Off-Grid LPG (Propane) Gas line Installation for a Tiny House
HTML-код
- Опубликовано: 17 авг 2023
- This video is a full instructional review on how to install a LPG gas line for a propane heater. Winter is upon us and we need some off grid heating for our cabin or tiny home and a propane needs to be brought into the cabin for my newly installed Martin 20K BTU Vented Propane Heater. In this video, we will show the problems we faced installing a gas line and our own tips and tricks we discovered during the installation. Hope this Do-It Yourself (DIY) step-by-step will be a great help to all of us off gridders.
#offgrid #tinyhouse #camping #diy #travelvlog
__________________________________________________________________________
A NEW CHANNEL IS COMING | Please Follow: FEARLESS OFF-GRID ( / @fearlessoff-grid ) for future off-grid/tiny house content. All of my DIY content will be moving there in the near future.
___________________________________________
Leave a Tip:
streamelements.com/fearlessra...
___________________________________________
Social Media:
/ fearlessrambler
/ fearlessrambler
e-mail: fearlessrambler@gmail.com
___________________________________________
Send Me a Postcard:
P.O. Box 552
Willard, UT 84340
___________________________________________
I accepted your offer to take a drink every time you said "1/2 inch". I watched the video 3 times. Now I'm hammered. Thanks, Fearless Rambler!!!
Lol, I think to get hammered, you only need to watch it once, but thnx for the views. Have a great day
Can't wait to follow your off grid adventures!
Thanks for taking the time to make this video. Well done!
My pleasure! Hope it helped out. Have a great day.
We will be installing propane soon in my canning room so this helps so much!
you welcome, have a fun project
Great work George!
Great job George!
Kudos Fearless Rambler for sharing this valuable tutorial on LPG gas line installation!
C4H8 is the perfect family gas for all your propane accessories!
Your step-by-step guide is incredibly helpful for those of us looking to bring that clean and efficient propane heat into our spaces. Your expertise and tips truly make it seem like a manageable DIY project. Thanks for empowering us to take control of our off-grid heating needs. Keep those informative videos coming!
Thank YOU!!! for this video. This just the video I needed to watch. Getting ready to add a small three brick wall heater in my trailer.
Have fun with you project and I hope it goes well, have a great day
This is great!
love the shot of the trees
Fall is always as time of the year, but I appreciate the heater. Have a wonderful day.
Good Morning Fearless Rambler 👋👍😃
Super Great Video Fearless Rambler 👍😃😃
Nice video 👍👍
Thank you 👍
There is a lot of great information here. We would have going with 1/2 inch as well and probably made the same mistake.
Hello I am new here I am doing the same I am buying shed to make a tiny home too put on my 5.09 acres land you gave me so many Ideas I will be Leaving 1st of September to my land in Ozarks Mt. in Mo
Fearless Rambler you be Extremely Careful with that Propane Bro PLZ 👍😃 Awesome Video Bro 👍😃 I can't wait until MONDAY BRO I'M EXCITED 🤣👍🤣
Great video!! I can't wait to follow your journey on your other channel. Heading over now to subscribe
They should have had a 1/2 inch fitting to begin with...ugh.
Nice video! Next time use galvanized piping for outdoor . Cheers
Thanx for you comment and idea, with a little research this is what I found out, plus or zone regulations required black pipe for gas (ore yellow flex pipe) above ground.
Is black pipe better than galvanized for gas lines?
The difference is that galvanized pipe is coated with zinc, while the black pipe is not. Black pipe is best used for gas lines, not for water lines because it rusts easily, while the galvanized pipe is the safer pipe to use in water lines, but it cannot be used to convey gas.
You do not want to use galvanized pipe for gas because of the galvanized coating. Over time pieces of the galvanized steel will flake off and clog your gas regulators and burner units. Never mix galvanized and black iron or where they touch corrosion will be accelerated.
I also had to paint the black pipe when outdoors due to rusting, so I used black grill paint, Rust-Oleum 249310 Automotive BBQ & Stove Spray Paint
Hey Fearless Rambler you still having A Video Monday Bro? I can't wait to watch 👍😃
Thanks for the video, lots of great info. What did you use to underpin your cabin? It looks fantastic!
Please, if time permits, provide sources for materials. Thanks.
They recommend 1/2 inch to allow for expansion and available room in the pipe to create gas in the coldest months. In Alaska this room necessary because propane will turn back into a liquid state at minus 20°f depending on how the wind blows.
Thank you for the insight, have a great day.
i use pink teflon, pipe dope always left me with leaks. i do have decent luck with teflon and dope combined tho, so i do that for critical things.
pink does gas, water, and large pipes, so only need to carry 1 color... for basically anything.
Perfect 👌
Thanks 😄
Great video, thank you for taking the time to make and post it! Very helpful and clear! Question: souldn't the sediment trap be downstream of the valve?
Martin shows the sediment trap before it gets to the manual shutoff valve leading up to the heater (see page 12). So I placed it where the installation manual shows it. It has worked well for us, but see your local codes before installing the gas line and heater. They may require a different configuration. Have a great day.
propanedepot.ca/wp-content/uploads/2016/11/Martin-MDV-Installation-Manual-2018.pdf
I just don't trust these LP pressure regulators that don't even have a 0-3 psi gauge as part of it. I WANT to know exactly what the LP pressure is. I added a "T fitting" so I could add the low psi gauge and monitor the pressure. I set mine at 0.5psi with the heater set on Max output.
Hey
Great Vid! whereabouts is your cabin? I'm in Arizona and land is hard to come by and not as pretty.
Its in Utah up by Monte Cristo
Hi Fearless Rambler. I saw your video about propane. I have an off-grid home that uses propane from a 400lb propane tank for a stove, dryer, bbq, and most recently a furnace. It seems the furnace does not get enough gas to stay on when the furnace kicks on while using the BBQ or stove. I was thinking of adding a y brass adapter to the tank and attaching two 2-stage pressure regulators at each end and attaching the furnace gas to one and the rest of the home to the other, but I'm not sure this is the best solution. Do you have any insights as to what is the best solution? Any help or guidance is apprecaited. Thank you!
Something quickly came to mind is your stove burner ports are setup for natural gas and not LPG. Your 400 lb tank should have enough surface area to allow for proper flow for most multiple LPG applications. A 100 gal/420 lb propane tank should be good enough for all of your cooking and heating needs, as well as multiple appliances. Depending on the amount of propane you use, you may want to install more than one of these cylinders, or possibly even a larger one. LPG grills can suck up a lot of gas flow. RV regulators also have a tendency of going bad and restricting flow. Oftentimes, it's the internal diaphragm that breaks. It is said that a Two-stage propane system regulators are designed to ensure consistent delivery pressure and efficient operation. These regulators are particularly adept at minimizing the supply pressure effect and accommodating a significant amount of droop, which is the variance in delivery pressure from no flow to maximum flow. The two-stage design allows for a steady pressure output, even as the propane tank's pressure decreases, which is crucial for maintaining safety and performance. For your Idea of using multiple regulators, I have not tried that. Hope you have luck with that. A (home) residential application will require a low pressure regulator which reduces the gas pressure to 6 ounces (10.5 inches water column). This low pressure regulator will be located on or near the main supply tank to the home, motor home, or camper. So you might want to calculate the required flow needed to operate you applications at the same time. Your main regulator might not allow enough flow to meet your needs. Using a RV two-stage regulator, the first stage drops the vapor pressure to approximately 10 to 15 psi, and the second stage further reduces operating pressure to 11 inches of water column. Hope this helps, if this did not, still have a great day.
@@FearlessRambler thank you so much for your guidance!
@@cesararellanes6188 Your welcome
You’re exactly like my dad…anyway….
Does your regulator have a 1/2” outlet or 3/8”?
My current set up with the same heater from tank to heater: single lp regulator to 3/8” to 1/2” CSST running about 15’ ft to 1/2” iron pipe to 1/2” valve 3/8 adapter fittings to stove. And I cant get the pilot to ignite. No leaks in the line. I’m wondering if maybe I need 3/4” gas lines for higher pressure…thoughts?
Thnx for the complement, I have a 3/8. 1/2 gas line should work with a LPG stove, but tank size could matter. Surface area in the tank could be the problem.
Your regulator is stuck or faulty.
Bang on it while no pressure is going to it. I have same issue happen every winter after my regulator has sat unused. Plus purging takes a lot longer than you think it will. I have to purge from the heater for 2-3 minutes holding down my pilot knob.
You said 100lb tanks 4 foot tall...and u used 40 or 60lb tanks.....will 100lb tanks work ?
The 100# tanks will work wonderfully, but they are heavy to move around.
What regulator is that?
Cant remember, but I will head up this week and check for.
Do you propane for heat during the winter????
We don't go up during the winter, but it keeps us nice a warm during the cool fall.
@@FearlessRambler what is the consumption like on the propane?
I understand that a 30# Propane tank (7 gallons) runs around 30hrs at 20,000 BTU. Our Shed is well insulated so we don’t run the heater all the time. Usually, to break the chill off in the morning. The fuel consumption is .926 lbs/hr. We did not use a whole 30# tank throughout the fall. If we ran it throughout the winter, I would install two 100# tanks. Have a great day.
@@FearlessRambler that helps a lot thank you.
So you modified a regulator. Not everyone can do that The usefulness of this video stopped there.
Didn't modify the regulator, just built a mount for a cabin and installed the lines per code. Have a great day.
So you misunderstood the video…
Sorry. You are not 'off-grid" if you are running to a hardware store for propane.
It is only two hours away to get propane, I designed this project so it feels that it's not off grid, though no cell, spring water and solar makes it feel like home.