@@WavyRoseGold I paid about $1400 ish, still waiting for the shipment to come in. Ordered back in April through Shock the Mob. Now going to Japan at the end of the month, might source some parts out there during my trip.
The stock intake manifold was so well designed by Yamaha that HP gains from ITBs on a stock engine are underwhelming. Edit: that shifter lock-out is nice, who makes it?
i was thinking of just placing a larger throttle body on my stock intake manifold, not sure if there is gains to be found from that. The shifter lock out is from JSP. jspfab.com/products/jsp-beams-j160-reverse-lockout-shifter
@@kelvinarreola I think maybe the N/A 2J unit might be worth trying. However, you may not see an increase in power. A smaller diameter TB can give you the venturi effect, where air goes from a narrow/ high pressure area to a comparitively low pressure, which increases the velocity of your air.
All I heard was that it drives so... ... it'll drift just fine 😏
i thought the same!
And he's almost maxed negative on his camber plates so he's like right there for a drift setup 🤙🏽
he also has adjustable control arms!
Man really said terd wing lmaoo Love this channel
Thanks for watching! Glad you enjoy the content!
What is the heart thing called?@@kelvinarreola
Great looking car!
Yea! When you gonna finish yours!!!
@@kelvinarreola I need to set time aside for it and I haven’t.
Saving for one.
Pricey, get a te72/ke70/ae71
Sounds nice!
Yea engine sounds good
The be one fancy ranfla!!!
I was scared to even stand next to it
Kelvin furiously posts Corolla content THEN Toyota releases the GR Corolla. Coincidence? 🤔
Yes coincidence, just happens my channel caters to people who like shitty old Toyotas , corollas specifically!
i think i saw your car at a car meet in LA i think
Probably you did his goes to a lot of car meets
Ratchet club has the same requirements as jccs or toyotafest?
He said the people were ratchet but the cars aren’t?
@@kelvinarreola 🤔🤔🤔then I gotta find a way to be ratchet lol
What is the heart thingy called ?
Tsurikawa
Where in Cali are you located? Your hatch is very nice!!
Los Angeles area! Thanks !
@@kelvinarreola I’m in SacTown. I need to restore my hatch, just ordered some J Blood fenders and bumpers.
@@nolanoropeza8877 i know the there is a bunch of AE86's in the bay area
@@WavyRoseGold I paid about $1400 ish, still waiting for the shipment to come in. Ordered back in April through Shock the Mob. Now going to Japan at the end of the month, might source some parts out there during my trip.
The stock intake manifold was so well designed by Yamaha that HP gains from ITBs on a stock engine are underwhelming. Edit: that shifter lock-out is nice, who makes it?
i was thinking of just placing a larger throttle body on my stock intake manifold, not sure if there is gains to be found from that. The shifter lock out is from JSP. jspfab.com/products/jsp-beams-j160-reverse-lockout-shifter
@@kelvinarreola I think maybe the N/A 2J unit might be worth trying. However, you may not see an increase in power. A smaller diameter TB can give you the venturi effect, where air goes from a narrow/ high pressure area to a comparitively low pressure, which increases the velocity of your air.
I wanna know what those dinguses were eatting.
Asada! What’s up with your car
@@kelvinarreola its dead, valves are bent😭 sounds like no compression when cranking
my dream car :(
Start grinding, homeboy had 3 jobs to make it happen
The Surfab pan is only $540 USD
nzd to usd, wooops, thanks!
@@kelvinarreola for sure. $540 is still expensive don't get me wrong but it's "slightly" more reasonable than $800...
In europe you pay 35000euro's voor a ae86😅and you guys are use them for drifting😅😎
Made to to 86 views 👍
Your car is next! Let’s film it in the mountains
Nice build man 😍. If you get a chance check our channel we have probably the firts 3SGE beams swap into a 1979 Datsun B210 wagon 💪
Thanks for watching, I’ll check it out!
Josh and idiot were chewing in sync
What else is new