Got Ventura running on this HP but the resolution is stuck at 1024 X 768. Also there seems to be different models with the same name (mine has one of the 35 watt 6500T CPUs). My Elitedesk 800 G3 also has DisplayPort and VGA instead of the HDMI. Not sure if this is the issue, but even the VGA is stuck at at the same resolution. Tried on a 4K monitor too. Very disappointing to spend to so much time to get only VGA resolutions. This guy has practically the same PC but did not mention the 1024 X 768 resolution unless I did something wrong when naming the PC model. I didn't know what to use so I used macmini8,1. The PC has the Intel 530 GPU so maybe I have to choose an older version of Mac OS.
I bought a costomized EFI for Big Sur. Hoever, the installation went into a loop. I sent several emails to Mike and never got a response. Finaly, I found a solution by installing Mojave first and then I upgraded to Big Sur.
hello, i was able to install big on and it is really good. On the other hand, I cannot get the menu with the icons during boot, even with the opencanopy driver, the resource files, and the "pickermode on external" in the config.plist. I just have a text mode boot menu. An idea ? Also, waking up blocks the machine. (Z77N wifi + sandy bridge I5) Thank you very much again! have a good day.
Hi, just tried this, but at the step of pasting in the create USB using code from Apple site plus /USB on the end I get an error 'zsh killed sudo volume ---/Volumes/USB' doh. 16GB USB stick correct format. Oh... was trying to make Mojave installer on a M1 Mac Mini. (sigh). Which turns out does not work. So, will try the Windows method. Which is hilarious Apple forks over users on simply being able to build an installer. Will try to do Big Sur installer just to have. Argh.
Hello Goodnight! I'm from Manaus/AM, Brazil, I would like to know if it is possible to install on HP EliteDesk 800 G4 with AMD Radeon R7 430 graphics card, core i7 8700 processor?
Hi Technoli, I bought an unlisted EFI from you. That means I do not have to change the serial number now? You have already done that for me? I just need to put the EFI folder on the hard drive?
I bought efi from your site. It is for aorus ultra with rx 5000 graphics. I have ordered Aorus z490 ultra g2 with i9 1090k and rx5700xt. It will be delivered in a day or two. Will your efi work with new Big Sur update 11.2.3?
I wish the author would update this to point to where you can get the EFI for this configuration, or if you can't get/buy it, then what needs to be done (step-by-step) to create it from scratch.
@@cl4udioiturra no - seems techNolli used to SELL the EFI folder, but of course, Apple would then SUE him for making $$ of something they deep illegal in the 1st place
Can u make this installer with any pc or does it have to be with a mac. If you already have a mac your defeating the purpose, cause its not for any pc.
Hi man, well done. Finally a good explanation. I have got a different model: HP Z800, and I'm having some troubles trying to use open core on mojave. Can you help me? Do you know the Z800 machine?
Glad to see a new video. You always have great information. Just got my gigabyte z490 vision-D going tonight with i9 10900 128gb ram . It is smoking fast. Thanks for all you info.
Howdy Mike! Man I miss the days when you popped out videos left and right LOL. Does the 800 G3 have only 1 M.2 slot or two like the G4? I know it also has a SSD but not sure on the other.
anyone can help me install a Z390-e i9-9900k IGPU (i have a rtx 2070 super doesnt work in macos so wanna disable gpu for this one (dual boot with windows )
I swear its only in videos that these hacks work because I have tried 3 different macs and honestly I dont get any further than having to finally put it on a usb
Do you have a list of steps you took to make your (G2) system work? Since the video's author doesn't help here, I was hoping to get pointed in the right direction to get my G2 system going or better yet, the G3 system. Thanks!
@@markkociscin695 I followed the best I could to get the system to boot, the issues I had with power management... I kinda just tinkered till I got it to work. I'm not really sure what did it. It was 5 months ago and have since moved to a MacBook Pro. So I can't really remember.
Hi mate! Great video :) i've been trying it on my Chuwi CoreBox (i5-8259u), but once done the job, Mac Os doesn't detect natively graphic card (Intel Iris Graphics 655), showing only 7mb of VRam (that's why it's laggy). Any hint about this problem? Thank you so much!
First of all, sweetie, that third display port is NOT an HDMI port. That port is a picture of a daughter board port. It can be changed. The presenter of the video has no reason to lie about his clients computer having a third display port particularly considering that he ACTUALLY FUCKING EXPLAINS IT IN THE GODDAMNED VIDEO. *Eh hem.* Excuse me. Wow. Finally. Yes. Hackintoshes can be made for profit in most parts of the USA and various countries in Europe. It's because of the doctrine of Fair Use. That's why money can be made of selling ads on videos showing you HOW to Hackintosh. It also covers selling a hackintosh computer providing the client has the ability to legally obtain the hardware and a copy of the software. You're not selling the software. You're selling your hardware and software setup expertise. If I were to do this, client would need to supply the software for a hackintosh. Apple's EULA is not law and cannot overwrite many parts of law. The courts in the USA have ruled that Apple's EULA cannot limit Fair Use in this manner. The issue would arise if the client cannot supply a legally obtained copy of the software which Apple gives away for free to those of their user base that have also purchased compatible hardware. One could argues that if the user of a Hackintosh also doesn't own official hardware capable of running their Hackintosh version that this is wrong. But once the software belongs to me legally, I should legally be allowed to give that software to another as well, right? Eh. This would have to be argued. What's the difference of my sharing a hardware DVD with you versus giving you a flash drive with the software of the movie on it?
Congratulations on the videos 👏👏👏 Helps me install Big Sur on my computer: HP Z440 Workstation intel Xeon E5 1620 v4 (Chipset c612 X99) DDR4 16GB, Nvidia K2000 2GB Please help me🙏
Yeah I don't recommend using the new download method for the installation files. Especially if your planning to use Catalina. I just wasted about 8 hours trying all the different versions but I kept getting the well known "installation failed" message with 2mins left on install. I tried modifying dates and everything. I then downloaded the installer direct from apple via the Apple store, made a bootable usb and didn't bother changing dates... it worked perfectly . I done some more digging through the package contents of the failed installers to see they had verification issues.
OH... i didn't know this was a paid sponsorship to yourself. I'm TOTALLY knocking that either, i get it and for ease of use, WELL worth it, ESPECIALLY for those that don't want to actually get their hands dirty, so don't get me totally wrong. Just, would have NEVER deduced that from your title. I just kinda got that bait/switch vibe. Anyway, wish you well. Take care.
Warning. The efi of the video does not correspond to the one sold on the site so that it does not work. balance sheet 29 dollars spent for nothing and no knowledge I am very disappointed while I had confidence in him.
![macOS Big Sur on Unsupported Macs [2008-2013] OpenCore Legacy Patcher!!!](http://i.ytimg.com/vi/flQRKWBKC60/mqdefault.jpg)
Supplying all my Hackintosh needs!! Thank you Tech Nolli!!
Thank you!
Got Ventura running on this HP but the resolution is stuck at 1024 X 768. Also there seems to be different models with the same name (mine has one of the 35 watt 6500T CPUs). My Elitedesk 800 G3 also has DisplayPort and VGA instead of the HDMI. Not sure if this is the issue, but even the VGA is stuck at at the same resolution. Tried on a 4K monitor too. Very disappointing to spend to so much time to get only VGA resolutions. This guy has practically the same PC but did not mention the 1024 X 768 resolution unless I did something wrong when naming the PC model. I didn't know what to use so I used macmini8,1. The PC has the Intel 530 GPU so maybe I have to choose an older version of Mac OS.
Please, how do you update from Catalina on hackintosh?
Yeah, I was onboard until the word "buy" came into play... I'll find out how to do this elsewhere on the web...
any luck on finding an alternate (WORKING!!) EFI folder for this configuration?
Hi TechNolli, are you not creating any more content? I would love to buy an EFI for my machine but your site does not have that option anymore :(
daily checking your Channel for new stuff & just enjoying right now ^^
Thanks for your vids...
Thank you!
I bought a costomized EFI for Big Sur. Hoever, the installation went into a loop. I sent several emails to Mike and never got a response. Finaly, I found a solution by installing Mojave first and then I upgraded to Big Sur.
Is it possible to still buy this? The link is broken :( i have a working g3 on catalina and would like to update :)
Any plans for the HP EliteDesk 800 35W G2 mini? Thank you for your vids.
If a customer sends me one I sure will!
Hi there. Will it work on a 4K monitor at 60Hz?
hello,
i was able to install big on and it is really good.
On the other hand, I cannot get the menu with the icons during boot, even with the opencanopy driver, the resource files, and the "pickermode on external" in the config.plist. I just have a text mode boot menu. An idea ?
Also, waking up blocks the machine. (Z77N wifi + sandy bridge I5)
Thank you very much again!
have a good day.
Great video 👍. Now, does it matter if it is the SFF version of this particular PC (Hp Elitedesk 800 G3 SFF)
Can you do a HP Elitebook 840 G3?
Great Vid. What about the Wifi?
8:19 did you say "the efi folder that you just purchased"? wtf?
is there a guide on how to do this on a pc? as I do not own a mac yet...
Hi, just tried this, but at the step of pasting in the create USB using code from Apple site plus /USB on the end I get an error 'zsh killed sudo volume ---/Volumes/USB' doh. 16GB USB stick correct format. Oh... was trying to make Mojave installer on a M1 Mac Mini. (sigh). Which turns out does not work. So, will try the Windows method. Which is hilarious Apple forks over users on simply being able to build an installer. Will try to do Big Sur installer just to have. Argh.
Hello, can you help me enable the secondary display ports. My hackintosh does not detect them on HP prodesk 600 G4 .
On your custom efi’s Will all the ports on the moatherboard work? And I have a WiFi card on the board, would that be configured as well?
could you make a tutorial for dell optiplex mff 7070?
re-hello !
waking up is resolved with a missing ssdt ;-)
But ...I still don't know about the menu with icon for the boot
Hello Goodnight! I'm from Manaus/AM, Brazil, I would like to know if it is possible to install on HP EliteDesk 800 G4 with AMD Radeon R7 430 graphics card, core i7 8700 processor?
Hi Technoli, I bought an unlisted EFI from you. That means I do not have to change the serial number now? You have already done that for me? I just need to put the EFI folder on the hard drive?
Hi, your site is now only on pay access apparently
i am stuck on... Successfully initilized AHCI controller
Can you also do it on Hp Laptop?
I bought efi from your site. It is for aorus ultra with rx 5000 graphics. I have ordered Aorus z490 ultra g2 with i9 1090k and rx5700xt. It will be delivered in a day or two. Will your efi work with new Big Sur update 11.2.3?
elitedesk 800 G3 I5 7400T always stuck on apfs volume start loaded filesystems
The EFI for this particular build isn't on your website anymore
I wish the author would update this to point to where you can get the EFI for this configuration, or if you can't get/buy it, then what needs to be done (step-by-step) to create it from scratch.
@@markkociscin695 there is not source FOR the EFI FOLDER?
@@cl4udioiturra no - seems techNolli used to SELL the EFI folder, but of course, Apple would then SUE him for making $$ of something they deep illegal in the 1st place
Do you have the benchmark for this computer ? Is it worth for music production ? (only using logic pro x)
Take a external Soundcard and you can do it without buffer.
thanks. any tutorial on HP8300SFF
can you do a video about legacy x58 please????
On the coding part it freezes on the kernel part it says something like kernal crash.
@TechNolli will this work on a g4? thanks!
SO where is the custom EFI folder for this machine? Did you delete all your free ones?
www.technolli.com/buy/HP-Elite-800-G3-EFI-p297267118
Will this work with the (thicker) i7 version of the HP Elite 800 G3 or do they have different insides?
I have a laptop 😔 i5 3210m can I do this ?
Can u make this installer with any pc or does it have to be with a mac. If you already have a mac your defeating the purpose, cause its not for any pc.
i have upgraded my CPU to an i7 7700T Engineering Sample. Can i still use for your EFI?
Can you use 3 displays with the 3 DP's with no issue?
Did not test multiples.
Hi man, well done. Finally a good explanation. I have got a different model: HP Z800, and I'm having some troubles trying to use open core on mojave. Can you help me? Do you know the Z800 machine?
hey technolli i have the elitedesk mini 800 g2 i7 6700 would it work on that 1
Sleep work perfect with Hp 8000 G3 ?
Stuck during boot at apfs_module_start
Does it work on a Samsung galaxy Book flex?
Amazing video. New subscriber. Keep up the great work.
Glad to see a new video. You always have great information. Just got my gigabyte z490 vision-D going tonight with i9 10900 128gb ram . It is smoking fast. Thanks for all you info.
Thank you!
does it work on hp elitedesk 800 g4 ?
as always best videos, Thank you
Howdy Mike! Man I miss the days when you popped out videos left and right LOL. Does the 800 G3 have only 1 M.2 slot or two like the G4? I know it also has a SSD but not sure on the other.
Yes it does
Does the audio work?
Yes it does
anyone can help me install a Z390-e i9-9900k IGPU (i have a rtx 2070 super doesnt work in macos so wanna disable gpu for this one (dual boot with windows )
just because you downloaded it from the internet doesnt mean it doesnt contain something malicious...
I swear its only in videos that these hacks work because I have tried 3 different macs and honestly I dont get any further than having to finally put it on a usb
I followed this guide to get macOS working on my g2! Only issues I'm having is the post error "real time clock", any solution?
Do you have a list of steps you took to make your (G2) system work? Since the video's author doesn't help here, I was hoping to get pointed in the right direction to get my G2 system going or better yet, the G3 system. Thanks!
@@markkociscin695 I followed the best I could to get the system to boot, the issues I had with power management... I kinda just tinkered till I got it to work. I'm not really sure what did it. It was 5 months ago and have since moved to a MacBook Pro. So I can't really remember.
@@N0nchu Thanks for the update...bummer that you can't recall what was done, but yeah, getting a new Mac is the best route to go. Thanks again! --Mark
I love your videos you'r fantastic
It has USB-C ... you can use it as Thunderbolt
Hi mate! Great video :) i've been trying it on my Chuwi CoreBox (i5-8259u), but once done the job, Mac Os doesn't detect natively graphic card (Intel Iris Graphics 655), showing only 7mb of VRam (that's why it's laggy). Any hint about this problem? Thank you so much!
Add boot arg to NVRAM: -wegnoegpu and it will use the intel graphic only
The third "display port" is actually HDMI. Also you cannot do these for profit. It will get you a huge law suite from Apple.
First of all, sweetie, that third display port is NOT an HDMI port. That port is a picture of a daughter board port. It can be changed. The presenter of the video has no reason to lie about his clients computer having a third display port particularly considering that he ACTUALLY FUCKING EXPLAINS IT IN THE GODDAMNED VIDEO.
*Eh hem.* Excuse me. Wow.
Finally. Yes. Hackintoshes can be made for profit in most parts of the USA and various countries in Europe. It's because of the doctrine of Fair Use. That's why money can be made of selling ads on videos showing you HOW to Hackintosh. It also covers selling a hackintosh computer providing the client has the ability to legally obtain the hardware and a copy of the software. You're not selling the software. You're selling your hardware and software setup expertise. If I were to do this, client would need to supply the software for a hackintosh. Apple's EULA is not law and cannot overwrite many parts of law. The courts in the USA have ruled that Apple's EULA cannot limit Fair Use in this manner. The issue would arise if the client cannot supply a legally obtained copy of the software which Apple gives away for free to those of their user base that have also purchased compatible hardware. One could argues that if the user of a Hackintosh also doesn't own official hardware capable of running their Hackintosh version that this is wrong. But once the software belongs to me legally, I should legally be allowed to give that software to another as well, right? Eh. This would have to be argued. What's the difference of my sharing a hardware DVD with you versus giving you a flash drive with the software of the movie on it?
Doesn't matter what I try, oc or clover the usb ports turn off while booting and then it halts.
Please make a new video on how to install big sur on optiplex 3040 :)
Same thing
Congratulations on the videos 👏👏👏
Helps me install Big Sur on my computer: HP Z440 Workstation intel Xeon E5 1620 v4 (Chipset c612 X99) DDR4 16GB, Nvidia K2000 2GB
Please help me🙏
Yeah I don't recommend using the new download method for the installation files. Especially if your planning to use Catalina. I just wasted about 8 hours trying all the different versions but I kept getting the well known "installation failed" message with 2mins left on install. I tried modifying dates and everything. I then downloaded the installer direct from apple via the Apple store, made a bootable usb and didn't bother changing dates... it worked perfectly .
I done some more digging through the package contents of the failed installers to see they had verification issues.
and thank you very much in advance
OH... i didn't know this was a paid sponsorship to yourself. I'm TOTALLY knocking that either, i get it and for ease of use, WELL worth it, ESPECIALLY for those that don't want to actually get their hands dirty, so don't get me totally wrong. Just, would have NEVER deduced that from your title. I just kinda got that bait/switch vibe.
Anyway, wish you well. Take care.
5 Thumbs Up
Thank you Larry!
Warning. The efi of the video does not correspond to the one sold on the site so that it does not work. balance sheet 29 dollars spent for nothing and no knowledge I am very disappointed while I had confidence in him.
FAKE TUTORIAL !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
why are us charging for this, this is a shame.
He need to be paid for his time. I have no problem paying for someone time to do all this work.