Best video for sure. I just changed my DW5600e using this video as a guide. Only tricky part for me was unlocking the battery... maybe I was being too gentle...but I got it eventually. $1 Duracell and a $7 thing of silicone grease and I'm good. The BEST watch in the world to me I'd back in order! I've worn the same watch since my basic training decades ago. My watch repair shop closed this past year (coronavirus) so I had to learn how to it on my own. Toughest watch in the world to me. I never take it off...fresh and salt water, fishing, banging into stuff, mud races, painting (and paint thinner!) And blood, guts, grease, and anything else I get into... this watch shines.
@staypositive301 battery version is mine. Always stayed with what worked from basic training in the 80s. Can't say anything about solar...never had it. Good luck, great watch!
@@Motorcyclewindtherapy oh. Some youtuber mislead it last for only 2-3 yrs depending upon usage. But if this watch uses CR 2016 battery then it should atleast last 7yrs on more... I ll opt for battery version bro!
i just watched a video where you couldn't see the work being done because the straps were blocking the view... i was like, why would you even post a video like that? then i found this video -- the strap flip is genius!
Great video. I just replaced my battery thanks to you! Appreciate it very much. You’re very meticulous, I love it. No talking, just your mysterious black gloves and subtitles 👍🏽🙌🏽
Great video! It felt hard to find a trusted place to get the battery changed so I was tempted to do it myself but was worried to damage the watch. With this video it made me feel very confident. I was able to change it now in 15 minutes. I skipped the o-ring refurbishment as I do not have the product. I used a needle to unlock the battery and it went well. For the small coil I was careful and it stayed well in place. For the AC reset, I used an old copper wire and could have used a paper clip. I noticed my battery was low because the backlight no longer worked and the digits fading. It now works like a charm. Thank you!
@@faraaz1541 I did not put my watch purposefully in the water since but have used it normally and it works fine. Of course, if you can refurbish the o-ring it will be better.
The O ring has to be replaced , it stretches under pressure from screwing down the back plate , and will render the watch not being water proof , just wearing it in the shower will be enough to cause water ingress. I speak from experience.
This is the best video that I've found, really good camera work close up. I feel confident now working on my G-Shock. This person's a pro who's probably done dozens of these. Thank you for helping.
Those rubber gloves would have saved one of my Casio Marine Gear MRT200 when I attempted to change its two batteries. At a giving moment while handling and trying to fit the batteries in their slots I felt a tingling on my finger and I thought it could have been a electric discharge. My LCD display was never the same again. It is unstable, blinks, the numbers disappears and appears when changing functions and the batteries do not last a week. Be careful not to short yours! I did not believe I would!
I just replaced the battery on mine DW-5600E yesterday after 10 years obviously, I cleaned and applied the silicone grease on the gasket the watch is running like new ready for at least 5 + years on an energizer 2016 battery awesome video.
Awesome tutorial. Only thing I'd add is be very careful of the alarm spring. You can see it clearly at 07:21. Controls all the sounds the watch makes. It can fall out, and good luck finding it 😁
If you take that out the watch doesn’t be able to make any sound no more, until you put that little spring back in its position in the module. If you lose that you can extract a new one from a spring bar for watches’ metal bracelets. Just cut one of the two extremities of the spring bar and collect the spring from its own inside. Than place it on the module of your Casio et voilà, les jeux sont fait: you have your Casio that can make every sound again
This guy wanted to be a heart doctor He's the assistant cook on the night shift over at Denny's I learned what I needed to know / thanks for posting this
I think I'll just take my watch to my local watch repairman when I need a battery replacement. I'd be afraid of damaging my watch. But it was still cool to see exactly how the battery replacement is like. Thumbs up on the video!
I have 2 places near my place of work that have very competent watch repairmen. I've had G-Shocks repaired by them and they've been awesome. But I'll definitely keep your advice in mind if I have to get my watches repaired somewhere else.
And I will try to extend the battery life so that it outlives the watch. Use the light sparingly, and don't use alarms often. FYI, my first G-Shock battery is in its 7th year. Only the light does not function.
This guy is a professional who does it so skilfully, diligently, even cleaning the back case, rubber gasket and reapplying silicone. If you go to a watch repair shop to replace the battery, do you think he will bother to other than simply replacing the battery and screwing the case back in place? I wish he would, but I know he wouldn't.
@@Myrslokstok I am sorry to hear that. By my experience, it's best to replace the battery of the watch at its authorised service centre. Only they will clean the internals and reapply silicone for waterproofing. It will cost a lot more, but it is the only way to retain the integrity and well-being of the watch.
James S Yes offcourse but there are no such in Sweeden for Bulova. Considering the ceep price like $250 on sale, it was not worth the $80 for the high end delers at the luxary street of Stockholm. So I whent with the big watch store chain in sweden that only sells watches and it was only 20 then. I liked the look and especially the watch band sollid metall link on the old one. Now both are broken.
@@Myrslokstok I understand. I can see you are sad that your two watches are broken. Then at best, try to find a more reliable watch technician to restore your watches. Hope you get your watches back in good order soon. Good luck!
Sometimes doing by yourself is better than pay at shop. I did pay for replace battery and they forgot put silicone to seal propely then you go for shower and it's foggy. Great vid! Thanks.
Incredible instructional video and didn't need any verbal instructions. Even I could do this. I have three Casio solar-powered watches so, I know what I'll be watching when it comes time to replace the batteries in these watches. Thank;k you so much!!
Wanted to change the battery for the first time. In my mind it would be pretty easy. Turn out I stuck at the unlock battery part. Found this video, the rest is no brainer.. 🙏 Thanks.
It took me a while to get the battery out, I used a number of screwdrivers and a thin knife, then it popped open from the other side as I expected. Thank you!
Awesome tutorial! If you have problems with unlocking the battery, use a regular sim card key for phones. Don't be afraid do push a little. Worked well forme
Domo arigatogozaimasu! Very detailed, clear instructional video. I couldn’t get the original O ring to fit after cleaning and greasing it, ended up ordering a new one from EBay, which took a few days, but other than that, it went well.
That’s a neat trick with the strap! I probably would have taken it off, then most likely sent a spring bar sailing through the living room and spent half an hour trying to find it. Your way is better.
Very enlightening and also really rare to find such a video on battery change. Good that someone actually thought of making it. It's really helpful. BTW, I have two questions with regard to this watch: 1) How long does the battery last in general? 2) Does it have a vibrator that vibrates when the alarm plays?
Muy bueno tu video ,aprendi algo que no sabia ....además agradezco que no le hayas puesto música...me gustaria ver como cambiar la correa ....muchas gracias....saludos desde Argentina.
I love your presentation you made it look so easy watching you do it I know I can do it I really like that it's getting the right tools let's see if Amazon has them tool kit to change battery and Casio watch let's see what comes up
Nice and easy to follow. I did not have such nice and tiny tweezers. To unlock the batterie i used a needle and for the AC reset i used a piece of wire. Hopefully the water stays out 😬. Thanks for the video.
This was done very well. I think he is a professional. It should be water tested after, but with how diligently and correctly everything was done I would be confident to take it in the water. IF you follow this 100% you shouldn't have any problems. Clean and grease the gasket and tighten opposite screws like this and it shouldn't ever leak.
Don't lose the spring guys I got lucky and found mine. Fell off wen struggleing with the battery clip I got lucky and found it lost in the towel I was working on. Second time I replaced battery. Last time was 4 yrs ago
Toughest watch in the world. Paid $49.00 brand new. Worth MORE than I paid for. Don’t think I took it off once for four years in the Marine Corps. Ate and slept with it 24/7. Girlfriend finally got on to me for NEVER taking it off .lol…Genuine Quality and I still wear one.
My 5600 factory battery just died today. ELEVEN years on the factory battery. I’m trying to decide if I should just order another 5600 or risk a battery swap.
On my first try I didn't seat the O ring back in properly. Water got in. Took it apart and let it dry for a few days. New battery. Bit more careful putting it back together. Seems fine now.
What about the spring that makes the button tone "beep" for the alarms or hour mark? Those usually pop up in the air when you take the back case off the watch. I bought and re-sold a G-shock on eBay and had to change the battery. It popped out. The customer sent it back and I got a spring from the spring bar that keeps a regular watch's strap or bracelet on. I made sure to pick a spring bar that's spring inside of it was very close to the width of the original spring that came with the G-shock. I cut it with needle nose pliers with the sharp cutting tool part near the handle. Replaced the spring. Put the back case back on and the button tone "beep" for the alarms, hourly chime, and button operation "beep" worked properly again and mailed it back to the customer. Are there not these springs on the dw5600? They will pop out of the movement when the back case is removed and fly somewhere and get lost if you're not careful. This customer is how I found out how the button tone sound of a G-shock works. I watched a video on RUclips on how to replace a lost spring and that's how I fixed the watch. I'm more careful now not to lose the original but because I was a watch dealer who bought, sometimes fixed and resold watches I had to do this a few times and I have lots of extra spring bars from sprucing up watches with new straps and bracelets. I'll also polish the watch but changing the spring in a G-shock, polishing the case, changing batteries and replacing straps and bracelets is all I know how to do. I made decent money at it until COVID-19 left half the country at home wondering how to make money before figuring out what I was doing and it became impossible to make enough money to keep doing it. It's definitely a "it takes money to make money" business.
These videos where there is no talking are no good. I needed detailed instructions on how to unlock the battery. Seeing him do it is not enough. I run into this all the time with these no talk videos. Thanks anyway.
@@JackyYBT If you want your watch to be as tough as possible, quartz is the way to go. And digital quartz is even better. No moving parts to damage or dislodge.
@@MrPleers Yup totally agreed on that, but if you hate changing battery after few years then automatic and mechanical watch is the way to go. Plus you get those smooth seconds hand.
Unfortunately, I never found out where the screw that is responsible for adjusting the accuracy of the watch is located. I can't find a video showing it anywhere. The second point is that the display module in the watch is crooked, but the author of the video apparently did not pay attention to this and did not correct it when disassembling the watch. The unevenness can be seen in the frame where the month and date are displayed. The top side of the frame is crooked in relation to the watch frame, which is clearly visible from 10:02.
Is in your watch lcd contrast is worse looking straight on dial? In my dw5600 contrast is best in small angel when I am looking from the bottom, and from left. Sorry for my English, I do my best...
The display of my watches (5600) sometimes is dim, and not clearly, but when you push one of the buttons or knock the watches it will start to show properly, first i though that battery is low but it was not reasona, could you give me recommendations?
Having the same issues. If I use the backlight it straightens the display out for about a day. Not sure what's causing it. Going to change the battery and see if that helps.
hakaihan, are you still there? Do you have any videos about replacing a G-SHOCK band? I'm struggling with re-fitting a new band to my AWG-M100 Thanks, Peter I hope you are well. Your video "How to replace Casio G-Shock battery DW-5600E" is still my favourite watch video, and I've got a lot!
hakaihan, an excellent video, thank you. I’ve never seen a anybody work so calmly and confidently and treat a watch with such care and it’s a lesson to us all I think. I can’t wait to start the battery replacement on my GB-6900BU I’m just a bit worried about releasing my battery cover. You seem to go in “sideways” to pry back one of the two prongs and it should pop open, right? Great idea about twisting the bracelet to assist access to the back of the watch, I’ve never seen that tip before. Another question do you really need to put that adhesive-backed round seal back over the battery? What is it’s purpose? Thanks again.
It is an insulator, to prevent the battery from contacting the metal plate/points. Here you have a rubber cover, which might prevent such contact, but better put on the adhesive seal, as it also keeps the battery lock secure.
@@Tube-bank You are welcome. However a small connecter needs to contact the buzzer which is attached to the back covers plate, and a small cutout for that is provided. If this contact is not made, the buzzer won't beep.
Great video. However, if your watch is otherwise in great condition, I would order the o-ring before changing. Twice, despite treating carefully, the old one was too stretched to fit well into groove.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Sir you make this video 6 year ago but people watch today and tomorrow.. Your video help a lot for us thank you so much ❤️
Best video for sure. I just changed my DW5600e using this video as a guide. Only tricky part for me was unlocking the battery... maybe I was being too gentle...but I got it eventually. $1 Duracell and a $7 thing of silicone grease and I'm good. The BEST watch in the world to me I'd back in order!
I've worn the same watch since my basic training decades ago. My watch repair shop closed this past year (coronavirus) so I had to learn how to it on my own.
Toughest watch in the world to me. I never take it off...fresh and salt water, fishing, banging into stuff, mud races, painting (and paint thinner!) And blood, guts, grease, and anything else I get into... this watch shines.
Which one is yours battery or solar version? I m planning to buy one. Is it reasonable to pay more for solar version? Pliz help
@staypositive301 battery version is mine. Always stayed with what worked from basic training in the 80s. Can't say anything about solar...never had it. Good luck, great watch!
@@Motorcyclewindtherapy o yeah! Sounds battery version too capable. How long a battery change lasted?
@staypositive301 I seem to get about 10 years out of a battery. About the only time I take the watch off, lol.
@@Motorcyclewindtherapy oh. Some youtuber mislead it last for only 2-3 yrs depending upon usage. But if this watch uses CR 2016 battery then it should atleast last 7yrs on more... I ll opt for battery version bro!
September 2021 - This wordless detailed filled very clear DIY video is outstanding. I especially like the way they wrapped the strap back. Awesome!
i just watched a video where you couldn't see the work being done because the straps were blocking the view... i was like, why would you even post a video like that? then i found this video -- the strap flip is genius!
Great video. I just replaced my battery thanks to you! Appreciate it very much. You’re very meticulous, I love it. No talking, just your mysterious black gloves and subtitles 👍🏽🙌🏽
How much year you battery last?
@@investmentgeek21Supposed to last something like 7 years, but depends on how new it is when you buy it, and how often you use the lamp.
Great video! It felt hard to find a trusted place to get the battery changed so I was tempted to do it myself but was worried to damage the watch. With this video it made me feel very confident. I was able to change it now in 15 minutes. I skipped the o-ring refurbishment as I do not have the product. I used a needle to unlock the battery and it went well. For the small coil I was careful and it stayed well in place. For the AC reset, I used an old copper wire and could have used a paper clip. I noticed my battery was low because the backlight no longer worked and the digits fading. It now works like a charm. Thank you!
Has it remained waterproof?
@@faraaz1541 I did not put my watch purposefully in the water since but have used it normally and it works fine. Of course, if you can refurbish the o-ring it will be better.
The O ring has to be replaced , it stretches under pressure from screwing down the back plate , and will render the watch not being water proof , just wearing it in the shower will be enough to cause water ingress. I speak from experience.
This is the best video that I've found, really good camera work close up. I feel confident now working on my G-Shock. This person's a pro who's probably done dozens of these. Thank you for helping.
This guy has a very particular set of skills; skills that he has acquired over a very long career, skills that require those gloves.
Des Jon lol first thing i thought
Those rubber gloves would have saved one of my Casio Marine Gear MRT200 when I attempted to change its two batteries. At a giving moment while handling and trying to fit the batteries in their slots I felt a tingling on my finger and I thought it could have been a electric discharge. My LCD display was never the same again. It is unstable, blinks, the numbers disappears and appears when changing functions and the batteries do not last a week. Be careful not to short yours! I did not believe I would!
Would you trust to dive your watch 3-4 meter under water after having changed the battery yourself ? .....just make a try please....
@@joaovianna7321 an* electric and these commenters don't know anything about its reason.
@@markhamilton3215 Yes or even more they a gasket that keeps the water put stupid.
I just replaced the battery on mine DW-5600E yesterday after 10 years obviously, I cleaned and applied the silicone grease on the gasket the watch is running like new ready for at least 5 + years on an energizer 2016 battery awesome video.
@Be CarefulMine lasted 10 years but I didn't use the alarm or the el backlight at all, but I'm sure it will last way more than 2 years.
Awesome tutorial. Only thing I'd add is be very careful of the alarm spring. You can see it clearly at 07:21. Controls all the sounds the watch makes.
It can fall out, and good luck finding it 😁
So if I take that spring out, there is no chance to make any noise from the watch? If so, I'll be taking it out for when I'm on set.
If you take that out the watch doesn’t be able to make any sound no more, until you put that little spring back in its position in the module. If you lose that you can extract a new one from a spring bar for watches’ metal bracelets. Just cut one of the two extremities of the spring bar and collect the spring from its own inside. Than place it on the module of your Casio et voilà, les jeux sont fait: you have your Casio that can make every sound again
The whole procedure it's a little bit overkill but putting the strap that way in order to make the back plate easier to remove is a very good idea.
This guy wanted to be a heart doctor
He's the assistant cook on the night shift over at Denny's
I learned what I needed to know / thanks for posting this
I think I'll just take my watch to my local watch repairman when I need a battery replacement. I'd be afraid of damaging my watch. But it was still cool to see exactly how the battery replacement is like. Thumbs up on the video!
I have 2 places near my place of work that have very competent watch repairmen. I've had G-Shocks repaired by them and they've been awesome. But I'll definitely keep your advice in mind if I have to get my watches repaired somewhere else.
And I will try to extend the battery life so that it outlives the watch. Use the light sparingly, and don't use alarms often. FYI, my first G-Shock battery is in its 7th year. Only the light does not function.
Pay someone to take out 4 screws
@link2derek I have a very old Casio and a fairly new Casio (not G-Shocks) - both also require resetting of the AC.
Man I see your comments on so many G square videos😂
Very nice touch flipping the band over to help remove the caseback. Thank you!
Thanks a lot. I got really puzzled when trying to remove the old battery, and your video saved me!
This guy is a professional who does it so skilfully, diligently, even cleaning the back case, rubber gasket and reapplying silicone.
If you go to a watch repair shop to replace the battery, do you think he will bother to other than simply replacing the battery and screwing the case back in place? I wish he would, but I know he wouldn't.
James S
Well two watches (different places) off mine they overscrewed the screws so they broke.
@@Myrslokstok I am sorry to hear that. By my experience, it's best to replace the battery of the watch at its authorised service centre. Only they will clean the internals and reapply silicone for waterproofing. It will cost a lot more, but it is the only way to retain the integrity and well-being of the watch.
James S
Yes offcourse but there are no such in Sweeden for Bulova. Considering the ceep price like $250 on sale, it was not worth the $80 for the high end delers at the luxary street of Stockholm.
So I whent with the big watch store chain in sweden that only sells watches and it was only 20 then.
I liked the look and especially the watch band sollid metall link on the old one. Now both are broken.
@@Myrslokstok I understand. I can see you are sad that your two watches are broken. Then at best, try to find a more reliable watch technician to restore your watches. Hope you get your watches back in good order soon. Good luck!
Sometimes doing by yourself is better than pay at shop. I did pay for replace battery and they forgot put silicone to seal propely then you go for shower and it's foggy. Great vid! Thanks.
Incredible instructional video and didn't need any verbal instructions. Even I could do this. I have three Casio solar-powered watches so, I know what I'll be watching when it comes time to replace the batteries in these watches. Thank;k you so much!!
Casio G-shock is the best tool watch that you can get without a doubt!
Wanted to change the battery for the first time. In my mind it would be pretty easy. Turn out I stuck at the unlock battery part. Found this video, the rest is no brainer.. 🙏 Thanks.
How many years your battery last?
It took me a while to get the battery out, I used a number of screwdrivers and a thin knife, then it popped open from the other side as I expected. Thank you!
Very good video. and cool how you twist the wristband to keep it out of the way
Сразу видно - профессионал! Даже без слов все понятно. Не то что наши- половину видео руками камеру закрывают))
Отличная и полнейшая инструкция! Автор супер молодец
Чем он кольцо уплотнительное смазал на 6:30 ???
@@ТунецМорсков смазывает херово - порвать так можно!
Awesome tutorial! If you have problems with unlocking the battery, use a regular sim card key for phones. Don't be afraid do push a little. Worked well forme
Domo arigatogozaimasu! Very detailed, clear instructional video. I couldn’t get the original O ring to fit after cleaning and greasing it, ended up ordering a new one from EBay, which took a few days, but other than that, it went well.
Very good tutorial!! High attention to detail, love it!!
That’s a neat trick with the strap! I probably would have taken it off, then most likely sent a spring bar sailing through the living room and spent half an hour trying to find it. Your way is better.
Clear as a bell - Your slow & methodical technique made it easy to see how to get the job done, properly. THANK YOU !
Perfect tutorial! Battery installed without a hitch. Thanks!
thanks man, I changed my battery thanks to your video :)
Great video.. I just changed mine by referring your tutorial.. Using limited tools n experience, but it works.. Thanks..
This looks very tricky .. Just going to pay the extra money and take my much loved Casio G-Shock to a watch shop.
But thank you for this video.
Brother do we need to change the cell of the solar G shock watch also ?
Great video. With those gloves and skill, he could probably disarm a bomb too.
2:50 was struggling to unlock. Thanks. Need a tiny pin or fine tip tweezer. What is the reason to connect AC to (-)? It has mentioned in the sticker
great tutorial Ive jus changed my watch battery
Thanks. Very helpful. Question: What's the use of the seal? The rubber keep the battery from the metal cover already.
Very enlightening and also really rare to find such a video on battery change. Good that someone actually thought of making it. It's really helpful. BTW, I have two questions with regard to this watch:
1) How long does the battery last in general?
2) Does it have a vibrator that vibrates when the alarm plays?
1) 5 to 10 years depending on how often you use the alarm function and the backlight.
2) DW 5600 series don't have vibration alarm.
@@LeChristEstRoi: OK, thanks.
3:47 satisfying sound.
Muy bueno tu video ,aprendi algo que no sabia ....además agradezco que no le hayas puesto música...me gustaria ver como cambiar la correa ....muchas gracias....saludos desde Argentina.
I love your presentation you made it look so easy watching you do it I know I can do it I really like that it's getting the right tools let's see if Amazon has them tool kit to change battery and Casio watch let's see what comes up
Thank You! Battery replacement is easy thanks to you.
Nice and easy to follow. I did not have such nice and tiny tweezers. To unlock the batterie i used a needle and for the AC reset i used a piece of wire. Hopefully the water stays out 😬. Thanks for the video.
You can get even one of those for nail cosmetics. Its very fine and way cheaper than professional watchmaking tools.
Just did the replacement. Just as easy as the video shows. Thanks again
Good video for sure ! Reminds me of the Guinness ad when the tweezers end in the table!
This was done very well. I think he is a professional. It should be water tested after, but with how diligently and correctly everything was done I would be confident to take it in the water. IF you follow this 100% you shouldn't have any problems. Clean and grease the gasket and tighten opposite screws like this and it shouldn't ever leak.
Thank you very much for being so straightforward
Hello, nice video. Do you need a conductive tweezer to reset this watch?
Don't lose the spring guys I got lucky and found mine. Fell off wen struggleing with the battery clip I got lucky and found it lost in the towel I was working on.
Second time I replaced battery. Last time was 4 yrs ago
I love the way he snap the tweezer onto the wooden table at the end of the clip.. What a stylish ending..
I just care about replacing the battery without exploding with rage personally.
Nice work, professionally done.
Well done a nice clean careful battery change over 👍
I changed the batteries of some of the watches in my house, it was so satisfying and a little challenging
Toughest watch in the world. Paid $49.00 brand new. Worth MORE than I paid for. Don’t think I took it off once for four years in the Marine Corps. Ate and slept with it 24/7. Girlfriend finally got on to me for NEVER taking it off .lol…Genuine Quality and I still wear one.
thanks for sharing
What does the sticker do? wondering if it's ok not to stick it back
Just replaced mine thank you for the great video 👍
Gracias por el video es un gran apoyo saludos desde México 🤠👍👏 migo
Why do I feel like the guy is also a professional assassin in his spare time.
A true professional at work. I doubt I could trust a jeweller to take such care to preserve water resistance.
It's actually harder than I thought it would be.
Getting one of those 10-Year Battery models now.
My 5600 factory battery just died today. ELEVEN years on the factory battery. I’m trying to decide if I should just order another 5600 or risk a battery swap.
Beautifully and Professionally done !
Man, thank You a lot :-) Just successfully changed battery in my DW 5600 BB. Works perfect. Never done that before to any watch.
very nice!!! thank you for making this video! Greetings from Brazil!
Helped a lot. thanks
Im am so that u tube is the best info. Of all time .
Any issues with water after changing the battery? Solid video and enjoyed watching the process!
On my first try I didn't seat the O ring back in properly. Water got in. Took it apart and let it dry for a few days. New battery. Bit more careful putting it back together. Seems fine now.
is it necessary to clean the o-ring and groove?
What about the spring that makes the button tone "beep" for the alarms or hour mark? Those usually pop up in the air when you take the back case off the watch. I bought and re-sold a G-shock on eBay and had to change the battery. It popped out. The customer sent it back and I got a spring from the spring bar that keeps a regular watch's strap or bracelet on. I made sure to pick a spring bar that's spring inside of it was very close to the width of the original spring that came with the G-shock. I cut it with needle nose pliers with the sharp cutting tool part near the handle. Replaced the spring. Put the back case back on and the button tone "beep" for the alarms, hourly chime, and button operation "beep" worked properly again and mailed it back to the customer. Are there not these springs on the dw5600? They will pop out of the movement when the back case is removed and fly somewhere and get lost if you're not careful. This customer is how I found out how the button tone sound of a G-shock works. I watched a video on RUclips on how to replace a lost spring and that's how I fixed the watch. I'm more careful now not to lose the original but because I was a watch dealer who bought, sometimes fixed and resold watches I had to do this a few times and I have lots of extra spring bars from sprucing up watches with new straps and bracelets. I'll also polish the watch but changing the spring in a G-shock, polishing the case, changing batteries and replacing straps and bracelets is all I know how to do. I made decent money at it until COVID-19 left half the country at home wondering how to make money before figuring out what I was doing and it became impossible to make enough money to keep doing it. It's definitely a "it takes money to make money" business.
Wow, watched the whole video. Like an expert, great job and thank you!
Very nice and detailed. What you used to clean O ring?
I thought it was simpler. Very useful video, thanks
Hi, thanks for your video, what is the size for the o'ring?
Awesome skill set. very precise and neat. I can tell you've done this once or twice.
LOL
Thanks for sharing
These videos where there is no talking are no good. I needed detailed instructions on how to unlock the battery. Seeing him do it is not enough. I run into this all the time with these no talk videos. Thanks anyway.
What would make the LIGHT stop working? Replaced the battery thinking it might fix it but no luck
Very nice and professional work. I use also the Kluberpaste (seal paste for screws).
where i can buy kluberpaste ?
Blue locktight could do the job ?
Very loud music
That thing is soooo over-engineered. I love it
What did he use to lubricate the O-ring at 6:30 ???
This video is a very good reason to get the 5610 and leave the battery to the sun for maintenance.
This felt tense, like I was watching someone perform a life saving operation😂
Is it necessary to reset if the watch works fine after inserting a new battery?
4:50 are there new adhesive seals available or do you have to always reuse the original?
It is what it is
Can i use copper wire to contact ac + if i dont have tweezers?
Отличная инструкция. Спасибо!
I think I should stick with the tough solar model.
You'll still need to change the battery in 10 years
Those solar batteries won't last forever and needs to be replaced as well at some point.
Get an automatic watch instead
@@JackyYBT If you want your watch to be as tough as possible, quartz is the way to go. And digital quartz is even better. No moving parts to damage or dislodge.
@@MrPleers Yup totally agreed on that, but if you hate changing battery after few years then automatic and mechanical watch is the way to go. Plus you get those smooth seconds hand.
Unfortunately, I never found out where the screw that is responsible for adjusting the accuracy of the watch is located. I can't find a video showing it anywhere. The second point is that the display module in the watch is crooked, but the author of the video apparently did not pay attention to this and did not correct it when disassembling the watch. The unevenness can be seen in the frame where the month and date are displayed. The top side of the frame is crooked in relation to the watch frame, which is clearly visible from 10:02.
here's a link to how to adjust the accuracy. it works. drive.google.com/file/d/1H8c6if8f0PsI_z-PLd4x7ayniqTPHOHq/view?usp=sharing
what screwdriver is this? the precision drivers i have wont turn any of them
Is in your watch lcd contrast is worse looking straight on dial? In my dw5600 contrast is best in small angel when I am looking from the bottom, and from left. Sorry for my English, I do my best...
Yup, same with me
Same with me too.
Hakai, what mm is the screwdriver? 1.2mm/1.4mm/1.6mm? And thank you for your video.
Спасибо из России!
Thanks frome Russia, bro!
The display of my watches (5600) sometimes is dim, and not clearly, but when you push one of the buttons or knock the watches it will start to show properly, first i though that battery is low but it was not reasona, could you give me recommendations?
Having the same issues. If I use the backlight it straightens the display out for about a day. Not sure what's causing it. Going to change the battery and see if that helps.
hakaihan, are you still there?
Do you have any videos about replacing a G-SHOCK band?
I'm struggling with re-fitting a new band to my AWG-M100
Thanks, Peter
I hope you are well. Your video "How to replace Casio G-Shock battery DW-5600E" is still my favourite watch video, and I've got a lot!
hakaihan, an excellent video, thank you.
I’ve never seen a anybody work so calmly and confidently and treat a watch with such care and it’s a lesson to us all I think.
I can’t wait to start the battery replacement on my GB-6900BU
I’m just a bit worried about releasing my battery cover.
You seem to go in “sideways” to pry back one of the two prongs and it should pop open, right?
Great idea about twisting the bracelet to assist access to the back of the watch, I’ve never seen that tip before.
Another question do you really need to put that adhesive-backed round seal back over the battery? What is it’s purpose?
Thanks again.
It is an insulator, to prevent the battery from contacting the metal plate/points. Here you have a rubber cover, which might prevent such contact, but better put on the adhesive seal, as it also keeps the battery lock secure.
hakaihan, thanks very much for that explanation. Now I know and won’t forget. Thanks. Peter
hakaihan, I meant to ask you before. What make and model number are those curved tweezers you were using? I would like to get a pair. Thanks, Peter
@@Crazytesseract CT I'm not sure if I acknowledged your helpful explanation. Appreciated thanks. Peter
@@Tube-bank You are welcome. However a small connecter needs to contact the buzzer which is attached to the back covers plate, and a small cutout for that is provided. If this contact is not made, the buzzer won't beep.
Great video! Do you know if changing the battery affects the water resistance?
May be a little.
Make sure the seal is cleaned and then lubricated. If you do that then it will still be water resistant.
add blue locktight paste on the 4x screws threads before installed them back , it will help a LOTS
Tel1roc I usually put oil in the inside where the rubber seal hoes in since you tightened the screw it will be water tight once again
*Can you please tell what type of screwdriver is this and how it could cost?*
O RINGS ARE STANDARD SIZE FOR ROUND SHAPE G SHOCKS ?? OR DIFFERENT SIZES ?
excellent video, but I have a question: why is important to reset the watch? Thank you!
Great video. However, if your watch is otherwise in great condition, I would order the o-ring before changing. Twice, despite treating carefully, the old one was too stretched to fit well into groove.
Great!
Just curious if my local watch shop do usually all the same like in the video, silicon grease etc. Or they just change the battery :-)
Cheers
thanks brother from borneo👍👍👍👍
I polished my case back as well.