@NOTORIOUS_J_RC Same here, I need a healthier battery I think for mine. I've got tons of Kv, but the battery I've been using seems less potent every time I run it lately.
@@Rek_Rc Mine's currently using only a 3800kv, but I managed to plug 6s into it. lot's pf possibilities and I'll be following along to see your progress.
Subbed, nice job man. Did you have to mod the motor mount to get 18t pinion in, I found the largest pinion I could get in was a 15t & that was slightly tight.
The 20t was all I could get in mine, id imagine the 21 isn't too much bigger. It's as far as it can go and it's right up on it, my arrma vorteks has the exact same chassis, it literally can't go any further, I do worry about hearing issues with the motor being all the way against the plastic, but plenty of air flowing thru with the 40mm fan, but yeah the 20 is as far as shell go with a correct mesh. Quick question, do the felony hoons hook well? I bought some proline street tires and it was an awful mistake( I'm a rookie) I could barely turn the tires were so bad, might as well keep the arma vortek front tires on and put some slicks on the back but I'm struggling to find a good wide tire that doesn't ballon
I was using a Hobbywing 3660 3200kv motor with a 5mm shaft. The game changer is using spur gears from the Infraction 3s so you can decrease the tooth count on the spur and increase the tooth count on the motor.
Dude that’s so awesome 🚀🚀I think this rig turned out to be more then anyone expected 💪🏻👊🏻great video 😎
It's remarkably strong Joe. The design of the drivetrain is almost bulletproof. The spur is the weak link, and it's given me no issues so far
Awesome video!!! World’s Fastest Gorgon!!!
Don't know for sure, but I'm sure this milestone will only last a few days✌️
Nice! I'll have to claim the second fastest now. Well done!
Thanks@@Rek_Rc, but I'm still hoping for just a bit more out of this crazy little truck.
@NOTORIOUS_J_RC Same here, I need a healthier battery I think for mine. I've got tons of Kv, but the battery I've been using seems less potent every time I run it lately.
@@Rek_Rc Mine's currently using only a 3800kv, but I managed to plug 6s into it. lot's pf possibilities and I'll be following along to see your progress.
Impressive! Nice run.
that joker is a beast!
Great run baddy 🎉🎉🎉 Let's go 😂
That’s the guy we know and love! Legend status.
I think I've seen you on the Arrma forum, bro. Cool stuff. Sub!
Thanks. Yeah, I've been a regular there for about 5 years. Great Forum all around
Cool video. nice truck. new subscriber.
Thanks!
AWESOME MATE.!!! 👍 👍 👍 👍
🙏
It's only taken 10 months but I've finally gotten my hands on one, they're out of stock so fast in the UK.!
SupercalifragilistickExpialidocious😈
You Smashed ‘Em all in 1 session Notorious J🤭✊🏿💯
Nice one bro! Will have to upgrade mine too at some point 🥸
🙏
Subbed, nice job man. Did you have to mod the motor mount to get 18t pinion in, I found the largest pinion I could get in was a 15t & that was slightly tight.
Actually, I managed to get a 21t in. Just pushed the motor all the way to the front and the mesh was perfect.
The 20t was all I could get in mine, id imagine the 21 isn't too much bigger. It's as far as it can go and it's right up on it, my arrma vorteks has the exact same chassis, it literally can't go any further, I do worry about hearing issues with the motor being all the way against the plastic, but plenty of air flowing thru with the 40mm fan, but yeah the 20 is as far as shell go with a correct mesh. Quick question, do the felony hoons hook well? I bought some proline street tires and it was an awful mistake( I'm a rookie) I could barely turn the tires were so bad, might as well keep the arma vortek front tires on and put some slicks on the back but I'm struggling to find a good wide tire that doesn't ballon
Hello what size on the motor and the shaft do I need to have? Thinking of buying this and make it brushless
I was using a Hobbywing 3660 3200kv motor with a 5mm shaft. The game changer is using spur gears from the Infraction 3s so you can decrease the tooth count on the spur and increase the tooth count on the motor.
I want to buy this Arrma Gorgon model in black. Are they sold out? In Spain nobody has it. I want to get it.
Definitely fast for a Gorgon. You got put some time and a little money to make it do 75mph very impressive
Sheeed 76 one way thats awesome
@Greentyphon I got it over 80 eventually but never posted a video. It's back to being a regular monster truck now
The suspense !! We always need a damage report !!!??
Top of the front tower cracked. It's a separate piece from the chassis. Made a small aluminum bracket as a temporary fix
What motor and esc did u use
Castle MMX8S and a cheap 3800kv motor. Got it to 80, but it just kept blowing over after that.
Lol ! It's weird... the best rc I have, and all the money i spent, the best one I like the most is my arrma gorgon... ❤
So do I!!
76mph !!! And I'm sure I can hear your clutch slipping ! It'll go more !
Trying not to tighten that slipper too much, but might have to if I want to reach it's full potential
BADASS J
so if its 1/16 scale is it 2000 mph ?😅
It's actually 1/10 scale and those are actual mph off a gps. Power to weight is the key here.
👍
It looks like it rides like a Cadillac.😂😂
What the? Nice job!
Have mine on 3s 3900kv, but not for speed runs....just more wheelie action😊
Mine is back to 3s now too, and just a fun little basher.
How good is holding up the gool RC motor ? Is worth the extra money of the hobbywing motor ?