SIMRIG Update 2024 "Sim veteran`s perspective" | Tech Talk | Nesterowicz Racing | 4K
HTML-код
- Опубликовано: 5 июл 2024
- Simrig update of my current setup, a setup that prioritizes immersion, quality & fidelity.
As i do not compete at the highest level no more other factors play in.
Enjoy a Sim Veterans perspective!
Simrig closeups (00:00)
Intro (0:39)
Tour (1:00)
Showcase accessories (12:34)
SIM Gear:
- Ascher Racing Mclaren Ultimate QR2
- Fanatec Podium DD2 Wheelbase QR2
- Simtrecs ProPedal GT
- Fanatec F1 2020 Limited (Mag shift) QR2
- Fanatec Podium Porsche GT3 Wheel QR2
- Fanatec ClubSport BMW GT2 Wheel
- Fanatec ClubSport Shifter SQ V1.5
- Fanatec ClubSport Handbrake V1.5
The Rig:
- 49" 240Hz Curved OLED Samsung G9
- TRAK RACER TR160 + SIMLAB Pedal tray
- Streamdeck
- 4x Dayton Bass shakers
- 4x 50w Channel Amp
- 24 Button/ switchbox
- Track IR5 motion tracking
- 7" Telemetry tablet
- UV Flashlight for Illumination (Blacklight)
- DENSU Flaglight
Computer:
- Gigabyte OC RTX 4090 24GB
- AMD 5900X 12c24t @4,7GHz
- 64GB DDR4 RAM @3.6GHz
- 1x500GB Nvme M2 (970evoplus)
- 1x1000GB Nvme M2 (Intel 660)
- 2x 1000 GB SSD (MX500)
- Asus Zenpad 7"
- Sandberg wide angle webcam (2x)
- Logitech K830 keyboard
- Plantronics R.I.G 500 Headset
- Corsair RX1000W PSU
To watch races LIVE, follow -- www.twitch.tv/nesterowiczracing 
Игры
What a great setup, and having a dedicated room to race and store your gear, and then edit in a quiet environment is 🔥
It's not at all cheap BUT have a look into the Smyth Research A16 Realiser. It can get complicated but the short story is, it 100% will accurately sim a 15.1.8 channel Dolby Atmos, DTS:X, or 13.1 Auro-3D surround system inside a pair of headphones. It will also allow for an external subwoofer (or two) to be attached as well for realistic sub and infrasub frequencies. It's not the gimmicky 7.1 surround sound headphones that Logitech or whoever push. This is a prosumer/professional device created by one of the founding members of DTS, James Smyth.
I would be more than happy to walk you through it completely free of charge. I love your channel and want to see it pushed even further.
Very complete!
Nice room and setup is very well organized, cheers
Need to review my cable management hehe. As I've upgraded lots over time. So a fresh rewire is due
Very nice setup. Looking great
thx
You are next level
Super cool setup Bud 😎🤩
Thx man - result of 7 years of commitment and trial and error. :)
Looks good mate!
thx
awesome rig man!
Thx man - result of 7 years of commitment and trial and error. :)
After using triples, I could never go back to a single screen, the immersion is just a lot better
thats what i thought too :) almost 7 years with triples - but using headtracking helps + the frametime is much lower making things fluid.
@@NesterowiczRacing I never have any issues with fps, but that being said even at some race starts with full grids if the fps drops to below 90 I don’t even notice it, I would have to look at the fps display to know it’s lower than usual. Perfectly smooth. I just did an hour league race at Fuji in the wet and all setting are at max and I was streaming and still perfectly smooth with average fps around 100
We used to race in pc2 together, not sure if you remember
Wow really! Good times in PC2! :) and he's triples still give that more "edge" but I tested and end up with this small Ultra wide :). Hope you are good mate
I went from triples to a 49” ultrawide and I find it much more immersive as their isn’t any line in between the screens
Very good setup and video :) I too use Trackir, can I ask you to share the profile you use? I mean the Trackir profile, Thank you very much 😊
Here you go - its only active 7 days from now. IMPORTANT my Trackir trackclip settings are : (Speed 0.6 and Smooth 19) combined with this profile we.tl/t-o1Tfgndvkm
@@NesterowiczRacing you rock :) many many thanks
Such a clean neat setup.....great thinking with the desk at the back and monitor on an arm. Where did you source the track maps on the wall, ive been trying to find similar things to 3d print but not easy to get lots of tracks at same scale and quality
here + they are in scale to one another :)
instagram.com/world_race_circuits/
@@NesterowiczRacing thank you so much!
Nice setup! I have something similar in regards to dual use monitor, however my rig is next to my desk and I swing it over to the side.
Is your monitor arm the ergotron HX? I have read that it is not good to have the monitor go behind the monitor arm like yours is positioned for sim rig, have you had any issues? I am interested to know because I would like to rearrange my setup to be like yours so I can get the screen in a better position.
So it is the same design as the ergtron hx - but cheaper. And i drilled a hole in the solid table for more centered mounting. And there are no issues, of course i do not extend the screens super far over towards my simracing position. but i have it placed close as i want. closer than my previous triples!
Do you rotate the monitor and use the other side of the desk for gaming or work? If so, that looks like a good use of one great monitor. I'm thinking of doing the same thing. Is the rig also on castors because it looks there isn't much space under the desk.
yup. but i did another setup when i had triples. i could rotate all of them in 1 pivot :)
Can you provide some details on the transducer amp? Is it a usb input and 4 channels, and what brand?
I made a link in the video. To my video about the transducer setup. I mention it there. But it's a noname brand amp and USB soundcard
i want that wallpaper
Do you think, the trandducers can be good enough to be used with an t300rs wheel instead of a 12NM dd-wheel ?
Can the transducers substitute the lack of force feedback of the wheel (when the strength of the wheel is not prorised). Thank you.
By the Way...nice Setup you have.
YES! The transducer setup is a DIY project that cost me 200€ total. And honestly it gives any wheelbase a compliment as it is a separate system and the input is your bottom and back hehe. I would never build a setup without it . Never
Very nice setup, can you share the wallpaper please?
yup!
www.wsupercars.com/
What did you get to do the top gear style leaderboard?
So I went to a "blacksmith " asked if he had any flat iron bar. And he did. Asked him to cut it and drill 2 holes in it .I took it home cleaned it also with s bit of oil. Then mounted. And bought rolls of magnetic tape that can be written on. And I use a Dymo label writer and put the times on the magnetic strips
Can you share graphic settings for best iracing performance in a 240 display
Many thanks
Sure - take note i use NVCP (nvidia) to cap frames at 240 - not in iRacing. as there is no reason to heat up the GPU
I marked the items that are heavy on GPU and that i find valuable to adjust as shown. Of course AA is also heavy .
click to see screenshot > imgur.com/a/GFqYtTn
You need a haptics in your pedal the Simagic shakers , it will make a difference.
I have 2 transducers that are bigger than simagic. Under the tray where my heels are. That gives small vibrations when abs or curbs are hit. But also engine rev
Have to try its VR much more fun than flat screen
Not sure if you are referring to using headtracking? because i think using trackir5 with a ultrawide is the perfect mix between VR & HighFPS +IRL look = Hybrid VR :) VR is fun for a little while. in my experience :)
@@NesterowiczRacing Track IR cant compare to VR bcs dont have this senesce of depth that VR gives you. It really feels like you are in the car much more natural than the monitor. I have RTX 4090 like you and all is running very smooth , even ACC :)
@@martintop2605 yea i have had VR myself i prefer triples or ultrawide. VR is ok for a little time 1 or 2 hours. i do big races too, i.e i did 6 stintes in 7 hours in the night on 24H Nordschleife - i could not do that with VR :)
Very good setup and video :) I too use Trackir, can I ask you to share the profile you use? Thank you very much 😊
Veteran using fanatec base 😂😂😂 thats enough for me, the only great thing you has is ascher mclaren wheel which ir great ;)
By now top reviewers and drivers all know that the quality of high end DD engines is very good and close in comparison to each other. I know some people think slew rate is everything. But IRL it's also a marketing (number ) as a human Body can not react below 20ms. So feeling difference between 3and9 ms is hard. I tried the asetek and simucube many many many... times. They are good for sure. But not better imho. if anything maybe 5% "better" max :)
And as the DD2 has been out for 5 years the firmware and software is very refined. Which is essential.
Thats not true, i tried fanatec dd1 and as i has simucube 2pro i immediatle felt some artificial feeling in the base when turning the wheel. So it is not 5 % difference it is for me almost completely different feeling. So simucube 2pro all the way!
@@amigoz3201 its true the nature of the rotation of the outrunner vs inside electric engine is different and both DD1 and DD2 has a texture on no power rotation compared to Simucube, but that has nothing to do with the ffb ;) so one can say simucube feels smoother, but it does not relate to effect. but im happy you are happy for simucube, its good, but i tried it so many times and to me it is not better at all, sometimes (with bad settings its even worse) for me :)