Adding More USB Power Ports to my Jeep!
HTML-код
- Опубликовано: 6 сен 2024
- When you have a lot of electronics and tech mounted on your dash, you need somewhere to plug them all in! This mod will solve your issues so you don't need 37 power strips.
Link to similar ports: www.ebay.com/i...
Buy Shirts Here:
teespring.com/...
Support This Channel on Patreon!
/ chrismeacham
Follow me on social media!
Instagram:
www.instagram....
Instagram (Jeep page):
www.instagram....
For Business Inquires Contact:
meacham039@gmail.com
Software/Equipment I use:
Edited On: Adobe Premiere Pro CC
Cameras: iPhone 6S, Canon Rebel T6i (18-35mm, 55-250mm)
Microphone: Senal CS-88
This was good,
thanks! It would have been better if you showed yourself connected the wires.
You can close the gap with a heat gun. Heat it with a heat gun then push it in place with a towel. Hold it until it’s cool, about 3-5 min. It will mold to the contour of your dash.
I’ve been watching a bunch of videos on these installs and you’re the first I’ve seen using the riv-nut. 👍🏽
Your music sounded like it’s from an 80’s montage 😃
That is cool beans. Almost wonder if it could be put up top in the tray, that way when you have your phone attached to the vector bar the cord would be right there and not draping down the front of the dash.
MSTrishRN Good idea. The wires dangling doesn't really bother me though!
Cool install. In my Jeep, I have one in the front in place of my cigarette lighter as I don't smoke so just used that instead, and it only works when the ignition is on, and that is fine by me. On the rear, I have installed a double as well, but added a switch so I control when it is on or off and it won't kill the battery either as it is not 'on' or hot all the time.
GREAT JOB! im going to download this video, i have a honda civic hatchback and i need usb ports in it soooooo yeah thanx man
Goodluck, have fun!
Make sure USB port draws no current by itself (offstate leakage for all you propeller heads)
Thanks for this video.
I'm wondering if I can add a new USB socket charger to my car and connect the new socket wires with the old socket wires as join connecting only negative and positive lines.
I prefer to avoid the fuse box work because the fuse box is located in the front, and the new socket I'm looking to place will be next to the rear seat. 10 inch from the old socket charger
Nice Mod and very useful!
I installed mine above the Front Passenger Speaker and used M4 Hex Screws.
Props for using a corded drill.
Yes, nice video.
I didn't know you were going to to remove your radio to the usg project .
I'm interested in upgrading my radio. Can you make a video showing how to remove the radio section?
Great Mod Kid..
Do you have a video showing how to add another 12volt outlet to a jeep JK?
Nice job!
What size is the piece that you used to drill the hole for the round usp Port?
I used two different drill bits for this I think, it’s been a while. Titanium coated stepper bits from harbor freight, (1/16”-7/8” and 1/4”- 1 3/8”)
I need help it’s not the fuse my usb port just doesn’t work what should I do
Why did you fit horizontal instead of vertical, then it would fit without the gap?
Why didn’t you just use the unused “option” buttons under your hvac controls?
Hey man the link doesn’t work any ideas where I can get one or what I can search for on Amazon etc
3 USB 3.0 Car Charger, 12V/24V 36W QC3.0 USB Charger Socket, 3 x USB 3.0 Socket Charger USB Outlet Fast Charge with 10A Wire Fuse Aluminum (Black) www.amazon.com/dp/B08K271H6W/ref=cm_sw_r_cp_api_glt_i_RSAGVV8BFCXCKGNRP0BY?_encoding=UTF8&psc=1
Can you connect that usb to an aftermarket radio to connect to apple carplay/android auto?
I’m sure there is a way. But plug and play won’t work, the only wires wired into the usb is for power and ground.
You said you ran it through your SPOD so is the power to your USB ports turned on/off by one of the switches on your SPOD now?
erik drown my custom SPod has ports that are just 12v outputs, no switch needed.
I'm rooting for you bro, appreciate your outcome but your methodology needs help, way too many ways this could have got screwed up.
U should had just removed the outer plastic peace and made the hole only for the usb and could have avoided extra holes and a better clean look.
What is the name of the tool you used to put screw plugs
Farooq Ntale threaded insert tool. You can find one at harbor freight. www.harborfreight.com/45-piece-threaded-insert-riveter-kit-1210.html?cid=paid_google%7C%7C%7C1210&mkwid=s%7Cpcrid%7C385410433886%7Cpkw%7C%7Cpmt%7C%7Cpdv%7Cm%7Cslid%7C%7Cproduct%7C1210%7C&pgrid=84231239448&ptaid=pla-819465254766&pcid=6549823817&intent=&gclid=EAIaIQobChMI5pDQ-pui5wIVU5JbCh3MRAjvEAQYASABEgKeTfD_BwE this is the one i use
Heat the plastic fix the gap hair dryer
Could you have put it in vertically?
Yes
👍👍
why not remove the 12 lighter accessory. Use that space.. sorrry but would not do this..
Get your windshield fixed first
You should’ve put it vertically.
GenRock! I’m gonna add another set of ports above it
Chris Meacham yea that should fix it.
Just put chewing gum in the gap