Just eyeballing this it looks like you can swap the "inflation charge" from one steering wheel to the other. They are held on by four bolts. Take the single stage inflator off the old steering wheel and bolt it on the new steering wheel in place of the new two stage inflator. I haven't done this, but if you measure the bolt pattern and it's the same. it seems to be an easy solution for keeping your airbag operational.
For anyone wondering about the airbag. The new airbag has a dual charge. A primary and a secondary. This is because newer collision detection systems have the ability to detect the severity of an impact and fire the higher or lower airbag charge. You can connect the airbag but it will take some research to decide which charge you prefer to have operational and how you want to go about connecting the wiring. Just do your research and be careful
I feel the same about the cruise, with gears and 35s it's still a lot to ask for it to handle. Ironically cruise was on my short list when looking at jeep and I probably turned away a few better options that didn't have it... Personally I love the feel of the factory wheel and mine somehow has not falled to pieces yet. I would recommend talking to Project Dan H he is super friendly youtuber you've probably seen his vids. He likes upgrading steering wheels and knows a lot about how to make different models play nice.
I actually found your video trying to go trhough options to modernize my XJ. It is a 98 2 door model and honestly, I just want to keep the body and the parts I cant replace by any means like the dash and door panels. I think new wrangler seats can be adapted into the XJ (at least the front ones) and some other things. For the steering wheel, replacing the buttons for other functions sounds amazing, not sure what functionality would be best for most people, but Audio controls are super popular for this location, so it could be a good bet if possible.
You know what man, I looked an xj a couple months ago and this guy did this steering wheel mod and I asked him about the airbag light and he said no light. And I thought that meant he got it working. It didn’t even look occur to me that he just pulled the bulb. That sneaky bastard haha. Good thing I didn’t buy it. Who knows what else he lied about.
Just a thought about the airbag, why not just cut the wire end off both air bag harness's and switch them out? IF your new wheel didn't come with the pigtail for the air bag, you might have to hunt one down. Hope this helps. New wheel looks great!
I thought about doing that but the old airbag just has 1 pigtail connection and the new one has 2. Not sure which one to hook up and definitely afraid to hook up wrong and blow the bag. I always worry when out wheeling about setting it off on a trail so now thats no longer a issue. Thanks!
I was told that connecting the 2 stage airbag in parallel to the existing ACM wire will get the airbag light off. That was from a vendor in Etsy. Airbag plugs can be purchased from ebay brand new. That is where I got mine from.
All the mods are cool, I get it, but only if you never intend to sell it. If you ever try to sell a modded XJ you'll never get back the money that you put into in but I guess that's true of any modified vehicle. My XJ is bone stock, maybe someday I'll have enough money for a 2nd XJ that I can lift and modify, that way I'll have the best of both worlds. The only mod that I really want to do is the airbag delete. I just don't trust a 25 year old air bag. For that reason I thank you for posting this informative video.
Non car people are the ones who won't pay for a modified vehicle. They don't understand. As for mine it's not going anywhere. That jeep was the inspiration for this channel. I couldn't do that to it. Thanks for watching!
FYI, NEVER adjust the centering of the steering wheel by moving it a spline or two one way or another. Make sure it's exactly where the previous wheel was. The clock spring is designed to only turn each way a certain amount and you will ruin it if you adjust your steering wheel to center it. Center your wheel properly by adjusting the steering components during an alignment.
when you bolted down the wheel and drove it did you feel the wheel had a little resistance? i think the wheel needs a little relief in the back casting for the wire trough that supports the ab, cruise and horn wires, i believe the clockspring is binding, and slap a 2.7 ohm resister between so no illumination...
Wheel feels just like the old one. Only wire is the horn and its fine. Airbag and cruise wont hookup because airbag is a gen 2 style with different connections and system that runs it. Guy on etsy sells a kit to make cruise work but I'm not a fan of cruise so not doing it. As for the light eventually I'll pull the bulb out. Inspections are a thing of the past it's registered historic now so nobody will fail it for something so I'm not worried. The moaning from wheel has been doing it since I bought it shes old.
I've got everything working with his mod and airbag as well, I will have to make a relief for the lower plastic portion that butt's up to wheel from clockspring. Just curious if you felt the same it's pushing the spool into clockspring g Housing
@@richardtugwell6229 I've never noticed anything out of the ordinary after doing the swap. When I installed it I went kinda heavy on the nut that holds it down so mine sits as far down as possible. Feels like the old wheel.
I would like to but the cruise control switches off of you 98 steering wheel.. I have a 98 but eh switches the last owner put in were a later model where they changes the amp signals after 98 so mine doesn't work
I mean i bought a jeep grand cherokee 2014 steering wheel (looks the same as this one,jeep wrangler jk etc) BUT IT DOESN'T fit it has a bigger hole 😢😢😢😢 Is there anything i could do ? Thank you for your time
@@nextweeksadventure i just saw one of your comments saying just that ...buy compass 2011-2017 not grand or wrangler they look similar but they are not the same....i found out the hard way 😔
Hello, I really like your idea. I have a Jeep Wj and I'm wondering if I can replace the steering wheel from the Compass to my Wj. I saw the steering wheel swap from Wj to Xj. What do you think ? Regards
I've seen people put grand cherokee steering wheels in xj's before. So I would assume this wheel would work in it but I can't commit to saying 100% it will.
Not 100% sure but I dont believe this will work on your year. I can't find the notes on wheel hub sizes across years and models along with the wheel itself. They had several different models with different size bores.
What's hilarious is that Jeep airbags are Known to not work. I have been in one that rolled on the highway and the airbags didn't go, I've nailed a deer with one and the airbags didn't deploy, minus these new Fiats, The company that made the airbag that Chrysler used in these Jeeps was sued for 10 years straight because of these airbags never working and going off in the most inconvenient times, I'm pretty sure the only way they stopped getting sued is because the last judgment exempted them from getting sued anymore which is insane because people are still using their products that they sold that are 85% defective but they dont care, if you live in a state that has inspections I feel so bad for you because it's a complete sham made for companies to profit off of instead of caring about safety, All they want to see is that stupid air bag light off and they don't actually care if the airbag works. If they did they'd allow us to still sue that company.......
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Right after I watched this video I woke up and went to the junk yard and got the same wheel and swapped mine! Love it! Thanks man!
What jeep is that steering wheel from
2011-2017 Jeep Compass or Patriot
Do u have the link for the guy that dose the borde for the cruise control
Just eyeballing this it looks like you can swap the "inflation charge" from one steering wheel to the other. They are held on by four bolts. Take the single stage inflator off the old steering wheel and bolt it on the new steering wheel in place of the new two stage inflator. I haven't done this, but if you measure the bolt pattern and it's the same. it seems to be an easy solution for keeping your airbag operational.
True I never thought about that. I'd be worried something goes wrong and I'm not interested in it exploding in the face. 🤣 but good idea thanks!
For anyone wondering about the airbag.
The new airbag has a dual charge. A primary and a secondary.
This is because newer collision detection systems have the ability to detect the severity of an impact and fire the higher or lower airbag charge.
You can connect the airbag but it will take some research to decide which charge you prefer to have operational and how you want to go about connecting the wiring.
Just do your research and be careful
any tutorials?
I feel the same about the cruise, with gears and 35s it's still a lot to ask for it to handle. Ironically cruise was on my short list when looking at jeep and I probably turned away a few better options that didn't have it... Personally I love the feel of the factory wheel and mine somehow has not falled to pieces yet. I would recommend talking to Project Dan H he is super friendly youtuber you've probably seen his vids. He likes upgrading steering wheels and knows a lot about how to make different models play nice.
I actually found your video trying to go trhough options to modernize my XJ. It is a 98 2 door model and honestly, I just want to keep the body and the parts I cant replace by any means like the dash and door panels.
I think new wrangler seats can be adapted into the XJ (at least the front ones) and some other things. For the steering wheel, replacing the buttons for other functions sounds amazing, not sure what functionality would be best for most people, but Audio controls are super popular for this location, so it could be a good bet if possible.
While you're back behind the gauges for that light, rip that damn beeper off and replace the lights with LED. :D
This steering wheel fits great! ❤
Looks sick, might try this on my 2000 TJ thanks for the info ✌🏼
You know what man, I looked an xj a couple months ago and this guy did this steering wheel mod and I asked him about the airbag light and he said no light. And I thought that meant he got it working. It didn’t even look occur to me that he just pulled the bulb. That sneaky bastard haha. Good thing I didn’t buy it. Who knows what else he lied about.
Just a thought about the airbag, why not just cut the wire end off both air bag harness's and switch them out? IF your new wheel didn't come with the pigtail for the air bag, you might have to hunt one down. Hope this helps. New wheel looks great!
I thought about doing that but the old airbag just has 1 pigtail connection and the new one has 2. Not sure which one to hook up and definitely afraid to hook up wrong and blow the bag. I always worry when out wheeling about setting it off on a trail so now thats no longer a issue. Thanks!
I was told that connecting the 2 stage airbag in parallel to the existing ACM wire will get the airbag light off.
That was from a vendor in Etsy.
Airbag plugs can be purchased from ebay brand new. That is where I got mine from.
Can you remove the airbag from the horn and just swap the airbag component?
I'm torn by this. I like the updated look but I really like my overland WJ wheel in my XJ.
All the mods are cool, I get it, but only if you never intend to sell it. If you ever try to sell a modded XJ you'll never get back the money that you put into in but I guess that's true of any modified vehicle. My XJ is bone stock, maybe someday I'll have enough money for a 2nd XJ that I can lift and modify, that way I'll have the best of both worlds. The only mod that I really want to do is the airbag delete. I just don't trust a 25 year old air bag. For that reason I thank you for posting this informative video.
Non car people are the ones who won't pay for a modified vehicle. They don't understand. As for mine it's not going anywhere. That jeep was the inspiration for this channel. I couldn't do that to it. Thanks for watching!
@@nextweeksadventure also checked out your transfer case linkage repair video which will come in handy for me. Thanks!
@@paperthinpizza super easy to do and definitely way smoother than the original setup. For $20 you can't go wrong on this upgrade.
i have a 99 xj i likw the old steering wheels but not really look at the new ones.
keep talking you are good at it
FYI, NEVER adjust the centering of the steering wheel by moving it a spline or two one way or another. Make sure it's exactly where the previous wheel was. The clock spring is designed to only turn each way a certain amount and you will ruin it if you adjust your steering wheel to center it. Center your wheel properly by adjusting the steering components during an alignment.
The wheel is indexed to only go on 1 way. So the option to adjust it at the column is not happening.
when you bolted down the wheel and drove it did you feel the wheel had a little resistance? i think the wheel needs a little relief in the back casting for the wire trough that supports the ab, cruise and horn wires, i believe the clockspring is binding, and slap a 2.7 ohm resister between so no illumination...
Wheel feels just like the old one. Only wire is the horn and its fine. Airbag and cruise wont hookup because airbag is a gen 2 style with different connections and system that runs it. Guy on etsy sells a kit to make cruise work but I'm not a fan of cruise so not doing it. As for the light eventually I'll pull the bulb out. Inspections are a thing of the past it's registered historic now so nobody will fail it for something so I'm not worried. The moaning from wheel has been doing it since I bought it shes old.
I've got everything working with his mod and airbag as well, I will have to make a relief for the lower plastic portion that butt's up to wheel from clockspring. Just curious if you felt the same it's pushing the spool into clockspring g
Housing
@@richardtugwell6229 I've never noticed anything out of the ordinary after doing the swap. When I installed it I went kinda heavy on the nut that holds it down so mine sits as far down as possible. Feels like the old wheel.
Wished these worked on a 93 lol
I would like to but the cruise control switches off of you 98 steering wheel.. I have a 98 but eh switches the last owner put in were a later model where they changes the amp signals after 98 so mine doesn't work
If you installed a newer one would it work?
My question is...will any jeep steering wheel work ?
No only the 2011-2017 COMPASS/PATRIOT wheels will fit. Because the spline size is different on other wheels.
I think this is from a wrangler jk...or its the same as patriot,compass
I mean i bought a jeep grand cherokee 2014 steering wheel (looks the same as this one,jeep wrangler jk etc) BUT IT DOESN'T fit it has a bigger hole 😢😢😢😢
Is there anything i could do ?
Thank you for your time
@christospapanagiotou2003 Check description in video it says what year and model wheel to get. This is because the steering shafts are same size.
@@nextweeksadventure i just saw one of your comments saying just that ...buy compass 2011-2017 not grand or wrangler they look similar but they are not the same....i found out the hard way 😔
Any idea if this would work on an 86 MJ
Sorry I'm not sure. They used different size spline shafts for different years and I don't know all the sizes.
Did you use the same bolts from the old one? Mine didnt come with any bolts 😅
@@frankierivas3684 I know I didnt buy any but can't recall if it came with new ones either. I'm pretty sure I used the old hardware.
@@nextweeksadventureold ones bolt right on
Hello, I really like your idea. I have a Jeep Wj and I'm wondering if I can replace the steering wheel from the Compass to my Wj.
I saw the steering wheel swap from Wj to Xj.
What do you think ?
Regards
I've seen people put grand cherokee steering wheels in xj's before. So I would assume this wheel would work in it but I can't commit to saying 100% it will.
@@nextweeksadventure Thank you for the quick reply.
Regards
@@Jolly-Sid69 Heey, I'm planning on doing the same swap, have you done it?
@Jolly-Sid69 have u done it?
I did it, it works!
For anyone else watching just skip to about half way into the video to actually see what the title of it says happen
Great video God bless...
I'd like to wire in my window controls on a steering wheel lol
That would be wild! I'm still really considering taking my wireless winch controller apart and working it into my wheel.
HELP! I can't find the cruise option adapter
I did a search for it. Shows as sold out. You might try contacting the guy who makes and sells them see what he says.
@@nextweeksadventure could you send me a link? And I love the jeep. I have a 2000 patriot blue one. Your videos help out alot! Keep making them lol
@@Gaugeburns50 try this one.
www.etsy.com/listing/1460608845/cruise-control-adapter-board-for
It might take some digging but I think you can contact the seller somehow and talk about getting it.
What year compass
2011-2017 COMPASS/PATRIOT WHEELS ONLY
GRAND CHEROKEE/JK WRANGLERS LOOK IDENTICAL BUT THEY HAVE A LARGER STEERING SHAFT AND WON'T FITIN XJ OR TJ
I've got a 92 XJ Limited. Will this swap work on my jeep?
Not 100% sure but I dont believe this will work on your year. I can't find the notes on wheel hub sizes across years and models along with the wheel itself. They had several different models with different size bores.
Do you know if it will work on a WJ ?
I've heard people put wj steering wheels in xj's so I would think it will work but I'm not 100% sure. Sorry.
@@nextweeksadventure thanks if that’s the case I’m thinking it should be
Im only here watching this to change out this steering wheel. I think the stock XJ steering wheel looks ugly
What's hilarious is that Jeep airbags are Known to not work. I have been in one that rolled on the highway and the airbags didn't go, I've nailed a deer with one and the airbags didn't deploy, minus these new Fiats, The company that made the airbag that Chrysler used in these Jeeps was sued for 10 years straight because of these airbags never working and going off in the most inconvenient times, I'm pretty sure the only way they stopped getting sued is because the last judgment exempted them from getting sued anymore which is insane because people are still using their products that they sold that are 85% defective but they dont care, if you live in a state that has inspections I feel so bad for you because it's a complete sham made for companies to profit off of instead of caring about safety, All they want to see is that stupid air bag light off and they don't actually care if the airbag works. If they did they'd allow us to still sue that company.......
Taking out a safey feature, just because the steering wheel is smaller then the old one. One HB less :))))))
I’ve hit so hard with trees and rocks airbag has yet to deploy so who cares
Exactly mine doesn’t even have an airbag lmao
The cherokee airbags feel like getting slapped by a flannel shirt incase you ever wondered. 🤣
same size wheel
What year compass?