Hey Paulo, I went on Amazon or ToysHub & actually found a brushless stock size tail motor. Just remember. It's not that brush that's your enemy. It's heat. If you don't expose enough of the motor to put a proper heat sink, along with silicone heat sink compound connecting it to the motor, and think you can fly it for long periods, without checking how it's holding up heat wise, you'll be one of those guys walking up to your downed helicopter, smelling a burnt smell. Also, spend 6 dollars & get you a Lipo low voltage alarm & put on your helicopter, so it doesn't fall out of the air and go crunch.
SeLby, I apologize for all the posts, but here's something else I read. There's a defect on some of the V913's, where the rear prop motor shaft does not have proper clearance, & has caused rear motor failure. It might just be a smart thing to do is to inspect it, before it's flown, or risk having a failure that could of been avoided. I've seen this on RUclips, more than 2 times. Probably just a little piece that didn't get trimmed off the plastic properly. Fly Hard!
Hi Wayne, I am glad you like the new review :) Yes you are 100% right. I will do this modification asap and publish photos in the associated RCgroup thread.
Thanks for the vid. Look forward to see which BL tail motor you run with. Saw one guy that had put a really sweet brushless motor on his I haven't been able to find anywhere. See if you can find the vid. It's a really HQ motor & had an orange or green prop. I can't remember. Another mod is swapping out the main rotor cap with the red MJX F645 F45 001 Aluminum Replacement Cap as it's wider and helps to minimize canopy & boom strikes from the flybar.
I had a V913 my bro bought it from Malaysia. We played it once for the first time and it was good. But the very next day it doesn't fly anymore. I don't know what happened. The sad thing is I don't know if WL toys have a branch store here in the Philippines so they can assess what possibly had happened to my unit.
please help the red light in the helicopter is blinking and the transmiter dont work i think is the chanel but how to change it sorry by my english im portuguese
10 лет назад
Do you know any Brushless tail motor for the V913?
Standalone no ... but I know there are some MJX kit ... very similar for the V913
10 лет назад
- The kit MJX-F45 gives ??? this one ( www.ebay.com/itm/Red-Brushless-Tail-Motor-system-for-MJX-F45-F645-upgrade-part-easy-install-/261567047099?pt=Radio_Control_Parts_Accessories&hash=item3ce69c65bb ) -And then to configure, you can help me?
Somebody pls tell me what to check on why it doesn't work anymore? I don't even know to tell if the charger is full or not knowing that my bro left the manual in Malaysia.
ola amigo eu tenho um v913 e gostaria de melhora ele nesse 913 o que vc fez de melhora e quanto fica a modificação e o que eu preciso e vc tem as peças pra vender
Hey Paulo, I went on Amazon or ToysHub & actually found a brushless stock size tail motor. Just remember. It's not that brush that's your enemy. It's heat. If you don't expose enough of the motor to put a proper heat sink, along with silicone heat sink compound connecting it to the motor, and think you can fly it for long periods, without checking how it's holding up heat wise, you'll be one of those guys walking up to your downed helicopter, smelling a burnt smell. Also, spend 6 dollars & get you a Lipo low voltage alarm & put on your helicopter, so it doesn't fall out of the air and go crunch.
SeLby, I apologize for all the posts, but here's something else I read. There's a defect on some of the V913's, where the rear prop motor shaft does not have proper clearance, & has caused rear motor failure. It might just be a smart thing to do is to inspect it, before it's flown, or risk having a failure that could of been avoided. I've seen this on RUclips, more than 2 times. Probably just a little piece that didn't get trimmed off the plastic properly. Fly Hard!
Great review SBD. ESC on lipo not a big plus but plenty of room to move it. If it had a BL tail I'd probably go for it!
Hi Wayne,
I am glad you like the new review :)
Yes you are 100% right. I will do this modification asap and publish photos in the associated RCgroup thread.
Thanks for the vid. Look forward to see which BL tail motor you run with. Saw one guy that had put a really sweet brushless motor on his I haven't been able to find anywhere. See if you can find the vid. It's a really HQ motor & had an orange or green prop. I can't remember. Another mod is swapping out the main rotor cap with the red MJX F645 F45 001 Aluminum Replacement Cap as it's wider and helps to minimize canopy & boom strikes from the flybar.
Was the helicopter stable right out of the box or did you have to make any adjustments?
Execpt trimming, no extra adjustments required for this one
so the v913 has a 850mah battery too? Thanks
- Good evening, I have a V913 with main motor Brushless, but liked to change the tail motor.
- You know some Brushless Kit for v913 tail motor?
Do you know any Brushless tail motor for the V913?
I had a V913 my bro bought it from Malaysia. We played it once for the first time and it was good. But the very next day it doesn't fly anymore. I don't know what happened. The sad thing is I don't know if WL toys have a branch store here in the Philippines so they can assess what possibly had happened to my unit.
please help the red light in the helicopter is blinking and the transmiter dont work i think is the chanel but how to change it sorry by my english im portuguese
Do you know any Brushless tail motor for the V913?
Standalone no ... but I know there are some MJX kit ... very similar for the V913
- The kit MJX-F45 gives ??? this one ( www.ebay.com/itm/Red-Brushless-Tail-Motor-system-for-MJX-F45-F645-upgrade-part-easy-install-/261567047099?pt=Radio_Control_Parts_Accessories&hash=item3ce69c65bb )
-And then to configure, you can help me?
Hi,would appteciate if i could have a video of how to wired all part to the pcb of the v913.thnks in advance
سلام خواستم خواهش کنم از این مدل یعنی وی ۹۱۳ وارد کنید چرا از این مدل نیست در ایران .؟ 🙏
Hi please tell price this helicopter
the v666 transmitter is compatible??
+lncajonathan Unfortunatly not.
Somebody pls tell me what to check on why it doesn't work anymore? I don't even know to tell if the charger is full or not knowing that my bro left the manual in Malaysia.
You could possibly get the manual online
hi friend please tell place this helicoptar
Thanks for your effort speak english. I was able to understand 👍
I just received the V913 and the manual is horrible...can anyone tell me the proper battery charging steps......thanks
Just plug the charger into the provided charger... via the balancer plug. Wait until light dissipear... (> 1h)
ola amigo eu tenho um v913 e gostaria de melhora ele nesse 913 o que vc fez de melhora e quanto fica a modificação e o que eu preciso e vc tem as peças pra vender
Do u get it free
I'd appreciate if anybody could help me. Thank you. I'm a first timer with this kind of toy....