The whole time watching this I got that odd satisfactory feeling where you're watching something and for no reason you get the chills, goosebumps and a little bit sleepy.
Been really enjoying you videos, from your camping to matinece you do a great job with your production and filming, you make me want to get a bike and go exploring
So nicely done man....I managed to oil my garage properly a few weeks ago with my XR.....would love an FTB sticker for my bike...postage would probably send me into recession.....but love your channel
I like the music. Sorry I didnt get back to ya about the bike you were selling bro. I ended up grabbing a dr650 that was all molded for a great deal with 5k miles. Great vids as always!!! Be safe!
Hey this is what my channel is for 😂😂😂... But absolutely amazing video quality and idk... The music adds so much to it I wouldn't think twice about it lol
Nice. I'm in the process of restoring a 96 I just got and this video answered some questions I have had. Thanks for posting this. I do have one question. The bolt on the bottom of the motor you pulled 2nd is that oil as well? Where is the transmission drain bolt? Love this bike and I'm really excited to restore it to its former glory.
The bolt on the front drains most of the engine oil, primarily the portion stored in the frame. The bolt on the lower left side of the crank case drains the remaining oil from the engine and transmission. There is no drain for the transmission specifically, the engine oil lubricates both.
Music was annoying, but I just turned it down. You don't need to do the pumping/open and close the bleeder screw thing to bleed the brakes. Just loosen the bleeder screw, and let the fluid dribble while you keep the master cylinder full. I usually use about 16oz. per brake, just to make sure all the old fluid is flushed out and there is no air in the system. After letting 16oz dribble through the system, and the master cylinder at least half full, close the bleeder screw, top off the master cylinder (don't over fill it, there must be room for that rubber diaphragm) and put the cover back on. I have yet to find a bike that this does not work on. I don't know what the bleeder screws are made out of, but they are EXTREMELY soft. I have ruined them with high dollar flare nut wrenches. I now use a flare nut wrench, and clamp it down on the fitting with vise grips. Even the expensive wrenches seem to fit too loosely on the fitting. You might want to consider Speedbleeders if they are available for your bike.
I hope I didn't make a mistake with this music... It's supposed to be relaxing, but now that I'm re-watching, it just seems weird and depressing lol
Glad to see you keeping the XR running well.
Where did you get the Ratchet bike lift?
Perfect music for the job! Resembles the calming effect of knowing the bike is maintained and ready for action...
It's replacing my white noise to sleep by
@Bob Sacamano yikes...
The whole time watching this I got that odd satisfactory feeling where you're watching something and for no reason you get the chills, goosebumps and a little bit sleepy.
There is nothing more satisfying than watching another person work on one of their passions.
zen and the art of motorcycle maintenance!
The music was absolutely not a mistake. Once i heard this song i automatically liked this video. I'm also working on my own bike as well.
It's so dramatic with the music, I like it!
zen the art of motorcycle maintenance.
Great camera angles, beautiful lighting, relaxing music. Excellent!
This video was exactly what I needed after a stressful day at work. Put my XR650L away for the winter two weeks ago.
Thanks for the upload!.
The music score is very apt especially in today’s current climate . Keep safe
My "you weren't born to pay bills and die" T Shirt just arrived today!!! Good looking shirt and GREAT QUALITY as well.. thanks brother!!
Im glad you like it. I'm impressed with the quality of those.
@@FridaysTheBomb 😁👍
It is possible to look at this for hours. 🥰
Beautiful I'm getting the pig out for a clean tomorrow cheers
Enjoy :)
Thanks man. I needed that.
Sweet maintenance video, very satisfying to watch for some reason, keep tearing up these good uploads!!!
Thanks!
Your best video ever. Definitely your best commentary.
Commentary?
Very creative, a nice little distraction. Thank you, almost as therapeutic as watching Aden's channel with high end Japanese food being prepared.
Been really enjoying you videos, from your camping to matinece you do a great job with your production and filming, you make me want to get a bike and go exploring
Thank you, I'm glad you like the content.
Thanks for posting this music. I was unaware of the history of the Satie score. Very well done video.
I had actually used Saties's "gnossienne" pieces but one of them has a copyright owner who blocked the video. So these are all royalty free.
greatest video on youtube
So therapeutic
Yes it can be. Hum ching yoga. A hole video not a word. Thanks for the upload.
So nicely done man....I managed to oil my garage properly a few weeks ago with my XR.....would love an FTB sticker for my bike...postage would probably send me into recession.....but love your channel
I love it. Excellent music and camera work
I like the music. Sorry I didnt get back to ya about the bike you were selling bro. I ended up grabbing a dr650 that was all molded for a great deal with 5k miles. Great vids as always!!! Be safe!
That is a beautiful bike
Greetings
Great video 🇺🇸🍾🎉🇺🇸
What brand of skid plate do you have on?
Thanks for assisting us
Keep producing more videos
This video is gorgeous, subbed!
Love the music..love the vid...well done.
Thanks. The original music i had on it was copyrighted and they blocked the video this morning :(
I did maintenance last week on my FZ 07 and can am outlander. did more than required and now, no where to go. In May maybe.
I miss my XR
Well done. Really enjoyed it. 👏
Great video.
Awesome! So...where do I get a FTB sticker for my XR650L? 🤔
Hey this is what my channel is for 😂😂😂... But absolutely amazing video quality and idk... The music adds so much to it I wouldn't think twice about it lol
That worked out well 👍
Awesome video👍👍👍👍
Thanks!👍
Dont you drop the skid plate your oil change ? - need to get oil screen out and cleaned and makes less mess
0:45 the perfect serial killer shot
Nice. I'm in the process of restoring a 96 I just got and this video answered some questions I have had. Thanks for posting this. I do have one question. The bolt on the bottom of the motor you pulled 2nd is that oil as well? Where is the transmission drain bolt? Love this bike and I'm really excited to restore it to its former glory.
The bolt on the front drains most of the engine oil, primarily the portion stored in the frame. The bolt on the lower left side of the crank case drains the remaining oil from the engine and transmission. There is no drain for the transmission specifically, the engine oil lubricates both.
That stand will do. An impact would be nice if time was an issue
Music was annoying, but I just turned it down. You don't need to do the pumping/open and close the bleeder screw thing to bleed the brakes. Just loosen the bleeder screw, and let the fluid dribble while you keep the master cylinder full. I usually use about 16oz. per brake, just to make sure all the old fluid is flushed out and there is no air in the system. After letting 16oz dribble through the system, and the master cylinder at least half full, close the bleeder screw, top off the master cylinder (don't over fill it, there must be room for that rubber diaphragm) and put the cover back on. I have yet to find a bike that this does not work on. I don't know what the bleeder screws are made out of, but they are EXTREMELY soft. I have ruined them with high dollar flare nut wrenches. I now use a flare nut wrench, and clamp it down on the fitting with vise grips. Even the expensive wrenches seem to fit too loosely on the fitting. You might want to consider Speedbleeders if they are available for your bike.
Your tire tread patterns front to rear are opposite to each other. Should they be that way?
The directional arrows are right
The music makes me think your going to drop dead at the end or something, thanks for the video though
Yeah in retrospect it doesn't really work.
Buddy, What's going on..?
Making videos and hanging out Michael. Whats going on with you?
Hysj