I’m gonna bust my a** to get a Tacoma. Looks. Reliability. No other midsize truck really does it for me. To each their own of course… would be cool to see a boosted Tacoma in the future.
After owning a Tacoma SR5 for 20 years ( I bought it in 1992) I finally sold it and got me a 2023 Tacoma SR access cab a month ago. I’m really excited and your video inspired me to do some mods to it. Great video, sir!
I have the UCA’s, N3 struts w/coils, and N3 rear shocks. It’s actually an amazing budget package, it replaced my Bilstein 5100’s, the ride is much better IMHO. 2008 Tacoma. 140k miles, I am shocked by how such a budget 3” hit way above its weight class. Thanks RC.
That was a lot of content in one video, very nice but left alot of questions as you can see. I for one only knew of half the products offered. I would have liked to see more details on seat covers fabric ect. There was no mention of tire size or if wheel offset was needed.
You should contact our Support staff at 1-800-222-7023 when you are ready. Some of the parts could be the same between kits and you may only need to purchase a few items.
@@RoughCountryTV Hey with those size tires and the factory front bumper was there any rubbing? Did you have to do any cutting? I know you guys put on an aftermarket bumper but I'll be sticking with the stock bumper for now.
Nice build but left out some critical info. They installed a front diff drop (not shown), what size tires were installed? Didn’t mention required alignment and how much caster is required to run larger tires. Also wheel wells have to be trimmed and possibly body mount chop done. Details but important details.
make sure you replace the uppwer control arm you cant get enough adjustment with alignment trust me. i got the procomp 3 in. i got it done at the 4wheel parts in sparks nv. they told me i didnt need to replace my upper they was incorrect thats why my front tirers a wear out quickly. i plan to replace the upper and lower with dirt kings yoiu need to replace both.
It comes with a new uca. Even though it comes with one, im gonna change mine out when I get it. And snything above 2-2.5 inches new ucas are need as well as diff drop is reccomended
Probably destroys CV axles, I had a 2.5in lift on mine and CV axle boots would rip every couple of years so I lowered it some closer to 2 inches now so time will tell and I have diff drop
I have to ask about the back cover. If I plan on throwing a 4 wheeler or dirt bike up there, would you recommend a roll cover? Would it kind of be a PITA to have to disassemble the cover to fit the wheel up front? Awesome build btw. I am looking at a trd sport and love the body style. The factory tires and lift is what always throws me off. Adding the lift and the wheels totally changes the look. When I get mine I will definitely be looking into your products
I had that lift on my 2012 taco and my abs was going off on cornering in the mountains and my axel boots ripped because of the angle of the axel. The lift needs knuckles and proper drop for dif
Will it void the bumper to bumper warranty for Toyota? I really want to get RC lift kit but afraid of my Bumper to bumper warranty will be void. I have it for the next 7 years
Too bad the steps are lower than stock now, kinda defeats the offroad function. How can you access the winch clutch ? I mean who wants to power out 80 ft. of winch line? Otherwise good product demo.
I think this a good looking build but when you start doing 4-8” lifts that’s when things start going to crap especially when your 4wd and this I think gives RC a bad name but overall this video and build looks solid as hell.
I’m thinking about making a Tacoma purchase always been a Silverado guy I would like some feedback do you guys recommend the vehicle I’m 6 foot 2 tall would I be drive this truck confortable
To be honest, I would never really recommend rough country, nothing wrong with them, but if budget was really a issue. Then I'd recommend them. Though, I'd definitely skip the n3 and spacer lift, and gk straight to the v2 or vertex line up if quality does look that good as it was in the video. Other than that. I am glad I found this video. Though, I'd definitely want to know more about those upper control arms and new leaf pack you guys have for the tacoma! Please do a review! And how much of lift does the rear leaf pack give? Most taco owners would love around 2-3" I saw the rc uca and leaf pack but never found much more info on it since I assumed it was new. Definitely curious on the price, lift specs on this. I wonder if they squeak bad as all pros, or the first batch of ome. I also wonder how bad these would sag. If their any better than old man emu or all pro leaf pack, I'd definitely give it a try! Looks promising already
Go with deavers leafs springs best in the game, this RC lift did look really nice not gunna lie. Not sure how long they’ll last compared to kings, dobinsons, or even fox.
I absolutely love the lift. It’s exactly what I’m going for don’t want to go to big and deal with the suspension. Is there any product from rough country where it’ll take the rake out meaning the front will be level with the back can the leaf spring package come down to make the front level with the back.
I love this video and I plan to do most of these mods, but for the love of everything decent stop it with the flashing lights over the B roll images!!!
That from bumper looks amazing! The bed cover is really nice, I really enjoy the video and the information, but editors: the glow is unnecessary and annoying, the music is not the correct one, is ton loud when he is speaking also. Keep coming good content. 💪🏼
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
It’s crazy how much a set of wheels and a lift change the appearance. Hence why it’s smarter to just buy a base model and build it up
I’ve thought about that. I’m in the market. I’m probably just going to buy an sr5 and have lockers installed with new gears
@@michaelirick3984 that’s what I would do. Make it the way you want it. It feels like you accomplished more doing it yourself
That’s a gorgeous build without going over the top. Looks like a top end factory offering! The bumper is very impressive.
I’m gonna bust my a** to get a Tacoma. Looks. Reliability. No other midsize truck really does it for me. To each their own of course… would be cool to see a boosted Tacoma in the future.
After owning a Tacoma SR5 for 20 years ( I bought it in 1992) I finally sold it and got me a 2023 Tacoma SR access cab a month ago. I’m really excited and your video inspired me to do some mods to it. Great video, sir!
The flashing effects killed this video.
I know it was kind of anoying.
That’s what happens when an intern gets a hold of iMovie.
So did the seat cover.
Definitely interested in that bumper. Hopefully ya'll release it soon. Glad to see that us Taco guys are finally getting some RC love!
Damn. Rough country is changing the game for the Tacoma fans! Specially the price! So proud of you guys. !!!
Im happy to watch people build up a bonestock version instead of swapping out a very expensive version.
I did the 3” RC coil over kit on my 2016 OR. Paired with new UCAs. Perfect. Fits 285s like a glove.
How you liking the kit so far?
@@JonnyG905 So far so good. Thinking of doing OME springs in the back and deleting the block.
@@jonnewbury3482you didn’t have no rubbing ?
You just did everything I want to do on my ‘21 MGM OR! Great job guys!
dang this is so informative and they totally turned that truck into a BEAST! Great Job Y'all!!
This build is more capable and looks better then these other Tacoma running super high end stuff leaving them broke lol
Nice work RC
Thank you for the detailed explanation and especially tires and off sets.
How can we be notified when the hybrid bumper is released? That bumper looks great.
If TOYOTA TACOMA IS so GREAT
WHY DOES IT NEED A HYBRID BUMPER?
Didn’t you spend enough buying it?
@@bretthoffman2128 because the bumper looks awesome
@@bretthoffman2128 Wtf is up with this dude… people wanna modify their stuff, if you don’t like it, ptfo
@@JustTyIer yup👍
@@bretthoffman2128
Lol what are you mad about 😂.
You make the wrong choice with a colorado or ranger ?
I would give anything to do this to my 21 tacoma. Sure looks good. Nice job guys!
Best looking bumper I've seen thus far
I have the UCA’s, N3 struts w/coils, and N3 rear shocks. It’s actually an amazing budget package, it replaced my Bilstein 5100’s, the ride is much better IMHO.
2008 Tacoma. 140k miles, I am shocked by how such a budget 3” hit way above its weight class. Thanks RC.
I'm glad someone for their seat covers. Ordered a set June 6th. Still waiting!
I wanna bring my 4 Runner in to your shop!!! Tacoma build is perfect!
Hey the up grades were great 👍 not only does it look better but it just looks like you're ready and confident in going off road.
Bought those seat covers and they are worth every penny
wow tacoma's look so much better lifted!!! great job rough country!
That’s the EXACT bumper I want for my taco!
take off the steps and itll look way better, more aggressive and will give the truck more ground clearance which makes it look higher off the ground
imo steps just make trucks look like its a grandpa truck
Nice build! I’m looking to level my Tacoma with the bilstein 5100s
Need to see 09-14 yukon
Wish y'all made a front bumper like this for 2.5 gen!
awesome build! just ordered this 3.5" lift, need a 6ft bed cover
Definitely looking forward to the bumper
I have this exact truck and this is the goal I have for a build, looks amazing
This helps a lot. Bought my 21 with the lift and aftermarket wheels and tires from the dealer but didn't come with a rail system. Thanks
That was a lot of content in one video, very nice but left alot of questions as you can see. I for one only knew of half the products offered. I would have liked to see more details on seat covers fabric ect. There was no mention of tire size or if wheel offset was needed.
Amazing transformation
Great video, very informative and that Tacoma really looks good with the new accessories, great job...👍👍
Awsome video! May have to upgrade from my 3" to 3.5" for those front struts!
You should contact our Support staff at 1-800-222-7023 when you are ready. Some of the parts could be the same between kits and you may only need to purchase a few items.
@@RoughCountryTV Hey with those size tires and the factory front bumper was there any rubbing? Did you have to do any cutting? I know you guys put on an aftermarket bumper but I'll be sticking with the stock bumper for now.
Wish I had the cash to do that to my 18 taco. That looks great
Guys u r perfect in doing the mods
Great build! Perfect for the tacoma!
Nice build but left out some critical info.
They installed a front diff drop (not shown), what size tires were installed? Didn’t mention required alignment and how much caster is required to run larger tires. Also wheel wells have to be trimmed and possibly body mount chop done.
Details but important details.
I love a good clean build
Great video! You guys are doing better and better!
Can we get a install video on the high clearance bumper, just picked one up would feel more confident with a vid!😅
make sure you replace the uppwer control arm you cant get enough adjustment with alignment trust me. i got the procomp 3 in. i got it done at the 4wheel parts in sparks nv. they told me i didnt need to replace my upper they was incorrect thats why my front tirers a wear out quickly. i plan to replace the upper and lower with dirt kings yoiu need to replace both.
It comes with a new uca. Even though it comes with one, im gonna change mine out when I get it. And snything above 2-2.5 inches new ucas are need as well as diff drop is reccomended
I want that bumper. Awesome!
Just got my kit lift 4” for my tacoma today! Im starting to regret not buying the 6" 😅
Get that CV axil looked at. The higher you go the more you have to account for the truck never designed to sit that high. 4 inches is good bro ahah.
Love it brother
What size tires were put on this Taco?
Are the coil overs adjustable? Also, does the 3.5” put the CV axles in a compromised position? Thank you! Build looks amazing btw!
Probably destroys CV axles, I had a 2.5in lift on mine and CV axle boots would rip every couple of years so I lowered it some closer to 2 inches now so time will tell and I have diff drop
Love that Toyota jump 😂
I have to ask about the back cover. If I plan on throwing a 4 wheeler or dirt bike up there, would you recommend a roll cover? Would it kind of be a PITA to have to disassemble the cover to fit the wheel up front?
Awesome build btw. I am looking at a trd sport and love the body style. The factory tires and lift is what always throws me off. Adding the lift and the wheels totally changes the look. When I get mine I will definitely be looking into your products
My dream Tacoma 🥺
Thanks for the great info looks sweet!
Where's the bumper! I looked on your website and definitely interested, but no bumper.
Great information and build!
Needs a trd grill and trd headlights
I had that lift on my 2012 taco and my abs was going off on cornering in the mountains and my axel boots ripped because of the angle of the axel. The lift needs knuckles and proper drop for dif
Literally a Rough Country commercial.
that front bumper ! i need it
Will it void the bumper to bumper warranty for Toyota? I really want to get RC lift kit but afraid of my Bumper to bumper warranty will be void. I have it for the next 7 years
looks so amazing, Great job!!!!
What is the different before and after in gas and mileage performance?
For 4x2 can you use the same lift?
Yes you can
Too bad the steps are lower than stock now, kinda defeats the offroad function. How can you access the winch clutch ? I mean who wants to power out 80 ft. of winch line? Otherwise good product demo.
Your truck looks great brother, I have a 2020 I'm going to lift, would you tell me the size of the tires you went with
I need that truck !
Looks great
RC "STOP THE INSANITY" get started on the NEW 2022 TUNDRA Bumper PRONTO!
I think this a good looking build but when you start doing 4-8” lifts that’s when things start going to crap especially when your 4wd and this I think gives RC a bad name but overall this video and build looks solid as hell.
I’m thinking about making a Tacoma purchase always been a Silverado guy I would like some feedback do you guys recommend the vehicle I’m 6 foot 2 tall would I be drive this truck confortable
Really informative vid 👍🏾👍🏾👍🏾thank you
2019+ Silverado duramax!
Morimoto headlights and taillights!!
Is it a true 3.5 in lift or only gets about 2.5 in of lift from the kit and the other inch or so from the bigger tires?
19:53 Looks like a scene out of TWD
Did lifting it 3.5 inches, messed with the tss sensor?
Just a rough idea on what the lift cost would be?
cool vid!
Super cool boos I have one 21 Tacoma trd sport I need recommend for my Tacoma
could u show one being installed on a 2016 f150 4x4?
I want the lift kit so bad but it’s taking me too long to save up for😭
You should build up a Cherokee XJ. That’s what my rig is.
We did one several years ago, but we do have quite a few new products for them now.
dont rude lisn talk wach this
Just subscribed! Awesome mod. What would that exact lift mod and truck bed upgrade run a normal Joe Shmoe like myself? ‘22 taco SR5 4x2.
Awesome 😎
What was the tire size? I didn't catch it after viewing the video twice. Thanks.
To be honest, I would never really recommend rough country, nothing wrong with them, but if budget was really a issue. Then I'd recommend them. Though, I'd definitely skip the n3 and spacer lift, and gk straight to the v2 or vertex line up if quality does look that good as it was in the video. Other than that. I am glad I found this video. Though, I'd definitely want to know more about those upper control arms and new leaf pack you guys have for the tacoma! Please do a review! And how much of lift does the rear leaf pack give? Most taco owners would love around 2-3"
I saw the rc uca and leaf pack but never found much more info on it since I assumed it was new. Definitely curious on the price, lift specs on this. I wonder if they squeak bad as all pros, or the first batch of ome. I also wonder how bad these would sag. If their any better than old man emu or all pro leaf pack, I'd definitely give it a try! Looks promising already
Go with deavers leafs springs best in the game, this RC lift did look really nice not gunna lie. Not sure how long they’ll last compared to kings, dobinsons, or even fox.
@@overland_cam I can agree to that
I absolutely love the lift. It’s exactly what I’m going for don’t want to go to big and deal with the suspension. Is there any product from rough country where it’ll take the rake out meaning the front will be level with the back can the leaf spring package come down to make the front level with the back.
Is there any droop travel left in the front after this lift?
Looks excellent Minus the side steps. Those things will get hung up on rocks and get tore up
I love this video and I plan to do most of these mods, but for the love of everything decent stop it with the flashing lights over the B roll images!!!
That from bumper looks amazing! The bed cover is really nice, I really enjoy the video and the information, but editors: the glow is unnecessary and annoying, the music is not the correct one, is ton loud when he is speaking also. Keep coming good content. 💪🏼
Great job
Hello,, how about sport bar and snorkeling tube
I never heard a tire size on the video
What is the tire size?
is there any rubbing? most have to do the CMC to make those tires fit
How does this affect the pinion angle?
So wtf up wit the drill to the bed fender well
can your lifts / products be installed by a dealer? Or can you recommend
a shop to do the work. I live in Washington State
Do you guys sell a 4 inch lift spindles for the 3.5 Vertex Coilovers. My forged uca tha came with my kit touches the coil spring.
How’s the cv axle look with the 3.5 ? With my rc 3in my angles don’t look so good even with my diff crop
Drop
Any plans on coming out with seat covers for 5th gen 4Runners?
How much does it cost for all of that modifications includes the labour? I want to modify my taco.
Do you loose the platform in the back seats with the seatcovers?