If you have a DDR5 motherboard, make sure that the RAM sticks you have are on the QVL (approved RAM) list for your motherboard! Or you may run into some instability. For all DDR4 setups, I would highly recommend enabling it so you can get the most out of your RAM sticks! In this case, I went from 2667mhz to 3600mhz, so the PC will run faster. Thanks for your support! Danny
@@King_Dumpling24 depend on motherboard. Just look up "how to access BIOS" for your PC if not sure and it will show you the different possible keys to press during start up.
Thanks for adding this. A few weeks ago i built a new pc with ddr5 and when i activated EXPO (the amd version of XMP for everyone who doesnt know) and i instantly noticed performance and stability issues. Also my boot time went from 13 seconds to 1 1/2 minutes. If you are having issues like that go back into bios and disable it. If it takes waaaay to long to even get into bios you can disconnect your pc from the outlet and take out the cmos battery to reset your bios to default settings
@@Voxel_444 thats every bios my guy. Only touch things you know you should. If your following instructions on how to do something you should be fine. I have the same bios as the video, and its just as hard and clunky to navigate as the og blue one. Sometimes even more. Literally no difference.
@@godzilla928because the start up options as he called is the recovery mode and to get there the windows is doing a restart, at which point you could already access the bios, before he boots back into recovery, after choosing the point the recovery mode does a restart with a forced bios load. It is useful if you have fast boot on and can't access the bios with key press anymore though.
Just bought a second monitor with my best friend for his setup. He always wants more Hz over better quality. So we bought him another 144hz monitor. He has his setup for about 6 months. As he basically knows nothing about pc building I was sure for pretty much the whole time he has his setup, that it is not properly set up. And what's the first thing I checked? Ok f course l. His resolution and hz. And like I expected, 30hz 😂😂
This was me!!!! I thought I had a shitty 1080p monitor. Turns out it went to 244. The difference was night and day!! The first thing I noticed the cursor was extremely smooth and my games fps went past 60fps!
Word of advice. Make sure not only your mainboard supports your ram frequency but also your CPU memory controller. Take it from someone who has had system instability issues for 8 years due to overlooking that the CPU could not stably run the XMP frequencies of my RAM. Once I turned off XMP the ram frequency went back to a supported one and now the system is stable for the first time ever!
Bro you just solved a long standing issue for me. Well you didn't solve it but you made me understand why it happens. I'll solve it by upgrading my cpu!
I had the same issues, I just overclock the CPU and GPU, no point in turning on XMP and overclocking my ram for minimal performance increase at the cost of stability. If it that's important I'd just buy more ram/faster frequency ram, especially since it's so cheap nowadays.
when I first built my pc in 2023 I realized that my cpu was being less powerful as advertised and then I researched about this problem and this was the solution. Thank you for showing other PC builders this ❤
Happened to me. Custom built from large gaming company. Had it for a long time, did not cause problems until I upgraded the GPU. Then the cpu thermal throttled like a crazy monkey!! That's how I found out, during change of thermal paste. I was shocked! Got a pretty sweet deal from them and upgraded to 7800x3d and a new rig. They were PRETTY embarrassed. Also removed the plastic on the old Intel one and added new paste...seems to have survived the looong time of cooking 😊
if i didnt build my pc with my brother i would have made that mistake XD as im about to put the cooler down on the cpu he was like " im sure you know what you are doing but is that plastic supposed to be on there still " and i just laughed and said forget everything you just saw
@@c4n0 apps is short for application not an apple standard. I don't get why do people yap stuff without knowing or confirming their knowledge. Programs and applications both are different things.
Doing my first build since 2011... figured it was time to upgrade. Hopefully my mobo comes with a paper manual, so that I don't have to learn everything from youtube shorts. I will be reading on xmp though, thanks for the tip.
I feel like Theres so much in building a pc yet you can make it look so simple in your shorts… could you perhaps do a full length video at some point! Love the videos man!
Look simple because it is. just read the manual that comes with the motherboard. Who would have guessed reading the instructions is the solution to avoid these missteps. We don't need more RUclips build guides your motherboard manual already has a board specific one that reminds you to enable xmp or take the sticker off the heatsink
Dude. I’ve been having issues with streaming lately and for the life of me couldn’t figure out why. Saw this and o thought “what the heck I’ll check” and this was it! Turns out at some point when messing around with bios It must have reset and I didn’t realize! So so grateful! Now if only I could fix the issues with my gaming and streaming skills 😅
Your videos are excellent and very accurate. In 2017, I built my first gaming PC and have learned a lot since then. All my colleagues ask me for advice when they need help with PCs.
I thought it was gonna be a "Remove before instillation" gag about one of those bits of plastic that melts into the motherboard if you can't read while building it lmao.
Banana key caps Idk if keyboards come with those keys but there are like a trillion different key caps with unique sounds. I know he uses banana caps because he mentioned it in a short
I know about PCs but I am still not sure I know what to do after building it, like Enable Xmp, download drivers, bios, programes, Benchmarks but I still feel like I am missing something
you dont have to enable xmp, it increases performance but can reduce life span of your computer. Unless you are gonna run high end apps like games that need big amounts of fast ram then enabling it would be a good option
None of this is necessary and it's silly if you care to enable xmp for performance, then go with bloatware like windows. It's like putting a supercharger in your Honda 2000, and then throwing 10 45lb plates in the trunk for stability.
There's this company called aftershock PC,they are a pc company in Singapore that build PC's,they mostly ship locally but if you want the m to ship overseas,you may have to personally contact them
Not really, once you watch some videos you'll get an idea of what to do. I built mine recently and I have to say, it was pretty straight forward. Getting your PC setup after installing all of the parts can be tricky though
Nope, but they do take a lot of research in understanding what is compatible. There are lots of resources online to help. Best way to learn is to watch build video tutorials.
They are pretty self explanatory, you just lock your parts into place in the motherboard. Don’t stress over putting in your graphics card, it’s easier than you think.
I helped a co-worker build his pc, and he had already set the ram, and some other stuff, just needed help with fans, hard drives, and water cooler. Also helped him with setting up windows and drivers, programs, etc. I couldn't get past the windows half way install, turns out he had 2 different types of ram speeds...wasted like an hour or more.
DUDE !!! you made my day.... i have a custom build pc from a well recommended factory nearby.... a lot of friends and family members had build their PC there..all well satisfied.... so do i ! in my build which is now 2 years old, i have 2x8GB @ 3200mhz RAM, and after your short video, i thought,let me look in bios like you did...and what must i see ??? WTF.... my RAM is running @2300Mhz ! i was robbed by 900Mhz for 2 Years !! did i noticed it.... Nope...... but i payed for 3200 ! so i changed the settings and run now on 3200 Mhz. Thx a lot buddy !
Funny thing with me building my PC, is a did everything perfectly, got all the correct parts, all the updates, setups and drivers all good, and it kept killing the power to avoid overheating…turns out its cause I put the fans on the wrong way and they were blowing all the air into the case and not out of it 💀
Though it IS recommended that when you build a new PC to leave XMP off while you install windows, and set it up.. once it's ready, then enable XMP since in some cases XMP can cause issues when installing an OS since it's considered an overclock.
People, if you're using windows also make sure you turn off windows fast boot. The fast boot feature makes it so the PC will never actually fully shut down, this can cause problems with certain drivers and programs, it could also slow down your pc. I did this on all windows machines I have had my hands on. I found that turning it off will cost 7 seconds on avarage in boot times.
If you have a DDR5 motherboard, make sure that the RAM sticks you have are on the QVL (approved RAM) list for your motherboard! Or you may run into some instability. For all DDR4 setups, I would highly recommend enabling it so you can get the most out of your RAM sticks! In this case, I went from 2667mhz to 3600mhz, so the PC will run faster.
Thanks for your support!
Danny
I once enabled XMP but I think my PC ran worse than before, my RDR2 started constantly crushing. Any ideas why?
What key did y ok press I have a 60% keyboard
@@King_Dumpling24 depend on motherboard. Just look up "how to access BIOS" for your PC if not sure and it will show you the different possible keys to press during start up.
What about ddr2
Thanks for adding this. A few weeks ago i built a new pc with ddr5 and when i activated EXPO (the amd version of XMP for everyone who doesnt know) and i instantly noticed performance and stability issues. Also my boot time went from 13 seconds to 1 1/2 minutes. If you are having issues like that go back into bios and disable it. If it takes waaaay to long to even get into bios you can disconnect your pc from the outlet and take out the cmos battery to reset your bios to default settings
I’m glad you didn’t show him downloading more ram. Gotta keep that website a secret.
Only the wise know
I need to know how to download ram ? @@DanKamYouKnow
It’s a old scam, ram is a physical part in your computer lol
No shit @@Altom12
@@Altom12wait, really?
Forgetting to set monitor refresh rate to the highest is also a rookie mistake
I literally said XMP and refresh rate out loud waiting for the end
@@sierra7534same
Always make sure it isn’t 60
Don’t forget enhanced pointer precision
@@swampfoxky1187the what
Bros keyboard sounds like my back in the morning
🤣
Frrr💀🙏😭
That keyboard was from the 1800s. Easily.
Dwarves are masterful craftsmen
This shouldn't be as funny as it is.
When I first started building PCs, bios looked like a NASA control panel. Now I realize it's very simple and streamlined
Pretty much!
My laptop still has that bluescreen like ui as the bios ;-;
Only difference is the colour and being able to use your mouse, not really a problem imo @@Voxel_444
@just_HAZEN feels hard to navigate, and it gives more feelings that a slight mistake will completely break my laptop
@@Voxel_444 thats every bios my guy. Only touch things you know you should. If your following instructions on how to do something you should be fine. I have the same bios as the video, and its just as hard and clunky to navigate as the og blue one. Sometimes even more. Literally no difference.
Didn't know watching Kratos build a PC was what I needed at 2 am
same but 2 27am hits good
The "THOCKITY THOCK THOCK" sounds amazing
Glad to hear kratos giving useful pc tips after retiring from Ragnarok
Fr ❤❤
_😂_
Indeed
😂
@@srinivaschilakala216 why tf is your emoji tilted ?
As a 1st time PC builder, I really appreciate these shorts! Thank you very much!
Glad you like them!
hi
me with ddr3 8gb and 1066mhz...
Remember bro to download more ram
@@muhammadbilal-jg4gr I just downloaded 2 terabytes of RAM, thanks!
the LZMFG shirt. a man of culture
Hell yeah I'm glad someone else noticed it
Bro the face when he told to download more ram is absolutely relatable
Fun fact hold shift and click restart. It’ll bring you to start up options where you can simply click UEFI Bios
shutdown -r -t 00 -fw
its quicker to not do that lmao
was about to comment the exact same thing
@@cyberturkey77 why
@@godzilla928because the start up options as he called is the recovery mode and to get there the windows is doing a restart, at which point you could already access the bios, before he boots back into recovery, after choosing the point the recovery mode does a restart with a forced bios load.
It is useful if you have fast boot on and can't access the bios with key press anymore though.
Love how you are the most chill pearson I've ever seen.
❤️❤️❤️
Pearson 🍐 lol dumb-bass
Better than me pulling the IO shield out of the bottom of the box after I had the entire PC assembled and running
The second mistake is realizing your 144hz monitor has been on 60hz the entire time 🙃
Or your 4090 paired with a 60hz monitor
Exactly 😂
Just bought a second monitor with my best friend for his setup. He always wants more Hz over better quality. So we bought him another 144hz monitor. He has his setup for about 6 months. As he basically knows nothing about pc building I was sure for pretty much the whole time he has his setup, that it is not properly set up. And what's the first thing I checked? Ok f course l. His resolution and hz. And like I expected, 30hz 😂😂
This was me!!!! I thought I had a shitty 1080p monitor. Turns out it went to 244. The difference was night and day!! The first thing I noticed the cursor was extremely smooth and my games fps went past 60fps!
i try to guess the problem before it's shown in the video, and that was my guess 😂 i spent almost a year at 60hz instead of 144 :p
And for AMD chips, most of the time its D.O.C.P instead of X.M.P
Or EXPO as well
No such option on AM4
only on am5 asus boards
It shows up as xmp on my am4 motherboard lol
@@zues121510same
Thanks Kratos, for sharing this information
The face at the end is legendary! 🤣🤣🤣🤣
Word of advice. Make sure not only your mainboard supports your ram frequency but also your CPU memory controller. Take it from someone who has had system instability issues for 8 years due to overlooking that the CPU could not stably run the XMP frequencies of my RAM. Once I turned off XMP the ram frequency went back to a supported one and now the system is stable for the first time ever!
Bro you just solved a long standing issue for me. Well you didn't solve it but you made me understand why it happens. I'll solve it by upgrading my cpu!
I had the same issues, I just overclock the CPU and GPU, no point in turning on XMP and overclocking my ram for minimal performance increase at the cost of stability. If it that's important I'd just buy more ram/faster frequency ram, especially since it's so cheap nowadays.
Same xmp was a opp for me
Yup, had issues for years till I turned xmp off with no noticeable impact in performance.
same for me i enabled XMP a year ago and had issues and problems deactivate it and now it runs smooth aigan
That keyboard at the beginning sounds awesome
I was lowkey gooning
@@thoccult well is it regular or custom
sounds like my razor huntsman mini
It looks like a keychron q1 max
Yep, q1 max
when I first built my pc in 2023 I realized that my cpu was being less powerful as advertised and then I researched about this problem and this was the solution. Thank you for showing other PC builders this ❤
I dont understand any of these videos but i just keep watching
Fun tip, hold down the shift key when you press restart. This way, can you navigate to the UEFI bios without having to button mash
But button mashing and hoping you get it is the fun part
@@Fofo-sr2xu This.
I absolutly love the sound of that creamy brown switch (i think) keyboard
Last time I built a PC it was 2013. Finally building a new one and there's so much new technology I didn't know about...
no shit
U are going to get a mil subs im sure of it
Appreciate that!!!
@@DanKamYouKnow Your videos suck
@@DanKamYouKnow sir what was the key you were pressing for bios settiings???
that typing sound in the beginning was so fine 👌
For reals, I wanna know what keyboard or kit is
You guys are doing gods work making pc building seem complicated so all the nerds can be pleased with themselves.
I've been running my 3200mhz ram without this for like 5 years and had no clue :,) thank you
i see that LZMFG shirt. hell yeah, didn’t expect you to also be a car guy
I was a mechanic/line tech for almost 15 years 😎
@@DanKamYouKnow That explains the wrenches you used in your other shorts
Most wholesome PC builder
I dont know why but i love hearing this man talk seems very calming
Damn I didn't knew Kratos was a PC gamer. : 3
That last frame. Hilarious. 🤌
Ong your keyboard is straight from heaven
Forgot to mention peeling off the plastic of the cpu cooler
Still need to do a video on that.
Eh I think you're a pretty ignorant person if you forget about that, no offense
Happened to me. Custom built from large gaming company. Had it for a long time, did not cause problems until I upgraded the GPU. Then the cpu thermal throttled like a crazy monkey!! That's how I found out, during change of thermal paste. I was shocked! Got a pretty sweet deal from them and upgraded to 7800x3d and a new rig. They were PRETTY embarrassed. Also removed the plastic on the old Intel one and added new paste...seems to have survived the looong time of cooking 😊
if i didnt build my pc with my brother i would have made that mistake XD as im about to put the cooler down on the cpu he was like " im sure you know what you are doing but is that plastic supposed to be on there still " and i just laughed and said forget everything you just saw
Ram being in the wrong slot is the most common mistake I have seen.
GAH DAMN WHAT IS THAT KEYBOARD IT SOUNDS HEAVENLY
The fact that I could anticipate what was forgot :D
Man, hearing programs being called "programs" and not "apps"
I’m old so I still say programs 🥺
Apps are for the phone.
We're original and down to earth here!
Programs and applications (apps) are two different things not the one and the same.
apps its an apple merchandising therm, programs is the natural standard
@@c4n0 apps is short for application not an apple standard. I don't get why do people yap stuff without knowing or confirming their knowledge.
Programs and applications both are different things.
"you look like a calm and reasonable person...."
-THOR.
Doing my first build since 2011... figured it was time to upgrade. Hopefully my mobo comes with a paper manual, so that I don't have to learn everything from youtube shorts. I will be reading on xmp though, thanks for the tip.
I'm convinced this guy is ETA Prime, he's got the same exact voice
Nice entertaining content. Keep it up!
Appreciate it!
IS THE A COFFEE MUG HOLDER(DVD DRIVE) INSTALLED
I feel like Theres so much in building a pc yet you can make it look so simple in your shorts… could you perhaps do a full length video at some point! Love the videos man!
Austin Evans does videos like that almost exclusively.
Look simple because it is. just read the manual that comes with the motherboard. Who would have guessed reading the instructions is the solution to avoid these missteps. We don't need more RUclips build guides your motherboard manual already has a board specific one that reminds you to enable xmp or take the sticker off the heatsink
@@over9000optimally I would recommend linus or LTT, Austin Evans has a ear piercing voice and I just find him, rather annoying to be honest.
I think it's a great tip to also change your windows pagefile to your fastest disk!
Bro in the first picture looks like kratos without the red line
Dude. I’ve been having issues with streaming lately and for the life of me couldn’t figure out why. Saw this and o thought “what the heck I’ll check” and this was it! Turns out at some point when messing around with bios It must have reset and I didn’t realize! So so grateful!
Now if only I could fix the issues with my gaming and streaming skills 😅
If your bios reset, It’s probably your cmos battery. Go ahead and give that a replace then apply your bios settings again.
For a sec I thought it was Kratos , 😅😅
The cheesiness of this
Your beard is a pretty good place for the subtitles to sit in
bro what switches are those they sound so good!!!!
Honestly bro😊
they sound like ceramic, i could be wrong though
jk i confused keycaps with switches
Don't forget about resizable BAR support! Especially if you have both AMD CPU and GPU
I got my gaming pc in December of 2022 and never had this on. Thanks for helping lol.
That twist 😂
Your videos are excellent and very accurate. In 2017, I built my first gaming PC and have learned a lot since then. All my colleagues ask me for advice when they need help with PCs.
Can we just all appreciate how good his keyboard sounds?
my question is why does it look like a keyboard from the 80s
Nah i hate those annoying clocking sounds instead of hearing the game sounds
This is so chill in an awesome way
I thought it was gonna be a "Remove before instillation" gag about one of those bits of plastic that melts into the motherboard if you can't read while building it lmao.
Your keyboard sounds so gooooood what is it?
It’s keyboard app makes your board sound like that and simple download is all that’s needed 😎🤙🏾
@@mbf6160you’re wrong
His keyboard is a wooting keyboard
Hey i have a question im wondering what keyboard do u have cause it sounds real good
Banana key caps
Idk if keyboards come with those keys but there are like a trillion different key caps with unique sounds. I know he uses banana caps because he mentioned it in a short
thank u@@user-hc5xt2hc9n
@@user-hc5xt2hc9n banana splits* (switches)
that face at the end is priceless
Also, "Above 4G Decoding" and "Resizable BAR"/"SAM" would be a good hint to explain for a lot of builds.
I know about PCs but I am still not sure I know what to do after building it, like Enable Xmp, download drivers, bios, programes, Benchmarks but I still feel like I am missing something
Install OS ;)
@@Halsafe I don't think I would reach as far as downloading programs without OS 😂
you dont have to enable xmp, it increases performance but can reduce life span of your computer. Unless you are gonna run high end apps like games that need big amounts of fast ram then enabling it would be a good option
In fact the xmp profile for my PC was enabled to a profile that caused my PC to crash due to the oc.
None of this is necessary and it's silly if you care to enable xmp for performance, then go with bloatware like windows.
It's like putting a supercharger in your Honda 2000, and then throwing 10 45lb plates in the trunk for stability.
What pre built pc should I get with a budget of 850$?
Id try asking round on Reddit forums and even though it's technically out of your budget fair warning I've heard bad things bout buildredux
There's this company called aftershock PC,they are a pc company in Singapore that build PC's,they mostly ship locally but if you want the m to ship overseas,you may have to personally contact them
Check Jawa out
I'd build one if I were u
As @@garbagepotato said that is the best option if you want to squeeze the most outta of your budget if your not sure about parts check out r/buildapc
Please make a full length video about absolutely everything you need to do after the build. You keep showing me new things 😭
The hardest part of downloading RAM is getting the sheep to fit in the case.
Are pcs hard to build?
Do you have time and patience? I don't so it's rather difficult for me .
Not really, once you watch some videos you'll get an idea of what to do. I built mine recently and I have to say, it was pretty straight forward. Getting your PC setup after installing all of the parts can be tricky though
Nope, but they do take a lot of research in understanding what is compatible. There are lots of resources online to help. Best way to learn is to watch build video tutorials.
They are pretty self explanatory, you just lock your parts into place in the motherboard. Don’t stress over putting in your graphics card, it’s easier than you think.
hardest part is connecting the case's front panel to the mobo.
Please do NOT download free ram online
😂😂😂😂 Real
But you can use ssd as ram
You forgot to change refresh rate
I helped a co-worker build his pc, and he had already set the ram, and some other stuff, just needed help with fans, hard drives, and water cooler. Also helped him with setting up windows and drivers, programs, etc. I couldn't get past the windows half way install, turns out he had 2 different types of ram speeds...wasted like an hour or more.
Literally my first thought after reading the title
building your 100th pc as a pro:
don't eat the funny cold paste (optional)
Bro is to humble and kind I like it
DUDE !!! you made my day.... i have a custom build pc from a well recommended factory nearby.... a lot of friends and family members had build their PC there..all well satisfied.... so do i ! in my build which is now 2 years old, i have 2x8GB @ 3200mhz RAM, and after your short video, i thought,let me look in bios like you did...and what must i see ??? WTF.... my RAM is running @2300Mhz ! i was robbed by 900Mhz for 2 Years !! did i noticed it.... Nope...... but i payed for 3200 ! so i changed the settings and run now on 3200 Mhz. Thx a lot buddy !
Knew the second he said he did everything it was gonna be this lmfao
Literally the first thing I did in my bios lol
Immediately went to fix my bios after watching this
That damn good keyboard
I thought he was gonna say he forgot to install the IO Shield XD
this was me once, these videos are helpful even if I already did them. It's good to remember!
the keyboard sounds nice
To be fair, XMP can cause blue screens on some games and even some normal softwares so, better letting it off until you really need it.
Funny thing with me building my PC, is a did everything perfectly, got all the correct parts, all the updates, setups and drivers all good, and it kept killing the power to avoid overheating…turns out its cause I put the fans on the wrong way and they were blowing all the air into the case and not out of it 💀
To be fair - If he actually ran benchmarks, he'd find out that XMP is disabled.
Bro shattered the 180 rule
I LOVE THAT KEYBOARD SOUND.
Bros side profiles like kratos
Though it IS recommended that when you build a new PC to leave XMP off while you install windows, and set it up.. once it's ready, then enable XMP since in some cases XMP can cause issues when installing an OS since it's considered an overclock.
i never benchmarked my first pc build, just opened sims 4 with tons of mods and reshade and then maxed out my gpu immediately
Love your skits...
Downloading RAM used to be such a massive joke in my IT and Computer Science classes back when I was at school 😂
Downloading more RAM can be tricky at times
you reminded me of the dark ages of SoftRAM 😭
People, if you're using windows also make sure you turn off windows fast boot.
The fast boot feature makes it so the PC will never actually fully shut down, this can cause problems with certain drivers and programs, it could also slow down your pc.
I did this on all windows machines I have had my hands on. I found that turning it off will cost 7 seconds on avarage in boot times.
Why does his voice and face makes me feel so satisfied
The side of his face looks like kratos, but his voice is kinda like "HEYYY Vsource, Michael here"
Bro is kratos but polite version 😂
Why does he look like kratos if he delivered presents instead of killing gods.
bro, i never did that... this whole time... thank you lol