BLOW THROUGH subwoofer enclosure RAIN TEST! WILL IT SWELL?! - U-POL Raptor Liner - AMPLIFIED
HTML-код
- Опубликовано: 9 янв 2018
- Today I will check my blow through subwoofer enclosure after a full night of rain. Then I will revise some adjustments on my CNC router table and plasma table as I fulfill all the orders from my recent "practice projects". ALSO! Limited T-Shirts just came in!
I coated this box with U-POL Raptor bed liner - amzn.to/2Dih1ip
SOUNDMAN -------------- goo.gl/5Spv9g
CT SOUNDS --------------- goo.gl/NWNQlC
MOBILE SOLUTIONS --- goo.gl/iOqFBu
Xtreme Auto Sports ----- goo.gl/GvzsWm
Thank you for watching AMPLIFIED #702
Tune in everyday for non stop comedy, DIY fabrication and vehicle customization from award winning car audio installer Doug Bernards, Inventor of the patented iPad dash kit available at SoundmanCA.com. Авто/Мото
Amplified is the one show I look forward to everyday. Thank you Doug!
THANK YOU!! :))
EVERYDAY!!!!! Bring it back Doug. Box looks twisted.
I wish it was everyday!!! 💪😎
You must have your shop in a pretty nice area. In New Orleans, you'd come out in the morning to the whole truck bed being stolen if they couldn't get the sub box out.
Haha, you should make a little fish-shaped cutout thing to hang inside the box, just for the haters!
😝😝
It will look like the fish are swimming in that bitch when the bass hits.
A wet box & no Rafa's mom joke? You're slipping!
into her wet box? 0.0 LuL
Crash KDM He did manage to get an insertion joke in there though
Doug you need to start a new 'limited product' run to buy yourself a cover for the truck. Maybe you could do an image of the mule or an image of a blown voice coil out of MDF (or metal) and add some sort of comment to the design/detail (like "It's going to twist"). Installing the truck cover would give you some video content too (and based on the way we know you make videos, that's probably like 30 videos!! =)
I bet You. One day You will blow yourself up while recording and we all will think it's just an montage. xD
I love this channel. It always makes my days when it’s not going great. Keep up the good work
Great job Doug!!! You did it again, although it really doesn’t matter what you did, Doug. Keep up the good work.
LOL, remember old school Fish-man?? Every install had a fish tank in it HA!!
Show is always dope Doug. Not the best thing to watch while you're sick though. Almost coughed up a lung from laughing so much. Thanks again
I really liked to see ypou tinkering with the plasma cutter instead of just assuming your original settings were the best. Dope video.
You are genius having customers pay for your resurch & development (R&D). Great way to familiarize your self with your equipment.
It’s always easier to put your entire arm in once the box is nice and moist.
i love it its just amazing it looks so pretty in the rain so Glad u got the router and plasma cutter almost perfected now happy new year im really proud of how far we've all come (: been an epic 2017 and past few years
Good shyt as always...the explosion when ya started up the plasma got me lol!!!!
Explosions never get old 😂 or ive just smoked too much. Subbing!
Amplified always makes my day better!!!! Thanks Doug!!!!!!
You're the best on the internet, Doug.
Hahaha Ralphie in the beginning had me rollin with laughter!! 🤣🤣🤣 Hahaha Awesome!!
You should REALLY start making those ASMR videos! I'm watching with headphones on and these OOOOOHHH YEAHHH's get me every time. It sounds like you are talking straight in my ear!
Great show today Doug. I look forward to the Rafa mom jokes everyday. Keep up the good work bud
Keep up the good work keep up the laughter thank you you make my day
Why not install a tonneau cover?
Because they are fucking ugly and for old men with limp dicks. Facts.
Question how did you get your outside cut to the bed and the inside cut to the cab match??? I want to do a blow through on my 96 nissan hardbody but I want to do a big square hole. Don't know if you made a video on this when you did your truck. I've looked through your videos can't find one. Please your help would be GREATLY APPRECIATED. THANKS. love your channel!!!!!
I need help i bought a tropo 10 the manual says it recomended 1.5 to 1.25 qft ..i bought a ground shaker box thats 1.98 qft is it going to be ok or should i get a different or is ther a way i can reduce the air space
If you have settings for it speed up your feed rate in intricate areas on the plasma table. Should minimize too much burn out.
Where can I purchase a MDF ipad dash mount like you made in this video? I could only find the acrylic ones.
how do you cut out the suede backing for the ipad kits? do you have a die to press cut it or ???? TIA
Do you think it’s possible to fit a 13tw5 v2 Behind the seat of a super crew f150? I have the Sony system but I want something with a little more punch just don’t want to lose and space.
Hey Doug if you want to keep the consistency of the plasma after running so many pieces take the electrodes out and clean them with a wire brush to help the plasma and air go straight through without clogging the tips up it will help a lot and save you from running through a bunch of tips
Wet boxes are good for at least +3db. If you can get a pool on top of the box you can watch the sound waves when the bass hits! Something to keep Rafa's mom entertained...
I like the look of both of them
I like the way you twist the tip Doug
With a blow through how do you get it water tight with the flex from bed to cab ?
Doug, I dont have a cnc plasma but i do a lot of hand plasma cutting. i found the closest i can get without it grabbing the piece is always the cleanest. also slower isnt always better.
damn i thought you had it turned up already, i always use it on hi
SoundmanCA, I have a 2007 Escalade SUV. I want big bass, yes I realize the area is small keeping the third row seating. Suggestions?
Lovin the episodes mang!
can you use the spark plug gap tool for spacing?
Hey bud I'm trying to put a Samsung tab 10.1 in my 2002 Yukon Denali. Any advice. I wish you had a ez slider kit for it
New Order today.... Love the background music Doug e fresh
Legendary. Doug is the Last Dragon of car audio.
Got me laughing pretty good today Doug.
Hey Doug, I have a similar setup in my truck...I bought a cheap roll up cover. I also live in a lot different climate than where you are located.
The Box sounds better after getting wet? You had a dip at 60Hz if I remember correctly..the Box swelled, changed the volume of the ports/interior, and flattened the dip! Who knew swelling such a swell Box could work out so swell.
I much prefer the look of the outlined lettering on the oil pan plate to the complete cut-out, looks better, especially the letter "O" as there is uniformity with the other letters.
Damn Doug, you must have gotten some sleep because this one was an awesome episode. It was funny, you got shit done, and the music was on point. Keep it up bro. Loving the show. You should hit up Netflix and see if they'll give you a show.
you made the box so good
Would puttind a heatsink of sorts help out getting cleaner cut on the f's even say a block of aluminium or copper
I love your show.
I remember when someone actually walked in the shop while Doug was air humping a hose or something 😂 Shit was fucking hilarious, you could see how embarrassed he was haha.
I ended up having to redo my box out of fiber board. My gasket formed a little leak, and I started noticing odd shaped wood chips in my truck. It probably had nothing to do, with driving like a commando on unlevel terrain. Or the fact f250s are know to twist a little, if a wheel comes off the ground.
You Tha Man Soundman!!!!!
Lmao. The second you started talking about router safely i was like he's going to talk shit on mark and his push blocks haha haha!
awesome show today😎
Just can't get enough. Just can't get enough.
The Crushgroove I noticed it too lol
@soundmanca did you get my PM about CT sounds amps i won ?
Another awesome episode!
Just run the plasma at its highest amp and air pressure setting. We do the same thing in our shop all the time, leaves a nice clean backside ;)
Did you show in a previous video how u sealed the areas u ran wires thru? Which episode or can u discuss it? I'm having problems re sealing where my speaker wires enter my door after bodywork
Shawn Jones he runs them through the port
Were can I get a blowthrough box made
When is the 12.9 kit going to be back in stock? @soundmanca
hey Doug just an idea to further upgrade your sandblasting cabinet why not add in a blow gun in side the box to help contain the dust inside the cabinet, good to hear you don't have a fish tank like Raffa
😂😂😂 I needed that laugh at :51 seconds in “can I help you?” What was that crashing sound??? All I pictured was the customer tripping over shit, as he walked in the front door 😆😆 Crying over here!!! Thanks man 👏🏽👏🏽👏🏽
I'm a big fan of the Blue Monday playing in the background.
My Man Doug E Bernard Super Genius well I always a wet box is a good box! The plasma cut is looking clean. Hey Stay Eazy Bruh
Why havent you bought a tannoue cover or a cap of some sort for the bed of your truck? If I spent all that time and money on my box, and sub, and amp... I would try and protect it more. Like a guy said before me... Must live in a nice area. He was in new Orleans... I'm in south jersey
You use wonderful background musics.... V. Nice.... Love yaa
@ 21:02, what did you run short on the techflex Doug? Didn't think anyone would notice huh? lol
Oh!... I haven't trimmed the power cable to size yet because i plan on hiding a second fuse holder in the jack hardware cubby.
That's a swell box Doug keep it up
That's what Rafas mom said
Come on Doug! Let me get one of those placks!
Doug why don't you buy a tyger trifold cover for your bed /Ford son? I got 1 for my Tacoma for 235 bucks it's made pretty good and I recommend it. Cheers keeps Vlogs coming man!
You could bolt aluminum rails to the bottom of the box, their easy to shape. I wouldn't do anything with the top, no need to. Although a plasma cut diamond plate logo would be sick!
What's the bet it sounds better because of the colder day, the air will be more dense, so more air molecules for sound waves to vibrate.
A really good flap wheel on an angle grinder would clean those plates up very rapidly and give you a quality finish.
Love the show Doug
How do get theses plates my guy?
A fine grit flap disk on an angle grinder would make quick work of that cleanup on the metal plates. And it's much easier than using that bench grinder.
Slow the plasma down just a little. Always remember a wire wheel works wonders and when you really have those that stick, a grinding rock or flap disk.
You could sand the faces while they’re still on the router, I’ve found it to be easier.
Oh Great Beyondo!!! Is Doug going to start making subwoofer cabinet fish tanks now!?
I feel like a belt sander or even a belt sander attachment for your vench grinder would be faster on the cleaning up of the parta.
what song was playing at the end and who sang it?bad ass work as always doug.
Looking good on the plasma cuts Doug! cutting metal with electrified air is so fucking cool!
Just wanted to suggest some amplifier power input adapters from a guy called Jim's Machineworx he's got some dope looking offset 90 adapters that i'm looking at for my setup
I thought this episode was swell. Thanks Doug
Doug you should put an led fish in it for the haters. 🐠 Keep up the good work. Trying to convince one of my customers to commission me to build one. 😲 👍 👍
Dave fish man Rivera would approve of that wet box 👍🏻
Get a cement mixer and put all your small parts from the plasma table into it for a cpl hrs....slag will be removed and sharp edges knocked down.
Water cooled voice coils. Bazooka did that right??
Milton Hernandez yeah on their triangular subs
And the Mardi Gras series
Mate96 Rusendic right, in the mid to late 90's
How can I Build a Waterproof Subwoofer Box?
the mdf slats look swell
ROTFLMAO 😭😭😭😭😭 5:26 in DOUBLE BONUS “can I help you” 👏🏽
Are those knuckles legal in all 50 states?
try an angle grinder with a flapper wheel to clean up the plasma boogers....
Offcourse. . . . ✌✌👍👍🔥🔥
So does the dam thing glow in the dark or not?
You should put a tonneau cover on your truck
I fell out at 8:07. Those Fuck Offs are looking good too. Keep up the goods man :)
13:40 have same parts blaster. Don’t think it’s ever been used lol
Yup
Whats da neighbor up 2 wit dat tent set up?