Jeep Cherokee - XJ Hood Spacers for Heat Soak

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • Installing Hood spacers to fix Heat Soak on my 1998 Jeep Cherokee XJ
    #jeepcherokee #jeepxj #budgetbuild
    Amazon Affiliate Link to Spacer kit used
    amzn.to/4cBXfhb
    Links to the Gear!!
    **As an Amazon Affiliate I will get a small commission on any sale made from this***
    Fridge amzn.to/3zewSPS
    Jackery1000 amzn.to/3VSNjtW
    Jackery500 amzn.to/3L09Tuk
    Transfer Case Linkage Kit amzn.to/3VRrriM
    ARB 10000011 Speedy Seal 2 - Universal Heavy Duty Tire Repair Kit amzn.to/3KVYoEr
    Steering Box amzn.to/3XBzMZg
    Dorman 00067 Battery Tray Replacement amzn.to/4bi6t0V
    Dorman 00593 Battery Hold Down Replacement amzn.to/4ezgMk0
    Jeep Cherokee XJ Snorkel Kit amzn.to/3KRBP3P
    Front Driver Side Window Regulator with Motor amzn.to/3zdoHn7
    Rear Hatch Liftgate Rubber Weatherstrip Seal amzn.to/4b9KjxO
    Spectra Premium CU1193 Radiator amzn.to/3VRzdJr
    Rough Country Control Arm Drop/Relocation Kit amzn.to/4cc2sfO
    Rough Country Heavy Duty Tie Rod amzn.to/3KVx9K1
    Lumitek 20" 126W CREE Led Light Bar Flood Spot Combo amzn.to/4cwvCWJ
    Metra 70-1817 Radio Wiring Harness amzn.to/3RH24Oe
    Rough Country Stainless Brake Lines amzn.to/3RCZ6Kq
    Rear Bar Pin Flag Nut (Cherokee XJ) amzn.to/4bhWokq
    Rough Country N3 Steering Stabilizer amzn.to/4balIZT
    ECCPP 4X 1.25 inch 5 lug Wheel Adapters Hubcentric 5x4.5 to 5x5 Wheel Spacer Adapter Fits for Wrangler JK RIMS on A TJ OR YJ 2002-2013 for Liberty wheel adapters amzn.to/3RGl4w5
    Rough Country 6.5" X-Series Lift Kit amzn.to/3RFcy0e
    ECCPP 2pcs Rear Liftgate Lift Supports Struts amzn.to/45ytRWJ
    Bosch Automotive 13138 Premium OE Fitment Oxygen Sensor amzn.to/3VSOIAI
    Catalytic Converter Compatible with 1996-2000 Jeep Cherokee 2.5L/4.0L | 1996-1998 Grand Cherokee 4.0L/5.2L | 1998 Grand Cherokee 5.9L Direct-Fit (EPA Compliant) amzn.to/4cPR2yn
    SWITCHDOCTOR Window Master Switch for 1997-2001 Jeep Cherokee amzn.to/4c9SDih
    Engine Cylinder Valve Cover Gasket amzn.to/4c908pZ
    Coleman Classic 1-Burner Backpacking Stove amzn.to/3KTX8S3
    Lodge 6-1/2 Inch Cast Iron Pre-Seasoned Skillet amzn.to/3KVcnKD
    Camping Lantern, LED Lamp amzn.to/3RE46Pc
    Outdoor Camping Lantern Hook amzn.to/3zmC1oV
    Thermacell Mosquito Backpacker Repeller amzn.to/4bjWnfU
    Water Container with Spigot, 4 Gallon amzn.to/3xCgd8j
    Portable Camping Fan, Small Tent Fan amzn.to/3RCPTSt
    Bear Spray amzn.to/3zmCJ5z
    Arcturus Military Wool Blanket amzn.to/3RH30Ce
    Weanas Tarp Poles Adjustable amzn.to/3xhDPPK
    Gold Armour Rainfly Tarp amzn.to/3XzE7Mz
    Overmont 9QT Camp Dutch Oven amzn.to/3Xw0a6...
    Season Fleece Sleeping Bag Liner Adds Up to 27°F amzn.to/4cxtjm9
    Camping Cookware Mess Kit amzn.to/3zh58tZ
    Coleman Outdoor Compact Folding Table amzn.to/4cuyqnc
    MalloMe Camping Cookware amzn.to/3REW7Bh
    Universal Car Windshield Washer Pump, Washer Fluid Reservoir amzn.to/3xwgoCe
    EVOR 5KW Diesel Heater amzn.to/3XBqht8
    Hood Spacer kit amzn.to/4cBXfhb

Комментарии • 23

  • @dantheman6931
    @dantheman6931 2 месяца назад +4

    In search of a cowl hood myself. Just a tip, use a marker around the brackets on the hood before taking the bolts out. Then you can get the hood spacers in the right place and prevent having to realign.

  • @05glisedan
    @05glisedan 2 месяца назад

    On our daily, I've considered doing the same mod.
    Many have warned, if you get into a head on collision or weird accident, hood me shear off and go through windshield, potentially hit driver.
    For trail only rig, seens like an eaay mod.
    Looking forward to next episode.

    • @chineseempanada420
      @chineseempanada420 2 месяца назад

      Seems more likely that the hood latch will break and flip the hood up before it shears the latches and sends the hood into you

  • @MajorWeakness
    @MajorWeakness 2 месяца назад +1

    I have found that when your fuel pump gets age on it.The check valve goes bad and therefore more fuel goes back into the tank and easier to vaporize.When hot so by putting a new fuel pump with a new checkvalve then it likely will not happen as

  • @ridgewood2771
    @ridgewood2771 21 час назад

    A return fuel system will fix your heat soak problems

    • @nextweeksadventure
      @nextweeksadventure  21 час назад +1

      @@ridgewood2771 That is my plan. I found a company who is trying to make up a complete kit. Untill then this "fix" has actually worked better than expected. But I still don't like the look🤣🤷‍♂️

  • @GF_Burke
    @GF_Burke 2 месяца назад

    I have the same color jeep, same front bumper, 3in lift, 33in BFGs. I have aluminum spacers that the PO did, I just left them, look fine. But I think my spacers are not that thick... little thinner. (I'm not sure I need them at all... never tested without).

  • @gero195
    @gero195 2 месяца назад

    Intake holes let header heat come right up boils gas new horse shoe style has blanket i wrapped everything with dei tape added hood vents no more heat soak and only with chevron gas is when i get heat soak now.

  • @danhambrick6331
    @danhambrick6331 2 месяца назад +1

    I gotta ask,how did you get the black eye?😁😁

    • @nextweeksadventure
      @nextweeksadventure  2 месяца назад +1

      1st day back from vacation I was putting a box up on a shelf at work and a plastic tote slid off the top of it caught me right in the face.

  • @EJSCRAZY93
    @EJSCRAZY93 2 месяца назад

    Fixed my heat soak with a new bilet fuel rail from amazon its like 120 bucks and 4 hole injectors from KSuspension . Should do the trick

    • @bootloopgaming8642
      @bootloopgaming8642 Месяц назад

      link?

    • @BUKWulfSh0t
      @BUKWulfSh0t 28 дней назад

      I reccomend 4hole fuel injectors and pigtails from Ksuspension... they're legit!

  • @brentdutcher2875
    @brentdutcher2875 2 месяца назад

    I haven't watched the whole video yet but have you tried a aluminum fuel rail ? I haven't ever had a problem with heat soak.

    • @nextweeksadventure
      @nextweeksadventure  2 месяца назад +1

      I talked to someone who Is putting a kit together to sell. It has a new fuel pump, regulator, fuel rail and is setup to have a return line back to tank like all modern vehicles. So I'm waiting for him to get the kits out for sale before I go purchasing any parts.

    • @christopherpilcher6347
      @christopherpilcher6347 2 месяца назад

      Any info on who It is that's going to be selling those kits?

    • @nextweeksadventure
      @nextweeksadventure  2 месяца назад

      @@christopherpilcher6347 boostwerksengineering

    • @BUKWulfSh0t
      @BUKWulfSh0t 28 дней назад

      ​@@nextweeksadventure is that his RUclips channel? Or other social media accounts?

    • @nextweeksadventure
      @nextweeksadventure  28 дней назад +1

      @@BUKWulfSh0t website

  • @theangrycamper
    @theangrycamper 2 месяца назад

    would hood vents not help?

    • @nextweeksadventure
      @nextweeksadventure  2 месяца назад +1

      Any vent in the hood should help remove heat from the engine bay. I'm more interested in taking a stock hood and making a cowl for it but time is my problem right now. So this is just to help till I can make a hood.

    • @theangrycamper
      @theangrycamper 2 месяца назад

      @@nextweeksadventure I just cut my hood up and added the Hyline offroad XJ vents, they are pretty cool but I think adding an AC vent under there is better ha ha ha ha ha ha ha