Cool channel seen a few of your videos now they alright. I'm the same as u I just love rcs I've got far too many 😅... Wrong never can have too many can we lol. ❤
This would be a good nitro for a newbie. If you can make that complete maybe throw in a few extras, theres no reason why a newbie wouldn't give you at least 50 for it. I did one a few month back, purchased it for 20 and got 100.
Cool. That car will be on the road in no time. Hope the drivetrain/transmission is just a small issue. That is a very good engine. Love that slow idle. Like your channel. Here in Southern California.
hola amigo mio soy victor de españa en estados unidos hay muchos coches de nitrometano y hay muchas tiendas de coches rc haras videos de cambios de embragues y demontajes de motores nitro y de los de 35 cc y alguna reparacion de taladros de arranque y mesas de arranques y de emisoras sube los videos de 45 minutos porfavor hay alguna fabrica de motores nitro en estados unidos cuidate muchisimo y que dios te vendiga a ti y toda tu familia que sois todos maravillosos un fuertes saludos cplega 🥰🥰🥰🥰🥰🥰
That's similar to my old RC car I bought on eBay new, knock-off 4wd .15 nitro engine (mine is the purple metal, bigger engine or smaller). Fun car really performs for cheapy stuff. Name is like Hobby(something). Did you end up selling it?
I have 2 ideas for it 1 fix it up and have it as a beater hammer it or 2 do a giver way on that 3 how much would you sell it to me for bearing in mind I have watched your vids since you first got that Honda e300 generator😉
hope youve thrown that receiver in the bin cause there used to be a crystal in th rectangle/square ish hole. indicating that this was probably made pre 2001. then again 8 pounds for a chassis and working engine is a great deal!
Bargain price cheapest nitro car i got from ebay was a cen about 33 times the price of this or more it run well but was so slow my mates tamiya tl01 chassis electric were far faster with 18 turn motors in them so i sold it on ,The best nitro is my protech phaser 4 starts well and survived lots of jumps .
@@HaggardRC but do you a Nitro Kyosho 1/10 Zilinder this one is broken too it was givtet to me song time Ago and i restord it exept the zilinder that had a crack in the top
Hi, I’m from Durban, South Africa, love your video’s. Learnt a lot. Keep it going. Thank you.
That's a high end vintage model imo, look at the ball & socket swinging arms and ball diffs, I'd say that's a steal 👍
lemme know if you've sold it, I'm interested in that.
That went ages ago I’m afraid Vinnie 😅
@@HaggardRC No worries pal, thought I'd just check 😂👍
almost looks like a heli engine with that sort of compact looking heatsink head.
0:01 nearly got heart attack :D
special effects are something alright
Hey man! This is an old Smartech. I've had two of these when running there great!!
Thanks!
@@HaggardRC you're welcome! There is a video on my channel of me running one around from years back haha
Smartech, yeah forget what model mine was, I'll have to look more into it,
Ayy me too! I have a speedy tiger that I’m about to get running!
You still got it
i feel another frankenstein rc coming soon
Great video bro. been looking at your videos for some time now. interesting always ! That receiver looked like a graupner one.
Haggard - gets new car
Me - nice
Haggard - omg sandpaper
Me - BRUH
Nice little car Love the Ebay bargains!!
hey bud love the videos keep them comeing do u still have this car
I believe that brand is Smartech
Cool channel seen a few of your videos now they alright. I'm the same as u I just love rcs I've got far too many 😅... Wrong never can have too many can we lol. ❤
I got one of these as a random car, suspect its hot bodies?? Mine got a .21 engine fitted
This would be a good nitro for a newbie. If you can make that complete maybe throw in a few extras, theres no reason why a newbie wouldn't give you at least 50 for it. I did one a few month back, purchased it for 20 and got 100.
I’ll see how it goes 🤪
Prime!!!!
Cool. That car will be on the road in no time. Hope the drivetrain/transmission is just a small issue. That is a very good engine. Love that slow idle. Like your channel. Here in Southern California.
Thanks! And I sold it now haha.
Looks like a smartech rc
hola amigo mio soy victor de españa en estados unidos hay muchos coches de nitrometano y hay muchas tiendas de coches rc haras videos de cambios de embragues y demontajes de motores nitro y de los de 35 cc y alguna reparacion de taladros de arranque y mesas de arranques y de emisoras sube los videos de 45 minutos porfavor hay alguna fabrica de motores nitro en estados unidos cuidate muchisimo y que dios te vendiga a ti y toda tu familia que sois todos maravillosos un fuertes saludos cplega 🥰🥰🥰🥰🥰🥰
Hola, no sé nada de los Estados Unidos. Nunca he estado allí.
Love these will it start vids 👍🏻
Looks like a smartech
Cool I love nitro rc but can’t afford it
It's a kyosho i think
oh man was my first rc car i know by looking at the engine and chassis i am sitting with R40 need engine
😂😂
Would be good rebuild series for this car ..
Beat intro of all time man!! 😂
Best*
Yay new vid and new mic and new car, love it man!
Haha I have this same rc car but yours is a bit modified and has a different heat sink it is a 2001 hpi rs4 3 but yours seems like a bit older.
HP Nitro Mt 4. Am HP receiver. I did that car early 2000s probably 01.
That's similar to my old RC car I bought on eBay new, knock-off 4wd .15 nitro engine (mine is the purple metal, bigger engine or smaller). Fun car really performs for cheapy stuff. Name is like Hobby(something). Did you end up selling it?
Yeah I sold it lol.
You never took out the go plug to see if it works?
Yes he did. 11:08
I think you might find it's a kyosho
I have 2 ideas for it 1 fix it up and have it as a beater hammer it or 2 do a giver way on that 3 how much would you sell it to me for bearing in mind I have watched your vids since you first got that Honda e300 generator😉
Then next video do a comments reading and tell us what your gunna do with it
Right you are!
I had one also not very fast I mean mine I had to do alot of tuning 😆
you tried to start it before seeing the condition of the glow plug?
Yep, that’s right :)
hope youve thrown that receiver in the bin cause there used to be a crystal in th rectangle/square ish hole. indicating that this was probably made pre 2001. then again 8 pounds for a chassis and working engine is a great deal!
ooooo i love an opening.. i mean unboxing...sorry
Do you repair nitro buggys at all please??
Good video I would of done the same thing and do a video on it all by it for £10 and £4 post bro
Put the engine in the rush
I think the receiver is an old futaba it very similar
And I'll never know lol.
ill buy that car
Bargain price cheapest nitro car i got from ebay was a cen about 33 times the price of this or more it run well but was so slow my mates tamiya tl01 chassis electric were far faster with 18 turn motors in them so i sold it on ,The best nitro is my protech phaser 4 starts well and survived lots of jumps .
and 2 days before my birthday lol
Is it still for sale? Brother
By the way let me know what you need for the sav, I've got bits you can have. Let me know bro
I think its a smartech
Dimi James I think ur right
Yeah think that's it
Correct
i want it because my one has a bend zilinder can you ship it to germany?
you can seng me an e-mail if you want to sell it
I’m afraid it’s long gone now :(
@@HaggardRC it's ok
@@HaggardRC but do you a Nitro Kyosho 1/10 Zilinder this one is broken too it was givtet to me song time Ago and i restord it exept the zilinder that had a crack in the top
id buy for a 10er
victory hawk ??
Think its a smartec
Got hair all ova it then puts it in his mouth class 😅😅😅
G’day have you sold this thing yet XD it’s been a year
Yeah long gone lol
That's a panty dropper there mate!
It a old kysoho fazer.
Is it?
take that receiver off and throw it in the garbage, dont know what it is but if you still want to sell i maybe interested
I will buy for 30 👍
If I had to guess very old hip rs4
Looks like a hpi rs4 nitro
Give you £20 for it!!
Iv got one that doesn’t run really struggling have you got whatsapp
I’m afraid I don’t have WhatsApp.
I can help on here though what’s the problem? What have you
Done to get it to run so far?
YOU have a a very strong accent, I dont understand some words you use, i"m a yank, not a wanker.
Haha well if you want me to expain just ask :)