@@TAMARbarCNC Wow, how is this possible, most THCs use arc voltage to maintain a consistent distance from the plate while the torch is cutting but you were demonstrating it without cutting, nor does a fiber laser have a arc. Awesome machine that you have built btw!
My THC uses arc voltage as well. I've managed to connect the fiber laser head capacitance sensor to the thc. So the sensor sending voltage to the thc, and the thc thinks it's arc but it not haha.
@@TAMARbarCNC thank you for the answer. But after looking at the manual and youtube video of controller that the fscut3000s will only cut tube and not sheet. Is that correct?
Hi my friend, I make my own fiber laser 1K, but my controller only use 3 axis, could you told me wath controller you use, the model, I wanna replace my raycus for this, I realy need the 4th axis, thanks
I'm using centroid acorn 4 axis plasma controller. It's a plasma controller kit from centroid that includes THC, and I've made it compatible with fiber laser.
You certainly have the cutting sequence worked out. 😎
fabuloso. nice work.
Hello, good video, what parameters and gas do you use?
What is the original plasma table model brand ?.. or is it diy?
Здравствуйте...интересное у Вас Видео
What light source and lense are you using?? Do you have any build videos
Raycus 2kw laser source
hi, nice video , do you use a air or another gas? thank you
I use oxygen
What software do you use that writes the code for doing that pipe on that 4th axis ?
Sheetcam rotary plasma plug in
Focusing looks very smooth, what type of autofocus system does your laser have?
It's not auto focus.
Auto focus in fiber laser is something else entirely.
What I'm demonstrating in the beginning of the video is THC
@@TAMARbarCNC Wow, how is this possible, most THCs use arc voltage to maintain a consistent distance from the plate while the torch is cutting but you were demonstrating it without cutting, nor does a fiber laser have a arc. Awesome machine that you have built btw!
My THC uses arc voltage as well.
I've managed to connect the fiber laser head capacitance sensor to the thc.
So the sensor sending voltage to the thc, and the thc thinks it's arc but it not haha.
@@TAMARbarCNC Great idea! Looks like magic tho
If you were to build another sheet and tube 4axis fiber from scratch today what control would you use?
Fscut3000s
@@TAMARbarCNC thank you for the answer. But after looking at the manual and youtube video of controller that the fscut3000s will only cut tube and not sheet. Is that correct?
Nice, are you using servo motor
Yes
Hi my friend, I make my own fiber laser 1K, but my controller only use 3 axis, could you told me wath controller you use, the model, I wanna replace my raycus for this, I realy need the 4th axis, thanks
You want to cut sheets and tube also?
@@TAMARbarCNC Yes, for the moment only I cut sheets, but my controller don't have the 4th axis.
@renyk if you want to cut tubes square tubes I recommend that you'll use fscut3000s
@@TAMARbarCNC Tanks my friend, let me check about this controller.
Hi! what is THC model?
I'm using centroid acorn 4 axis plasma controller.
It's a plasma controller kit from centroid that includes THC, and I've made it compatible with fiber laser.
@@TAMARbarCNC Thancs!
היי, נראה מדהים, גם אני בניתי פלאזמה ורוצה להפוך אותה ללייזר, יש מצב להתייעץ אתך?
מוזמן אחי 0525686316 תמר בר
Are you using closed loop stepper dude
Currently yes, besides the rotary axis with is servo.
I plan to replace all the close loop to servo.
Why in closed loop finishing not good dude?
@kalyanasundaram1583 they are not fast enough and and the acceleration is not fast enough.
What frequency you use to cut in raycus dude
What is pulse repetition rate and pulse width you set in raycus source software in hardware emissions control
Голова ВТ240S