you can change it multiple time in a matter of seconds
WTF was Casio thinking about when they designed the resin for this model? This is a very bad design for Casio to place the screws for the resin cover behind each button. It makes it impossible to replace the resin bezel unless you open up the watch and take the module out and then remove each of the 4 button clips that are attached to each button from the inside of the watch case and then completely remove each button from the watch case in order to get access to the screw on the resin cover in order to remove the resin cover from the watch case. WTF!!! This is a VERY horrible design and it makes it very hard for owners of this particular GDB-200 G-Shock to replace the outer bezel when their outer bezel gets old and cracks or breaks off the watch case. Most people do NOT know how to do this type of extreme disassembly to replace the outer rubber bezel on this particular model G-Shock. What a F'k'ing mess that Casio created when they designed this G-Shock.
*Put tinfoil hat on* They make it an inconvenience so that some people would just not mod their gshock and just buy different color instead. Older gshock didn't have the same design because back then, custom replacement parts is very hard to come by. Today, is different story. Also check my recent Rangeman disassembly, you'd be pissed even more.
@@gshockhighfashion I never thought about that. You're right. Casio made this particular model very hard to replace the exterior resin bezel in order to deter people who own this model from modding it.
Links to replacement straps, bezel and other modding items for GBD-200 please 😊🙏🙏
Nice vid. Can you let us know from where are the replacement is parts are coming from?
Says buyee but i dont see parts for it. So its not from there
You can Google.
Wow! The black looks awesome! ❤ Wish they released it like that.
Always looking forward to your disassembling and resembling videos.
Don't see that much from other RUclips channel.
Thanks!
El relojero too
Where can I find a replacement strap? What strap width should I buy? I'd really like to change for a fabric strap, the plastic ones make me sweat too much...
I'm 2 years late but get jays and kays strap adapter for this particular model and buy any 22mm straps
Some of those replacement parts look really interesting and nonstandard. Where can you buy those?
Great video thx! I just need to replace the rubber cover. Are you calling that the bezel? I didn't see you remove that part, but I am assuming all you have to do is remove the first four screws in this video, take the straps off, and then pull off the rubber cover?
Neverrmind sorry! I finished watching the video and saw how you did it.
Thank you 😮💨, i was worried about water going in side the case 7:25 but it’s just a rubber and watch has another protection layer inside that
Is there a regular strap adapter kit for this watch?
Thanks for the video!
love the black bezels 👀
Where can you get good mod parts for the GBD-200? I have not seen any.
Good video
So at the moment there are no straps for the gbd 200?
Thanks
I'm sorry about my English, I don't know much
Hey! thank you for your awesome videos! i was wondering would a GBX movement fit in a GBD Body? 🤔
Yes it does
are there nato strap adaptors for this model? would love to put on a nato strap instead!
Id like to know that as well!
I wish it will be possible to put a combi bracelet with a clasp on it. I just hate the regular straps it comes with it.
Or can it be possible? Or any other bracelet with a clasp?
hi bro..
can the GBD200 change strap to the casio black composite bracelet ???
The screws holding the straps don’t “stop” when you screw them in all the way, is this normal?
i'm gonna get a G-Shock if they use that MIP Display in a classic Square Model
Mee too.
Don’t wait. Just got one a few days ago. Instantly makes the others look outdated.
Hi, i have a question. Can you put a combi bracelet in a GBD-200? Thanks and god job on your's video
Have to disassemble the entire thing, including buttons, to replace the outer shell?
any chances on mod this polarizer to positive rather than negative sir?
are the wrist bands on GBD 200 interchanable with GBD 200SM-1A5?
Hi, i love your videos. I have one question, can you put a combi bracelet in GBD-200? If you think so, witch one? Thank you and keep doing more videos.
Hi / question can I switch a band from a casio GBX-100 to a GBD - 200 band
Thanks in advance
Are you wearing a GST-B300? Great watch too!
Enjoyable and interesting upload, thank you for sharing 👍😀
hi, i just love your videos, do you think that you can put same sort of combi bracelet in this GBD-200 ? thank you
For the upcoming DW-H5600, do you think it will be possible to remove bezel altogether to make slimmer?
Most detailed video!! Thanks!! Any idea anyone what model’s straps are the most close to these?? They are waaay to long😫😫
THE MOST DETAILS VIDEO . THANKS SOO MUCH ❤️❤️❤️
I love the watch but the strap is so bad.... and I cannot find any after market strap :(
Lost one e-clip, any where I can buy a replacement?
Hi my illuminator button has fallen out! Do I need a new case as it doesn’t seem to click in or attach it just falls out. Cheers
Hi. Will the mechanism with MIP screen (entire white part) from GBX100 will fit to bezel of GBD200? I am thinking about it since the lime version looks much better than all orignal version of GBX100 :)
Do you get the answer yet?
It dose, its been done before.
@@JohnSmith-ef8nr Thanks. Short answer but clear :)
@@danielsamile878 Check the answer below. It seems that fits
Hello, is it possible to remove from the black casing this artifical "button" with red line? I would like to have it (to buy it alone) and mount on GDB-200-1er (black version).
Hmm... I got here looking up if I could invert the display, still looking to see if it's any different than the old school process (like if there are any parts needed).
Loved the video! Can you recommend anywhere for new straps and wings?
Do you use the tweezers to put on again the clips?
Thanks for this Video. Question: do I really have to remove the strap to change the battery, or can I do it without taking them off? Thank you.
You don’t have to remove the strap to change the battery.
How do you get the washers back on?
Where did you got the bezels from?
Says buyee buy i didnt see any on site. No info found
I lost the piece that holds the buttons inside. Do you know where I can buy?
Where do you get all your parts to mod this?
Shoppe.. 😅
Ako se posle 2 meseca već isprlja sa žutom bojom; možda je meni zahvaljniji plavi koji će se manje prljati kod gb 200..?
Why no link for replacement parts?
hi, where did you buy the accesories? thank you'
Can you try putting gbx 100 engine/module inside gbd 200 case/housing to see it fit or not? Like the gbx function but not its look. Certainly will buy gbd 200 if it has gbx 100 functions
I think cannot.. Gbx is Thicker then gbd.. 😅..or gbd is thicker..they Seems like
Can I replace the metal bezel of the g-shock gbx-100 with the resin one of g-shock gbd-200?
I wanted to use a nylon strap on my GBD 200 what do I need to make that happen?
Does this watch need a screen scratch protector
Is the body cage metal or plastic?
How tight do you go on case screws? I dont want to compromise water resistance.
I just let the mini electric screwdriver lock it till it stop, then I tighten it a bit like 10degree more or something. Just by feeling the tension. Definitely not too tight.
Buckle GBD100 n GBD200 same size or not?
Hi, nice video, can I know, what brand screwdriver you used to.?
No specific brand, I just bought them from aliexpress man. Works just fine
Where can i find mod parts for this gbd-200?
Been searching and i cant find any link for the parts
What do you used for cleaning
I really want to change my gbd200 color but unable to find strap and case
Can you let me know when you find it? İ cant find in buyee
gbx100 can use gbd 200 strap ?
Where i can get another frame and belt for this model?
What cleaning solution did you use?
Just dish washing liquid.
Where do you buy that wings strap?🙏🙏
Luckily for me I can get them from local re-seller. Most of them are on facebook groups, not sure if they would shipped internationally.
Does anyone know if there is a NATO strap adapter that would work with the GBD200?
Anyone else having issues with the buckle? Mine feels super cheap and has raised edges on the bottom thats irritating my wrists..
Same. I keep searching for replaceable/custom buckle but sadly found nothin. If only the buckle is steel. Back of my wrist feels itchy touching this plastic buckle
Same here - hate the buckle irritation and the plastic strap. With they’d made it easy to use adapters like the classic Squares.
Where do you get replacement wings?!
Third party part from local resellers. Not sure if it is available online of not, maybe on facebook groups
Nice
I lost 2 retaining clips for the buttons does anyone know if you can get them anywhere?
You'll need to scrap from any Casio watch. They uses the same clips. Buy the cheapest watch you can find, scrap, and sell the rest
Great video 👍
Why make a video about modding the watch with no links to the parts WTF
It's ridiculous
Can the watch be worn with the wings removed?
sure can, but it wont be comfortable
@@gshockhighfashion I would like to buy this watch but I worry the wings would pinch my arm hair. I really don't like that.
Do you know anyone can modify the movement to fit in a king bezel
Please do GBD h1000 teardown video..
Is the cover of gbd200 and gbx100 interchangeable?
Not possible. Their hardcase size & design shape is totally different.
Where did you get the mods????
Can we change the strap on this watch ?
Follow how I disassembled it to swap the band.
nice
I think it looks better without the bezel
huh, slimmer & simpler but there's a protruding thing on both sides that makes this idea impractical I think
Amazing video!!
Glad you liked it!
Buckle irreplaceable how sad or how to?
I WANT METAL FOR THIS!!! :D
I have the new bezel and band and man I'm not gonna lie this seems like a lot of complication for a simple mod , my dwh5600 the bezel literally can come right on and off you can change it multiple time in a matter of seconds
I agree it is too complicated to swap the parts!
Please tutorial change display negatif to positive display gbx 100 or gbd 200
Please I can't seem to remove the buckle 😢
Dip it hot water to soften the resin buckle a bit, use a reverse plier and just force it apart.
@@gshockhighfashion thanks so much!
Silicon oil Mod please
@7.14 .. the cat disagrees
Boss open both inside watch model GLX6900XA-9 IN4MATION RASTA ONE LOVE
When you have too much time on your hand
Ahh good old days..
To bad there wasn't a video to make its Bluetooth connection not suck a$$
WTF was Casio thinking about when they designed the resin for this model? This is a very bad design for Casio to place the screws for the resin cover behind each button. It makes it impossible to replace the resin bezel unless you open up the watch and take the module out and then remove each of the 4 button clips that are attached to each button from the inside of the watch case and then completely remove each button from the watch case in order to get access to the screw on the resin cover in order to remove the resin cover from the watch case. WTF!!!
This is a VERY horrible design and it makes it very hard for owners of this particular GDB-200 G-Shock to replace the outer bezel when their outer bezel gets old and cracks or breaks off the watch case. Most people do NOT know how to do this type of extreme disassembly to replace the outer rubber bezel on this particular model G-Shock. What a F'k'ing mess that Casio created when they designed this G-Shock.
*Put tinfoil hat on*
They make it an inconvenience so that some people would just not mod their gshock and just buy different color instead.
Older gshock didn't have the same design because back then, custom replacement parts is very hard to come by. Today, is different story. Also check my recent Rangeman disassembly, you'd be pissed even more.
@@gshockhighfashion I never thought about that. You're right. Casio made this particular model very hard to replace the exterior resin bezel in order to deter people who own this model from modding it.