First rate video! I am a one man building crew so that tip on how to block up the sheathing so that it doesn't slide away is priceless. Your attention to details is first rate and so appreciated. Proper camera angles along with HD video just solidifies this video as a perfect ten. Thanks for sharing.
Thanks for all of your videos as these are my go-to's while I am building my 12x16 shed solo. All the jigs have helped immensely and after reviewing countless shed building videos on RUclips you are the most consistent and easiest to follow for the average homeowner. I even paid for a subscription to Fine Homebuilding videos and they show an over-engineered shed that most people will never build. Kudos again.
Your videos are top notch and I thank you for putting these together. I am building a 16 x 16 shed in my yard partly over a slope and your videos made it all possible!
I'm building a shed and have watched many videos on specific parts of building a shed and series videos. This series is about the best. For a non-trade person knowing what to do is of course important but very confusing is when to do those things, the sequence of the steps so you don't have to take apart something you installed later. I second all the positive comments below. Great video.
How wide over hangs would you build for a 12’Wx16’L shed? Would you still do 11” wide over hangs? I am currently following this video series to build a 12’x16’ shed for my tractor
Hello Henry, Enjoying your videos. You've put together some great building tips and first rate safty factors ..and those rafter miters are awesome.. Thanks for sharing and taking the time to educate.
Thank you for another great video. You're my new best friend. If you get a minute I was wondering if 3/8 cdx would be ok for the sheathing. With this doggone virus, the price of wood is pretty high right now and I'm on a limited budget. Here in Michigan the 3/8 cdx and 7/16 osb are the same price right now. I just have more confidence in 0lywood bug can't afford to go to the thicker cdx right now. Thank you again for these really great videos
Hi Random Guy... Ya, lumber, plywood and OSB here in BC is almost 2.5x more expensive than 4 months ago - 8' 2x4 was $3.50 4 months ago, now $8, OSB $32 a sheet for 7/16" !! - crazy expensive. If it was me I would change things up so the CDX is typical sheathing and then later when prices come down I would clad the shed with a better material over the CDX when the prices come down (and they will eventually). Yes, in the overall picture it is more material, but in the meantime you get the shed done and closed in and can do the finished exterior when budget and prices allows. And, it will be much stronger :-) Success with your shed build!
@@Countrylifeprojects thank you sir for taking the time to answer me and thank you for your videos. I'm an old man and pretty crippled up but your videos have helped me through the entire build. I'm slow but I'm getting it done. I'm thankful to The Lord for this warm up here in Michigan thumb. I think I'll beat the snow. Take care and God bless you for helping all us DIY people. It's a great thing you're doing.
I would vent the roof irregardless of whether or not you insulate. I gets real warm in my shed during the summer with no openings and the soffit vents are not enough.
Hi Musashi... this particular shed design is not intended to be used with gutters. You would need to change the rafter ends and fascia boards to a plumb cut which is much different than shown in the videos or plans.
I want to become a carpenter. I want to start by buildings roofs and overhangs. Please create playlists to teach us how to do it from the beginning to the complex. Thank you for your excellent videos.
Hi Joni... for the roof sheathing yes 1.5" and yes if you have deck screws on hand they will be fine. I typically like the screws I use to be 3x the thickness of the material being applied - so 1/2" I would use 1.5". If using glue (e.g. sub-floor, then I may opt for a little less, but not much. GRK Structural Screws - They may be pricey, but I love them, they screw in nicely and hold extremely well - one of my favorites when I really want material to suck in tight to other materials - especially for structural work.
@@Countrylifeprojects Thanks for Reply - i will also go For GRK much Stronger and less Brittle .wiil Continue on Sheathing and installing Rood Structure in Winter , Toronto , Canada
Depends on the application - floor or roof. Generally 1 1/2" countersunk 1/8" +- would be fine for 5/8" plywood. Ideally 1 3/4" would be better. You can also use 2" or 2 1/4" spiral or ring nails.
Hi Joe... yes for these videos I did as the sheds are small. Mainly so the average DIY'er with minimal tools could use the videos to build a good quality shed. However, for larger structures nails have there place especially for shear strength and other structural considerations. So, if you have an framing nailer etc, by all means use nails. If not, screws and glue (where needed) work fine for these small sheds.
Hi Bruce... I personally would not use 3/8" OSB for roof sheathing as I feel there is too much flex between the truss rafters (especially 24" centers) and may cause damage to the roof shingles if you walk on the them later. Some builders would feel it is fine and it saves a little money, but I personally stick to a minimum of 7/16" +.
+Ernie Zamora Hi Ernie... Personally the minimum I will use on a roof is 7/16". However, 3/8 can be used but I recommend using H-clips if you have any joints spanning the framing. It is after all a playhouse. If there is chance that kids can get on the roof then I would use 7/16" or 1/2".
Thanks alot for thr advise im learning so much by looking your videos im going to intall 1/2 im about to add the latter top in doing averything boy my self is my first time As soon as i finish i will send you. Some l Pictures of the playhouse....
This series is making it possible for me to feel comfortable to tackle building a 12x16 workshop.
First rate video! I am a one man building crew so that tip on how to block up the sheathing so that it doesn't slide away is priceless. Your attention to details is first rate and so appreciated. Proper camera angles along with HD video just solidifies this video as a perfect ten. Thanks for sharing.
Thanks for all of your videos as these are my go-to's while I am building my 12x16 shed solo. All the jigs have helped immensely and after reviewing countless shed building videos on RUclips you are the most consistent and easiest to follow for the average homeowner. I even paid for a subscription to Fine Homebuilding videos and they show an over-engineered shed that most people will never build. Kudos again.
Your videos are top notch and I thank you for putting these together. I am building a 16 x 16 shed in my yard partly over a slope and your videos made it all possible!
I'm building a shed and have watched many videos on specific parts of building a shed and series videos. This series is about the best. For a non-trade person knowing what to do is of course important but very confusing is when to do those things, the sequence of the steps so you don't have to take apart something you installed later. I second all the positive comments below. Great video.
That's certainly one huge advantage of screws it's easier to fix errors. With nails the wood is often destroyed trying to take them out
Amazing videos . Great contribution to society. Thank-you for these videos.
Great! I learned a ton in only 9 minutes- thanks for being so concise!
Great videos and information , I think I am going to start building sheds for all my neighbors..
I wish I had re-watched this video before starting last weekend!
Great idea using blocking to prevent the boards from sliding off prior to them being nailed down.
Beautiful job. I want to fix my small shed and with your videos it looks much easy
I like the blocking idea...it makes a perfect place to rest your tools too.
Too bad all DIY videos are not like this, superior!
I've been building a 10x12 right along with these awesome videos. Thank you!
good point on plywood writing down
How wide over hangs would you build for a 12’Wx16’L shed? Would you still do 11” wide over hangs?
I am currently following this video series to build a 12’x16’ shed for my tractor
Hello Henry, Enjoying your videos. You've put together some great building tips and first rate safty factors ..and those rafter miters are awesome.. Thanks for sharing and taking the time to educate.
+tom lancaster No prob... glad you liked the videos and tips.
You have wonderful informative videos. Thank you very much!
Very professional.
Thank you for another great video. You're my new best friend. If you get a minute I was wondering if 3/8 cdx would be ok for the sheathing. With this doggone virus, the price of wood is pretty high right now and I'm on a limited budget. Here in Michigan the 3/8 cdx and 7/16 osb are the same price right now. I just have more confidence in 0lywood bug can't afford to go to the thicker cdx right now. Thank you again for these really great videos
Hi Random Guy... Ya, lumber, plywood and OSB here in BC is almost 2.5x more expensive than 4 months ago - 8' 2x4 was $3.50 4 months ago, now $8, OSB $32 a sheet for 7/16" !! - crazy expensive.
If it was me I would change things up so the CDX is typical sheathing and then later when prices come down I would clad the shed with a better material over the CDX when the prices come down (and they will eventually). Yes, in the overall picture it is more material, but in the meantime you get the shed done and closed in and can do the finished exterior when budget and prices allows. And, it will be much stronger :-)
Success with your shed build!
@@Countrylifeprojects thank you sir for taking the time to answer me and thank you for your videos. I'm an old man and pretty crippled up but your videos have helped me through the entire build. I'm slow but I'm getting it done. I'm thankful to The Lord for this warm up here in Michigan thumb. I think I'll beat the snow. Take care and God bless you for helping all us DIY people. It's a great thing you're doing.
@@nobodyspecial6513 hope you got your shed done .Best wishes from Ireland 🇮🇪
I would vent the roof irregardless of whether or not you insulate. I gets real warm in my shed during the summer with no openings and the soffit vents are not enough.
Great video. Thanks.
One question:
If you were putting a rain gutter, how much plywood would you leave passing the fascia?
Hi Musashi... this particular shed design is not intended to be used with gutters. You would need to change the rafter ends and fascia boards to a plumb cut which is much different than shown in the videos or plans.
Henry, is it better to add PL400 to the rafters prior to putting on the roof sheathing?
Hi Jim... sorry for the delay. Typically you don't use glue on the sheathing for the roof. It would get messy very quickly and is not required.
I want to become a carpenter.
I want to start by buildings roofs and overhangs.
Please create playlists to teach us how to do it from the beginning to the complex.
Thank you for your excellent videos.
Greetings!!! Great video!!, I was wondering if you need to also put H clips on the vertical side of the plywood?
Hi CJmeza... If you are referring to the ends of plywood sheets, the answer is no as these joints should be on a truss (2x4 rafter).
Good Video
what size of SCREW ? #8 Robertson about 1 1/2" Long ? DECK SCREWS OK
How about GRK Structural Screws ???
Hi Joni... for the roof sheathing yes 1.5" and yes if you have deck screws on hand they will be fine. I typically like the screws I use to be 3x the thickness of the material being applied - so 1/2" I would use 1.5". If using glue (e.g. sub-floor, then I may opt for a little less, but not much. GRK Structural Screws - They may be pricey, but I love them, they screw in nicely and hold extremely well - one of my favorites when I really want material to suck in tight to other materials - especially for structural work.
@@Countrylifeprojects Thanks for Reply - i will also go For GRK much Stronger and less Brittle .wiil Continue on Sheathing and installing Rood Structure in Winter , Toronto , Canada
wonderful
What screws do you need for those plywood?
Regular #8 construction screws for the roof sheathing. Length should be minimum 3 x thickness of the plywood.
What kinda screws wood you us for 5/8 plywood
Depends on the application - floor or roof. Generally 1 1/2" countersunk 1/8" +- would be fine for 5/8" plywood. Ideally 1 3/4" would be better. You can also use 2" or 2 1/4" spiral or ring nails.
nice video im building a playhouse by my self and I got 3/8 plywood can I used for my roof my stud frame roof is 24 inches thanks
why is it a good idea to pair up the screws?
Wood will always cup, twist or warp if not secured properly. Pairing up screws or nails keeps boards from lifting on either edge.
my playhouse is 8x6 ...4/12 pitch
I noticed you use screws almost everywhere. what are the pros and cons vs using nails?
Hi Joe... yes for these videos I did as the sheds are small. Mainly so the average DIY'er with minimal tools could use the videos to build a good quality shed. However, for larger structures nails have there place especially for shear strength and other structural considerations. So, if you have an framing nailer etc, by all means use nails. If not, screws and glue (where needed) work fine for these small sheds.
Can I use 3/8 OSB on the roof?
Hi Bruce... I personally would not use 3/8" OSB for roof sheathing as I feel there is too much flex between the truss rafters (especially 24" centers) and may cause damage to the roof shingles if you walk on the them later. Some builders would feel it is fine and it saves a little money, but I personally stick to a minimum of 7/16" +.
great video,,
where to get the H-clips..does Homedepot or Lowes sell them?..thank you kindly.
Any building store should have them - they are very common. Make sure to get the correct ones for the thickness of your roof sheathing.
thank you
What u use for spacing?
1/8"
I enjoy these videos very much. But how many dewalt batteries do you own? And this shed must have cost you 200 bucks in screws lol.
can I be able to used 3/8 playwood thickness on my roof for shingles?,,,thanks
+Ernie Zamora Hi Ernie... Personally the minimum I will use on a roof is 7/16". However, 3/8 can be used but I recommend using H-clips if you have any joints spanning the framing. It is after all a playhouse. If there is chance that kids can get on the roof then I would use 7/16" or 1/2".
Thanks alot for thr advise im learning so much by looking your videos im going to intall 1/2 im about to add the latter top in doing averything boy my self is my first time As soon as i finish i will send you. Some l
Pictures of the playhouse....
If you have any kind of snow load you better go thicker