Это видео недоступно.
Сожалеем об этом.
Full undercarriage change on Deere 850J gets real interesting
HTML-код
- Опубликовано: 31 май 2022
- It’s gonna get wild in this one! We are replace some undercarriage parts on a civilian 850J with some military surplus parts. See what all we get into!
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Website
www.ccsurplus....
Email
Sales@ccsurplus.com
When your sons says "I'm an idiot" and your immediate response is "You're not an idiot" and then go on to explain how to proceed properly was a wonderful part of the video.
Me to my neighbor: "You wouldn't happen to have a spare wrecking ball laying around? ... absolutely ... doesn't everybody?" WOW !!! What a great dozer you'll have for the new property ... can't wait to see her make her first cut ~~~
I like the “ watchmaker’s tools” you all used for that poor old Deere. The wrecking ball took the cake! Such delicacy!
The frankendeere came together nicely, its always nice to go out back and find what you need, no backorder dates involved, everybody needs a hammer like that in their toolbox!
Frankendeere... Excellent!
As always...good to see grandpa, son and grandson working together!
Hunter, you are not an idiot. You are a bright young man with a great future ahead of you. Please don't call yourself names. It's demeaning and discouraging. Take care young man. You have my support.
Whilst the wrecking ball use as a sledge hammer was more than impressive I am stunned by the power of the electric grease gun to compress that whopping big coil spring and tighten the track! I cannot begin to think about just how much stored energy is in one of those track units - no wonder it shot the idler wheel assembly at least half way across the workshop floor.
I think that gun can pump up to 12000 psi. Multiply that by the area of the cylinder ram that loads the spring; your somewhere in the vicinity of 150000 pounds applied force. Correct if I’m wrong!
That made me recall an old story from a factory which made buffers for railcars (in Europe):
One of the cylinders cracked and shot the buffer about 200 m across an empty field. From where it ended, it was about 50 m to the nearest freeway.
As I recall, those springs were compressed with about 150 tons of force.
I'm so glad that when Mike(Dirt Perfect) got that first 850, that he unfortunately had some issues with it. Had those issue never surfaced, he would of probably never had the video with you explaining the issues and you striving to resolve them. Had that not happened, I would of not known about your channel. So glad I did find your channel through Mike and have really been enjoying your content. Keep up the good work.
i really enjoy your channel and all its content. but what i enjoy the most is how you treat everyone especially your boys. they are very lucky to have you as a Dad and teacher, and a place like yours to learn.
Thanks
Hopefully you saw the interaction between Clinton and Perfect. There were several lessons dealing with each other and patients and making things work for the best.
WOW - talk about stored energy. That track had some major release. Glad all your crew OK. That wrecking ball/sledge was awesome!👏
Also, so cool you have 3 generations of your family working with you - blessed!
Yup I need that.
he is very lucky/good whatever you wish it to be called that he didn't get a nasty grease injection injury on his arm. cool chanel though glad i stumbled across it. they are actually too far from me here in Indiana
Trust me you're an international content, nad it's really pleasing to watch the show and it's very informative by the way. Thank you bro for doing this.
I had an emergency bay door repair to attend to a few years back. It was the middle of winter so the door was closed, they were doing the same undercarriage replacement as you guys and the idler went through the bottom of the door and 20 feet out into the yard ! It bounced off the bumper of a service truck and scared the hell out of the the guy in the cab. Caused about 15 grand in damage. SO much energy in those systems !! Stay safe guys.
Yes there is
This is one of the most interesting video series...and a major testament to the kinds of not-so-obvious hazards you can run into in a heavy equipment shop. Kevin getting worried when unbolting the track...the idler shooting half way across the shop once the rust yielded...and then there's the grease fitting not holding. I know fluids under extremely high pressure can be injected through skin, the idea of it happening in that situation is very cringe-worthy. I hope that bruise heals well. Using the wrecking ball like that is pure Camarata...brilliant!
Thanks
Hunter is a lucky Man to be able to Work with , not only his Dad but his Grandfather ! !
That was impressive. I learned something new today. Wrecking ball to the rescue. Who would have thought? Love the channel. Good to see the boss
Sometimes you gotta think outside the box
Kevin forgot to add "red headed"!!!! Lol just kidding, we don't beat him, he stays in his crate!!!🤣🤣🤣🤣🤣
Lol
If all else fails consult grandpa, address the dozer and let the wrecking ball fly! This video is in parts a near calamity and huge fun to watch. Be careful guys - loved it.
Thanks
That wreaking ball trick was awesome! Holy cow that grease shooting that far was incredible, glad you're ok.
Great video Clinton
Thanks
Watching these repairs and your knowledge of the machines, is as impressive as watching a Heart Surgeon repairing valves in a Heart! When you were at the Florida auction and were searching for different machines, you knew instinctively what was useable/rebuildable or just plain JUNK! Not many have that machine "sense" anymore.
Thanks
Greetings from NZ, at age 70 I just love watching your channel and restoring these huge tractors. We dont have many this big here! All the best.
One of the best RUclips mechanical episodes ever! Only thing im missing is a close up on that ceiling grease stain 😂
Keep up the good work!
This is gross, so if you have a weak stomach stop now. I had a painful cyst on my back and laid on the examination table while the doctor started pushing. The contents went four feet sideways and made it to the ceiling.. Clean up in exam room two.....
The power of hydraulic pressure is awesome.
That's cool watching the tool they break into safes in movies Well done guys keep after it Always a joy to watch
Had same issue on my tractor. Starter had rust and wasn't grounding to frame. Took it out, removed rust and has been working ever sense.
I once helped put a track back on a 450H in a foot of snow. Three of us, a skid steer, and a couple cable come alongs made for a memorable day.
I bet
Well done Hunter, fits like a glove, very professionally done. I can see great things in your future, keep up the listening and learning.
One of the best videos you guys have done! Awesome!!! I'm glad that nobody was hurt when the wheel let go. The wrecking ball was a great idea. Wow!
What an awesome video Clint! Talk about action packed.. guided missile grease projectiles, flying heavy steel and wrecking balls.. All we were missing was some Diesel Creek work ethics and some Andrew Camarata drama yeah and it would have been the whole shebang! I totally loved this episode and huge huge thanks for sharing as always!!
Thanks
@@C_CEQUIPMENT actually in hindsight.. that wrecking ball was so Andrew Camarata lol ... Wont move.. i have an idea.. lets use a wrecking ball instead.
I second this comment. I was on the edge of my seat!!!
@@oddtechman be nice no need to be cutting down poor Clint.
@@brianbabb6666 I am being nice. It was the excitement and throwing everything at it including the kitchen sink that really made me appreciate it more! I trained out of college as a mechanic so have had a lot of times where i have had to use uncommon methods to achieve my goal!
MBTS used one of those air lances on DP’s old low boy to put a new king pin in. That is a wicked tool to have in your arsenal. Nice job Clint and Kevin.
Nice green and yellow 850j tractor 👍
When my Dad was in military ,He always want 5-ton 6x6 military diesel truck but My Dad never made it home from over seas,Been trying too find one that's in good condition for me & love all Youal videos!
Thanks
If you were a kid in 1960, you'll remember a cartoon called...."The Hunter"!!
Now to clean the grease off the ceiling metal!!
Lucky the grease did not cut a chunk out of your arm too!!
Glad everyone safe and that project completed! Great work again Clint !!
Yes I was
My dad used a homemade puller to remove stubborn idlers. But hey, that wrecking ball was pretty entertaining. Grab the big ladder, Kevin. You've got a ceiling to wipe clean!
Enjoyed the wrecking ball. You are a good teacher. Keep them coming. Thanks
Tools, knowledge, experience- all were used on this one !! Really paid off at 53:15. Thank you - ready for more Clint.
Yep
Thanks
Nice job you guys are not afraid to takle anything.
the comedy duo of Clint and Kevin is about equivalent to the comedy team of Dirt Perfect and Man Behind The Scenes. very enjoyable vid guys.
The oxy lancing was cool to see done. Very effective. That wrecking ball was no less effective. Put a whole new meaning to a BFH!! Another excellent job done by all.
Thanks
And you keep telling your boys they're wrong when they call themselves idiot or some such, when I was their age I'm guessing 13 or 14 I made some dunderhead mistakes my dad wasn't around then but my mom instead of reassuring me called me an sob and told me to get out of the way she'd take care of the project, I think she saw me as a grown up at times because I was 6'4 when I was 14 and I reminded her of dad. But you keep up the good work you're doing a really good job at fathering, just that short minute made this video all that much better, God bless.
Thanks
Wrecking ball persuasion is a new one !!!!
Gotta be the coolest summer time learning experience.
My you tube favorites...Special K and Super C ! I look forward to every video
Hi from uk guys👋👍 excellent job done here and was another great watch in my eyes and always be careful especially knowing the damage that spring can hold behind the idler👍 watching that one push out could only beg to differ the way other one flew out 🙈😱 I take it as the idler cant go forward the spring compressors? And hunter did well parking the dozer in that gap for blade👍 we'll put that down to a run of good teachers👌 cant wait to see half a day on new land get that blade nice and shiney👌 thanks for your time and be safe see you soon(hope your arm ok clint👍)
All is good
Thanks
LOVE IT WHEN A PLAN COMES TOGETHER!! The A Team hard at work. Keep them coming all go contend
Now that is a whole new meaning to hammer mechanic. The shear size and weight of the parts involved in heavy equipment repair and the risk to life and limb, you boy's earned your money big time the last several days.
For sure
I enjoyed this rebuild plus all the funny bits. 🇦🇺😃👀👀
Cool
I love putting equipment back together. I quit calling it used equipment and started calling it twice loved equipment.
Definitely not afraid to get it done! Watched a few of your videos and can't imagine a better shop for a broken tractor to go for repairs.
Great job Keven is always on top of the job
I think you boys took the saying watch your front two teeth to an all new level, safety always wins. Great job.
Thanks
Another great video brilliant to see how you can make something out of virtually nothing Kevin is a brilliant asset to the company great to see how you all can work together keep up the good work guys and hope to see the deer in action soon 😀
LOL 👍 stuff flying everywhere. Awesome video. Great Job Guys. Thanks for sharing 👍
Thanks for watching
For years we used the exothermic rods to cut 6" diameter pinion gear shafts off locked up Locomotive Traction motors. We lit them off with an Acetylene Torch as the battery method is a PITA. Can whack thru a shaft in about 20 minutes, compared to an hour or more with a cutting torch. Can fab up a catch pan for your molten metal out of stainless steel to save your concrete. Love the Wrecking Ball knock her loose method!
little bit of paint and you wouldn't be able to tell, great work
I like it when your son is hard on herself, you correct him by a positive comeback. That's a father that is tuned in and teaching his kids.
Thanks God bless.
Thanks for the entertainment! Helps the time go by! Good group of men and one looney but also a good guy be safe! God bless
Thanks
Wheeeew…! There is a whole lot of energy in a small package, regarding that idler and the spring behind it…, “yikes”…
Love these videos Clinton…, love seeing the whole crew (dad, Hunter, Uncle Randy, Kevin) in the mix.
Thank you sir.
Thanks for watching
👍👍 another interesting and enjoyable hour Clint, by the way that guy on the backhoe sure got some " big balls,"😉
That’s right lol
Grandpa's old school idea with the wrecking ball gets the job done, no replacement for experience! Good stuff!
Hello from Worldwide Diversified Auctions! Bill Hartman, we spoke a few times. Love your channel!
Almost fell off my chair when Kevin said, "Hit is like a step child." 🤣
Lol
The wrecking ball trick was awesome 👍👍
That dozer is ready fo many more hours of work. You guys do awesome work and i love the way you keep the shop clean. Gos bless you guys for keeping the big bad working machines going.
Thanks 👍
Clint that was an amazing video to watch. Really enjoy the process and your expertise in doing the Frankenstein Dozer! Thank again for taking the time to share this amazing process. Absolutely love the channel, Kevin is a rock star. Oh and I appreciate your including your boys into the business. One day they will prosper from your knowledge.
Thanks
Had to demo a rail yard they got me a touch and a quickie saw that lasted one day then contacted my local welding shop they turned me on to one of those touches and bingo we where speed demoing great tool
Great Video. I love how you include the boys, including Kevin!
HOLY SHNIKE, DUDE! You got some kinda luck not catching that grease fitting any place else. Dang! I bet that grease stays on the ceiling for as long as the shop stands, right? Safety first. Always. Great video showing the dangers and what can happen when working with undercarriage on heavy track equipment. 👍👍
You guys aren't just a pair of pliers. You are the whole tool belt!
Awesome, love the wrecking ball.
Wasn’t grandpa’s first rodeo, thank you for your videos
those old tracks make awesome field drags, put a 6in i beam in front & chain links to track every 3 ft, need a 80hp tractor to drag it but i levels everything!
I bet
Great Video Clint!! Time for a little yellow paint on those green frames and chains! Ha Ha Thanks for the video Bub!!
Thanks for watching
Good job Clint and guys.
Thanks
Shooting a tube of grease on your ceiling made me spit my milk out laughing so hard. It’s only funny when it happens to someone else. Had my share of that🤓
On numerous occasions, I've heard Sam at Scrappy Industries and Matt at Diesel Creek say "Don't force it. . . Get a bigger hammer". Well, they've never gotten a hammer THAT big before. 🤪
Well done, fellas. Stay safe.
I have was a heavy equipment mechanic for 12 years and have seen some stuck idlers, but that one takes the cake! That wrecking ball was awesome!
Big Boys and their BIG Toys ! Love it with your mechanical ease of it all. I think you should show Hunter what you would like done on the investment property for dirt moving. Get him able to picture the work in his head first and then let him GO FOR IT ON HIS OWN TO LEARN. :_)
Yup many of us would like to see the boys playing in dirt with it. Not just the big boys enjoy it. They have to share with their SONS. Future operator's/Future side work. 🙂👍
Lots of force in those springs.
Yes
I've seen it all now, a wrecking ball for a hammer. But it worked. I personally didn't think it would. What's that they say, when you have a hammer, everything looks like a nail. LOL. GREAT VIDEO, thanks for sharing.
Hi Clint and crew you have done a very good job. It is now a useable piece of equipment. Love the refurbishment. Bravo from Victoria Australia
Thanks
This one has been one the best one yet on your channel.
Thanks
Kevin is an oversized magical creature, a true Jolly Green Giant among Leprechauns.
Great video story.
In a branch office of the Company I worked for back in the 1970's one of our Mechanics lost his life when a track idler tensioner let go. It was 'sprung' with nitrogen behind the grease.
Apparently it went off like a rocket and our man was in the wrong place at the wrong time, so I was told. So, when you folks were swinging that ball at the idler, I was sucking air through
clenched teeth. I was wondering if in that other 'dozer's short life, did somebody run that in salt water? That's about what we could expect too, considering
the rust that held the idlers in place. Regardless though, you got the jobs done and done well.
I have watched this video, I don't know how many times, the grease rocket is still my favorite scene.
Great to see all you guys working together!! So dangerous but you guys stayed safe!! Looking forward to seeing this dozer do some work!! Stay safe always!!
great video Clint thanks for taking the time and explaining what you are doing 👏👏👍👍👌
Man those idlers could kill someone flying out of there. I had no idea those would become so seized up like form just setting, but you built a nice machine out of your part bin.
Thanks
Everything can be dangerous for sure
always great when your own stuff dont want to work when you do another thing to add to the list. always fun hanging out doing work and some fun and laughs. cheers fellas.
Thanks
Oh man Kevin you are the comic of this day
Had a similar problem with a D6H in Belize that had been parked at by the side of the road for nearly 2 years....both track adjusters were seized solid and both tracks totally shot...wish I had a wrecking ball to release the font idlers..I cut the old tracks off rather than trying to split them....once I finally got the idlers were freed off and cleaned up job was sweet as a nut...biggest problem was trying to dodge the monsoon storms and lightning...great to see you change the complete undercarriage...👍👍
"Hit t like a step chald"😄😄😄 "Oh...Nat sposed t say that "...🤣🤣🤣
Ya had me at "MIKE LINDELL"...... Great trick & congrats!! + A new Sub.
Lol
That wrecking ball was a thing of beauty... It was almost Camarataesque...
Lol
Gees, lucky no ones face was in the way of that grease when it shot out. Another good advertisement for always wearing safety glasses because you never know what is going to happen. Stay safe guys.
For sure
Thanks
"Just that easy" famous last words😂
Have learned a lot watching you work,you have a great crew. Thank you
Good show and Job. I haven't seen a job like that done before "verrrry Interesting but Strange"
Fantastic job, loved the old wreckin' ball action. Sometimes the old ways are the best.
For sure
Your teaching Hunter well,great encouragement ,and stopping from saying he is stupid ,Good Dad !
Keen to see the Deere working on the property ,is Dad claiming the hot seat ?
He may
Man love this video and whate a hammer, This is a very good team you got .
Thanks
What an understatement! It was very very interesting. Glad no one was hurt when the wheel flew-off.