You have to get the full stroke down and release cleanly for it to reset and engage again like it's designed to do. It takes a little practice for some folks. Most of the time they work flawlessly.
This $400 trigger literally works worse than my trigger that cost me 20. 3D printed trip arm and disconnector, $20 milspec burst trigger You could buy a 3D printer and make 10 of these for cheaper than this piece of crap
@@PEWPEWNATIONexact same red dot I have most likely. It tends to stray if you get off your line of sight. But it will definitely do the job for a few well placed shots.
@@PEWPEWNATION Thanks for the Information ! The reliability issue with most drums is why I ever really got excited with them and only currently own an AK one.
@@winkleried same here! I honestly hate drums. This is literally the only one I have ever had that ran great and wa seasy to load. Maybe I got lucky though. 🤷♂️
I don't want to mess mine up, I have a trigger, nib., but one gun Smith said it will blow up the scorpion. I've seen one video of out of battery discharge, gun was toast. But about 150 like this. Lol I will get mine installed. I guess I could drill the screw out, I think it has a dab of welding across.... impossible to get out without cutting/ drilling. Any tips, I'd appreciate.
@@PEWPEWNATION looked to me like it was jumping all over the place. But since you say you aren't shouldering it that would explain why. All Hail the ATF and thier stupidity 🙄
You are right! I use my cheek and less flop than that. Also work on the sequence, practice a tempo and you'll lose the sporadic double taps. Next time show the paper target lol
No its not full auto. No tax stamp. Basically you shoot a round when pulling the trigger back, then another when the trigger goes forward. So if youre really quick with the trigger you can almost ALMOST replicate full auto
100% legal and legit. Franklin Armory BFSiii CZ-C1 OR CZ-S1 (Curved or Straight). I have a straight on my AR-10. But would recommend curved if you're gonna use binary a lot. You ain't dumping off but so many .308 like that before it starts moon walking. 😂
Oh boy that’s 🔥 🔥. I think I need both of those.
same setup here suppressed
its a blast
That's the next thing is a suppressor for the Scorpion!!
I’m sure eventually you’ll get the option to choose M,F, Binary or “Sometimes Binary”
Sounds like it wasn't firing in binary for about half the time
It is very inconsistent unless it is perfectly clean.
@@PEWPEWNATION can go full auto with a lighter trigger bump firing
You have to get the full stroke down and release cleanly for it to reset and engage again like it's designed to do. It takes a little practice for some folks. Most of the time they work flawlessly.
@@PEWPEWNATIONwhat binary I know it Franklin but which one??
This $400 trigger literally works worse than my trigger that cost me 20.
3D printed trip arm and disconnector, $20 milspec burst trigger
You could buy a 3D printer and make 10 of these for cheaper than this piece of crap
Did any of y'all have to replace the bolt carrier or keep it original? And if you did did you do Nexus or Hyperion?
What optic do you have on it?
It is just an inexpensive Crimson Trace Red Dot.
@@PEWPEWNATIONexact same red dot I have most likely. It tends to stray if you get off your line of sight. But it will definitely do the job for a few well placed shots.
Please reply with any issues with magpul drum - thank you.
Have not had one yet.
You have straight or curved? I have a straight on my AR-10, but I'm thinking about going curved if i got one for a CZ.
My mag doesn’t fit is there something I did wrong or is the mag not compatible
I have one of these drums on order due to pissing of Gov't reasons. Does anybody know if they will reliably work with JHP loads ?
Honestly, this is the only drum I own that I have yet to have issues with. This thing seems to run everything flawlessly.
@@PEWPEWNATION Thanks for the Information ! The reliability issue with most drums is why I ever really got excited with them and only currently own an AK one.
@@winkleried same here! I honestly hate drums. This is literally the only one I have ever had that ran great and wa seasy to load. Maybe I got lucky though. 🤷♂️
@@PEWPEWNATION We will find out when mine arrives !
@winkleried how's your drum mag working out?? I've got a scorpion and if these drum mags actually f'ing WORK I'll buy one in a heartbeat!
I need that 50 drum and binary I added the Hb industry’s red extended charging handle and red trigger on mine with a vlife red dot sight
I just got the 3+ Micro I'd have to modify a drum mag
Scorpion Gang
What model drum mag is that?
It is the Magpul drum
So cute.
Now let's see the paper 😂 I wonder what rounds were on target 🎯
All of them. 😃
@@PEWPEWNATION 😂 That trigger is definitely on my list this summer!
@@jonellhaney7162 you better get it now... they just dropped 2 new ones... they sell out quick
How many rounds missed the target??
None.
@@PEWPEWNATION 🧢
Nice bro!!!!
Where did you get that drum mag from ?
Magpul
$50 per minute
Lol pretty much.
I mean, I love to shoot but I feel like there are things you could do that would be more fun and cost less than 50 round, binary trigger mag dumps...
We thought alike. Not counting what the trigger cost. Looks like (expensive) fun!
I don't want to mess mine up, I have a trigger, nib., but one gun Smith said it will blow up the scorpion.
I've seen one video of out of battery discharge, gun was toast. But about 150 like this. Lol
I will get mine installed. I guess I could drill the screw out, I think it has a dab of welding across.... impossible to get out without cutting/ drilling.
Any tips, I'd appreciate.
@@bradharvy13 well a year later, any issues with your trigger?
Trying to pull to fast just be consistent
I actually was pulling too hard.
It is a pretty light trigger all things considered. Even my AR-10 binary is pretty light. It does take a little getting used to.
Did he even hit the target?
Every round!
@@PEWPEWNATION on the edge of the paper
@@martinrps13 hey, the edge of paper is still paper. Lol 🤣
@@PEWPEWNATION film it again and display your results
@@martinrps13 I will add it to my list.
Lol you need to work on the recoil control dude…lol
How so? Gun stays flat the entire time. It is not shouldered because it is a brace. You are seeing movement on my cheek.
@@PEWPEWNATION looked to me like it was jumping all over the place. But since you say you aren't shouldering it that would explain why.
All Hail the ATF and thier stupidity 🙄
@@dustinanderson4809 100%. Got to love completely usless goverment.
You are right! I use my cheek and less flop than that. Also work on the sequence, practice a tempo and you'll lose the sporadic double taps. Next time show the paper target lol
@coyotes5504 it's all about smooth consist pull and release. You work your way up in speed. They are definitely awesome though.
Where did you find the magpul drum ?
www.notjustguns.com
@@PEWPEWNATION thanks
Sounds slow for binary
Sweet lol
Runolfsdottir Islands
Wtf is that supposed to mean?
Is that fully auto? And is it legal?
Did u need a tax stamp for it?
Binary trigger from Franklin Armory. 100% legal.
No its not full auto. No tax stamp. Basically you shoot a round when pulling the trigger back, then another when the trigger goes forward. So if youre really quick with the trigger you can almost ALMOST replicate full auto
it clearly says in the title and within the first 10 seconds of the video, that its a binary trigger. reading is fundamental.
Mmmmmmmm😩
I think yours is broken it’s literally a video of a little girl with faster trigger pull
Are these triggers legal
100% legal and legit. Franklin Armory BFSiii CZ-C1 OR CZ-S1 (Curved or Straight). I have a straight on my AR-10. But would recommend curved if you're gonna use binary a lot. You ain't dumping off but so many .308 like that before it starts moon walking. 😂