Damn, the bedlined box looks slick as hell; that top lip is what really sets it off. Now, imagine how good the installation would look if the bed was bedlined to match!
Another great episode man! “Why don’t you shut the f$&@ up Doug?” kills me every time! And when the customer bell rings you instantly stop and you’re like “can I help you” cracks me up every time
One of the rules of thumb is that there is enough space in front of the port from any walls or other objects and the minimum distance should be at least the diameter of the port. So putting those rear seats down or removing them would probably wake up the sub end of your system. The proximity to the rear seats will detune your ports. If say the port is 10in dia and you have a wall in front of it 5in away, the port will act like a longer port than calculated. If it is closer like it looks here, the pressures from the box will be impeded. Give it a try and test with seats up then down. There should be a noticeable difference. ;) Mags
Nice box! Now you just need a flush mount tonneau cover, tinted windows, black 22's, cat-back exhaust, lowered rear suspension and take off the side steps 😅👍
Looking great! Don't forget to coat the sliders on the bottom of the box as they'll soak up the water that runs into the valleys. Not that it's due to rain for another 5 years , so I guess you just about have time :-) Looking forward to some Mule action, and no, I don't mean your evenings with Rafa's mom :P
Ok you’re breaking my brain. I love the work Leo does over at Frog Leap Studios, and I just saw the acoustic version A-Ha did on mtv unplugged of Take on me...
I know a guy that could anodize It after you cut it to fit. Could clean deez knucks up too. You must be looking to sandblast those by now. East coast though. Love the show Doug.
Just to be clear, Ii was saying it is available already anodized or coated with a factory finish. I would think your metal supplier should be able to source it. www.cutsmetal.net/diamond-plate-sheets-colors/ diamondlifegear.com/diamond-plate-aluminum.htm
Paint the back of the plexiglass where it's cut for the recess with black paint instead of polishing it. It's will look the same as polishing from the out side and the carriage bolts will blend in better too. Plus It will only take 3 episodes instead of 9. Lol. Looking great man!
I wouldn't paint the diamond plate gloss black Doug, i think it would reflect a lot of that Cali sun right into the cab and or your eyes if you need to look out the back window.
Awesome box build , except for one thing. You didn't Rhino line the rails that are touching the bed of the truck on the bottom of the box. Water is going to turn the MDF into loaf bread.
What's up Doug, I was a little worried for a min. The Car Audio News Reporter (On my channel lol) said your explosions were at a all time low and you was being safe. In other words I gave you a shout out. Keep up the goods brother stop by when you can for some News 99% chance you will laugh your ass off :) :)
Looks really good. You do work hard. Spaceman very lazy, I would only want to install that box once. I think the wires deserve their own little port and blow-through, Capn'. For the new window, router-in small T-track slots on the edge, use black painted T-bots, and slide the window and bolts in as one piece, tighten from the inside. No more bolt heads sticking through. +10HP!!
That box is a hernia waiting to happen. A beautiful, sexy hernia. Does Doug have a favorite playlist that he is willing to share? I've heard some good beats on these vids.
Hey Doug. Has anybody ever told you that the speaker wire your using is to small for that sub.lol.jkjk bud.Keep up the good work. The box is looking and sounding amazing. 👍💪
No tomaste en cuenta que las guias de madera que le pusiste entre el cajon la batea cuando llueva van absorber agua!!! y por ahi te puede hechar a perder el cajon no cres?? Saludos bro!!
You rock! Great Job man! Keep up the good work. I definately want to bring you my car to design some shtuff in the rear deck. I cant wait to see you make a video bout it. RockOn! Bless your b'ASS
F150 by far if you're talking about the strength of the bass, either way he has the amazing $1000 Sony radio deck in the F150 which is the best SQ possibly really...on the other hand the mule has the PRICELESS Macintosh deck.. they both have CT sounds mids and tweeters(CT Sounds is badass), however there are no separate tweeters in the mule lol..EITHER way they are both exquisite builds....
Hey man, your thoughts on infinite baffle for sound quality. Went through a few sub woofers on WINISD and the sub I’ve chosen should give 24mm Xmax at 1190 watts@ 20hz....think it will sound ok? Btw love your channel, kinda got me back into auto stereo’s. Also I tune fore living for high performance and I’d like to tune your truck if your interested
DOUG! your shit sir, cause of your shit my daughter keeps picking up almonds in the grocery store and screams out "DEEZ NUTZ"
s3rji0 apparently someone needs child censorship
Hahahahaah
I think Doug gets the W for that, that's funny as fuck
GOOD MORNING EVERYBODY!!!!!! 🙌🙌🙌🙌🙌
SoundmanCA you make my college days livable
Why not use blue loctite.
Why are you not sealing the truck box groves on the box?
Did you lube it before you stuck it n in the holes?
Burble, burble, burble Mornin'!
So much bass that frame will surely twist.
Well it's a Ford frame, so it probably will.
Private Shovel he should worry about the whole back of the cab rusting out since it's a ford and everything else lol
Hey hey hey at least it's not a Dodge
Dogurasu lol rusty Toyota is an oxymoron
Wow I've been in prison for the last 2 months n this box is still not finished and Installed DAMN!!! You taking your time son
Not that you care, but I like your music re-mix choices. Great videos. Thanks Doug
THANK YOU!!! :))))
Wow! The box looks amazing! It's been great watching this build.
Damn, the bedlined box looks slick as hell; that top lip is what really sets it off. Now, imagine how good the installation would look if the bed was bedlined to match!
Another great episode man! “Why don’t you shut the f$&@ up Doug?” kills me every time! And when the customer bell rings you instantly stop and you’re like “can I help you” cracks me up every time
Impressed that you still manage to come up with new Rafa's mom jokes every time.👏🏼👏🏼
Now you need to spray the bed liner in the back of your truck!
One of the rules of thumb is that there is enough space in front of the port from any walls or other objects and the minimum distance should be at least the diameter of the port. So putting those rear seats down or removing them would probably wake up the sub end of your system. The proximity to the rear seats will detune your ports. If say the port is 10in dia and you have a wall in front of it 5in away, the port will act like a longer port than calculated. If it is closer like it looks here, the pressures from the box will be impeded. Give it a try and test with seats up then down. There should be a noticeable difference. ;)
Mags
Nice box! Now you just need a flush mount tonneau cover, tinted windows, black 22's, cat-back exhaust, lowered rear suspension and take off the side steps 😅👍
let's all chip in a dollar to buy wishbone some cooler hubcaps
5:16 best shot in the whole RUclips series. Looking like Tom Cruise from mission impossible climbing through the air ducts
Came out great Doug. Are you going to bed liner the bed to match now? Would look sweet matched up.
Damn Dougie, the box looks FRESH!
Looking great! Don't forget to coat the sliders on the bottom of the box as they'll soak up the water that runs into the valleys. Not that it's due to rain for another 5 years , so I guess you just about have time :-) Looking forward to some Mule action, and no, I don't mean your evenings with Rafa's mom :P
he's going to replace the wood sliders with urethane. those are just placeholders for now
Ok you’re breaking my brain. I love the work Leo does over at Frog Leap Studios, and I just saw the acoustic version A-Ha did on mtv unplugged of Take on me...
Can we get a shot of the blow thru while bumpin? Looks great!
Doug is going take that box out maybe 40 more times before its done, its driving me crazy!
You have to spray the bed with the same stuff that's on the box, then it would look great! Then a fiberglass bed cover.
Looks real good with the bed liner! For security reasons see if you can get some wheel locks for the bolts that hold the box in🤔
Awesome build and I'm sure it bumps super hard in that truck. Keep up the awesome Work Doug I watch every time you upload
Damn........would you take $9,999,999.99? Lol. That setup is super sweet. Awesome show Doug!!!
FYI you can get the aluminum diamond plate hard anodized, or anodized in various colors. They also have it pre-powdercoated in various colors.
I know a guy that could anodize It after you cut it to fit. Could clean deez knucks up too. You must be looking to sandblast those by now. East coast though. Love the show Doug.
Just to be clear, Ii was saying it is available already anodized or coated with a factory finish. I would think your metal supplier should be able to source it.
www.cutsmetal.net/diamond-plate-sheets-colors/
diamondlifegear.com/diamond-plate-aluminum.htm
To be honest, it actually IS the best show I've seen. Coz the Sopranos ended 10 years ago...
Just a silly question maybe,just wandering why ppl put speaker wires thru the port?wouldn't they cause some noise in the port with wires moving
Just found this channel. Damn I’m hooked bro. Can’t wait to see the truck finished.
Chris Cunningham Well since you're new I'll let you in on a small secret... There is no "finished"
Doug your work is the best !!!!! You should sell custom boxes. Any suggestions on the best trunk box??
Manuel Martinez Dual Chamber 6th Order Bandpass.
Doug that's why I love you man you make the morning wake and bake f****** fun
Paint the back of the plexiglass where it's cut for the recess with black paint instead of polishing it. It's will look the same as polishing from the out side and the carriage bolts will blend in better too. Plus It will only take 3 episodes instead of 9. Lol. Looking great man!
WISHBONE IS BACK! remember him and that crack head with the Thunderbird from when you tried to make this shit a sitcom 😂
With the component speakers did you use the supplied crossover or are you using the audison ap. CT Sounds! Love it
I wouldn't paint the diamond plate gloss black Doug, i think it would reflect a lot of that Cali sun right into the cab and or your eyes if you need to look out the back window.
This guy I can tell is really so down to earth keep it up love you show
“Come back ALL week for a fresh new episode of Amplified” as in TUESDAY, Wednesday, Thursday, Friday?
You do have the best channel Doug
Hola soundman! I have a 2015 bmw 428i convertible. I also have a W7 13.5 AE that I need to fit inside this convertible. Any ideas....?
Awesome box build , except for one thing. You didn't Rhino line the rails that are touching the bed of the truck on the bottom of the box. Water is going to turn the MDF into loaf bread.
Did I hear him saying come back all week for videos? If so, rip it! Funny episode man.
What's up Doug, I was a little worried for a min. The Car Audio News Reporter (On my channel lol) said your explosions were at a all time low and you was being safe. In other words I gave you a shout out. Keep up the goods brother stop by when you can for some News 99% chance you will laugh your ass off :) :)
Happy Monday to you Doug .. great song from the 80's take on me . What's that device that you test and tune your systems with ?
Audison BitTune?
He uses a flying saucer. Not the frog penis like Rafa uses.. Got em
Was Wishbone workin for you when you have all your folks into your shop? And where did you find the accordion weatherstrip?
Looks really good. You do work hard. Spaceman very lazy, I would only want to install that box once. I think the wires deserve their own little port and blow-through, Capn'. For the new window, router-in small T-track slots on the edge, use black painted T-bots, and slide the window and bolts in as one piece, tighten from the inside. No more bolt heads sticking through. +10HP!!
I just want to see Doug build a 160db+ sound system that’s wild clean and can make people tap out
That box is a hernia waiting to happen. A beautiful, sexy hernia.
Does Doug have a favorite playlist that he is willing to share? I've heard some good beats on these vids.
@SOundmanca play some more from outside the truck. Maybe there will be less distortion?
Hey Doug, I wish i could get that deep into a box! You must have had lots of practice....
The box came out great 👍 good job Soundman 🔊🔊🔊😁✌️
You need to publish a user's manual for the sub box and specify the torque for each window nut
Hey Doug. Has anybody ever told you that the speaker wire your using is to small for that sub.lol.jkjk bud.Keep up the good work. The box is looking and sounding amazing. 👍💪
Wish I could afford the 10,000,000 doller sq lol
Great disign and sound.
Great work.
Come back all week long? Are you back to daily uploads, have my prayers to Rafa's mom's mighty crack been answered?
the mic picked up the bass inside the box pretty good
Sound deadening material!!!
I remember bumping that bass track about 15 years ago!
Did what's his face get at you yesterday, DEEZ NUTZ!!!! Glasses holder need a little 200mph tape, great vid
Are you going to spray the truck bed with the liner?
Are you painting the inside of the box??
That's a badass setup in a truck
Quote of the show, "whenever I change something it's different" lmfao duhhhhhhh....
I'm sure you've said something about doing something to the inside of the box, right? .. looks good though.
Doug how did you screw the w7 in with barley any space ???
Is be ling the truck bed next or get a carpet berliner so you could slide it out easier
No tomaste en cuenta que las guias de madera que le pusiste entre el cajon la batea cuando llueva van absorber agua!!!
y por ahi te puede hechar a perder el cajon no cres??
Saludos bro!!
you should put 2 metal handles on the top of the box so you don't hurt yourself. it would make it a lot easier to load and unload from the truck.
Time to sound deaden to roof
Seems like you have stepped your speed up since some people where calling you slow 😂🤔💯
All week?!?! Daily videos?!?!? please say yes...IGNITE MY FUMES!!!!!
Shits looking gravy baby.... "you 4gots the LED light strip"
Do you have the rear seats up or folded down and does it make any difference?
Anthony S. No it won’t make any difference with bass frequencies
You rock! Great Job man! Keep up the good work. I definately want to bring you my car to design some shtuff in the rear deck. I cant wait to see you make a video bout it. RockOn! Bless your b'ASS
that box is the shit .....well duh u made it lmao up the fine work Doug
Are you going to spray the bed liner in the bed of the truck
Hi I have one cvx 12 in my 2015 vw Jetta and I have hifonics Zeus 2400 amp with pioneer 2800bs stereo I don't know what mids to buy can u help me
Im new to systems and need some help, would a t line be better for sq compare to a 6th order?
Can't wait for the diamondplate!
What volt meter is that with a bass knob aswell that you are using.
Love this show.....keep doing wut ur doing cuz ur killing it!
Spray the inside of your bed with the same linner that would clean it up pretty good back there. Make it match that masterpiece of a box u built lol
Are you going to bedline the bed of the truck?
Just outta curiousity, did you talk with mark cardoza when you had offered them an ad spot on your channel?
Love your videos Dude! Don't change a thing (except we need some fresh Raffa Cussing again) :D
There's that gun with a scope silhouette again. LOL!!!
Line the truck box also, drill a few drain holes also
What system sounds better the mule or f-150
F150 by far if you're talking about the strength of the bass, either way he has the amazing $1000 Sony radio deck in the F150 which is the best SQ possibly really...on the other hand the mule has the PRICELESS Macintosh deck.. they both have CT sounds mids and tweeters(CT Sounds is badass), however there are no separate tweeters in the mule lol..EITHER way they are both exquisite builds....
+DeathLikeWebz the mule has Hybrid Audio speakers 😊
Hey @soundman why don't you bed line the bed of your truck also
Are u going to put new speakers in the rear doors
20 years later he's still working on the system in the F150. LoL
Oh great master Doug, can you tell us how you manage to sneak around youtubes copyright robots?
So who is the best USA made amps and speakers now?
If you were to raptor line the inside of the bed it would really add to the look.
Great job, pity the water has no rear run off, but hey.... 😎
it look great. but why do not has the high of the truck
Is there a reason why you ran the speaker wire like that ?
Hey man, your thoughts on infinite baffle for sound quality. Went through a few sub woofers on WINISD and the sub I’ve chosen should give 24mm Xmax at 1190 watts@ 20hz....think it will sound ok? Btw love your channel, kinda got me back into auto stereo’s. Also I tune fore living for high performance and I’d like to tune your truck if your interested
Sick Always wanted to do this to my truck
Your right this is my favorite tv show
keep up the great work
I'm surprised you didn't paint the inside of the box or did I miss why you didn't?