First Look at my New Mods ( and Turbo Noises ! )
HTML-код
- Опубликовано: 4 окт 2024
- Please Subscribe!
Amber Fog Lights - amzn.to/3UvplDh (Affiliate Link)
www.buymeacoff...
GR Corolla Mods ( Thank you for supporting TeeJayLC ! )
Buy Wheel Spacers HERE ! - amzn.to/4gzyPHV (Affiliate Link)
Buy Sequential Turn Signals HERE ! - amzn.to/3MBmSUd (Affiliate Link)
Buy IMT Start Stop Eliminator HERE ! - amzn.to/3yBHMiG (Affiliate Link)
Buy Amber Fog Lights HERE ! - amzn.to/3WhHKGh (Affiliate Link)
Revel Carbon Fiber Seat Insert
Eibach Sportline Lowering Springs
Cusco Upper and Lower Control arms
Front Camber Bolts
AWE Catback Exhaust
Marvel Motorsports Carbon Fiber Steering Wheel
Safety Restore Ferrari Red Seat Belts
Blitz Strut Bar
Rally Armor Mudflaps
XSE OEM Rear Spoiler
Powder Coated Bronze Wheels
Most Used Tools on my Channel ( Thank you for supporting TeeJayLC ! )
Wheel Protector Impact Socket - amzn.to/3BenL2F (Affiliate Link)
Foam Knee Pad - amzn.to/3NiMq9f (Affiliate Link)
Heavy Duty 8Mil Gloves - amzn.to/3ZEvrFw (Affiliate Link)
Impact Wrench - amzn.to/3WsSYrd (Affiliate Link)
Torque Wrench - amzn.to/467WN88 (Affiliate Link)
1/2 Drive Socket Set -amzn.to/3WgXojE (Affiliate Link)
Impact Drill - amzn.to/4c0oDVG (Affiliate Link)
Impact Socket Adapter Set - amzn.to/4bIXk2y (Affiliate Link)
1/2 Ratchet - amzn.to/4d7qit2 (Affiliate Link)
Low Profile Floor Jack - amzn.to/4d6Pyji (Affiliate Link)
Jackstands - amzn.to/4f8gReD (Affiliate Link)
Trim Tools - amzn.to/3VdfWSr (Affiliate Link)
Hook and Pick Tools - amzn.to/3WWq6Il (Affiliate Link)
Drill Bits - amzn.to/3yIhURL (Affiliate Link)
Electric Drill - amzn.to/3KioAsA (Affiliate Link)
Impact Wrench and Cordless Drill Combo - amzn.to/3yfINwf (Affiliate Link)
Impact Adapter for Sockets - amzn.to/4bEce9D (Affiliate Link)
Flat Head Screwdriver - amzn.to/4dWNcov (Affiliate Link)
Ratchet Set - amzn.to/3QNCyX6 (Affiliate Link)
Magnetic Bolt Holder - amzn.to/3QNCSoM (Affiliate Link)
Get $30 FREE when you sign up and spend $30. Tons of sites to earn money on!
If your not using this your losing free money!
www.rakuten.co... (Affiliate Link)
I’m gonna be installing a front sway bar on my grc next week and looks like I’ll need to lower the front subframe and remove front wheels to install. Curious to know the best way to get this whole car onto 4 jack stands
Ok 👍🏼 that's awesome! The best way is the center bolt on the front subframe and there is a center knob looking thing on the rear center. There are pictures in the owners manual of where I'm talking about. After you get those jacked up you can throw some jackstands on the side pinchwelds pretty easily. But check the owners manual for the jack points. They have really nice pictures! Good luck 👍🏼 and let me know how it goes!
Do you have any mods to accentuate the turbo choo choo noises (Bov or intake)? Or is the noise from factory?
😆 🤣 no, I haven't done anything to the engine or turbo setup. All stock there
Are those the stock wheels just powder coated?
Yes sir
@@teejaylc If you dont mind me asking, how much was the powder coat? Looks really good!
I spent 500 on them. Thanks!
Do you have the mic in the engine bay? The BOV sounds is too like compared to normal listening from the driver seat
Yeah, it's in the bay