I've watched RUclips for about 15 years and have commented maybe 5 times. I have to say that this video is exactly what a do it yourselfer is looking for. Well done editing, excellent tips and tricks and only necessary material is shown. Oh... and the title is spot-on. Your technique is easy to follow, produces professional results and it actually encourages a first timer to give it a try. Thank you very much for the time and energy you put into this video.
We started our remodeling project almost a year ago. Then our contractors got busy, and now the pandemic. So, to make progress we are doing things ourselves. This video made knock down seem a lot less intimidating. Thank you!
Perfect from beginning to end, I've been remolding my house for about 3 months now and have seen a tone of video,, But you show it complete with no BS from beginning to end!
I've watched a lot of videos on how to do this. This one is the best, IMHO. VG speaking voice, VG photography, and lots of detail (especially on the mud consistency & shooting pressures). Nice job.
THANK U VERY MUCH,from a guy that trys to do everything myself,becuz i HAVE NOT ever (in my life tyme yet) in my hometown,found anyone that CARES to do it to the BEST of there skill level. this is going to HELP me (fix/cover/ext) some VERY,VERY poor,sloppy drywall work i just had done(i had to cut him loose)as he REALLY#%^%^$#^ my drywall up.this will save all the work i did hanging my own drywall(he did the mud work) i mean stole hard earned $$ from me.thank u utube and thank u for taking the tyme to help others U ROCK MY FRIEND,god will bless u AMEN
@@D.I.Y._All-in-OneI pretty much copied all the information here that you relayed. 3 most important tips were - amount of water to add to get proper consistency of mud, 20 PSI and the large knock down paddle at 10 degrees. I used a 6’x4’ of old cardboard for testing and to see what it was supposed to look like, waited till it dried up and knocked that down. I then did my ceiling which was 14’x12’ and it turned out perfect. Why was it perfect? Because of your tips. It could have easily turned out to be orange peel, to wet and to much PSI, or I could have used the paddle at 45 degrees and not just knocked it down but scraped it off as well. I tip my hat to you and am thankful you posted this video.
Great Video. Definitely agree with pre-priming. just did a small bathroom in this style and thanks for the video. i ran it at about 29PSI and it covered well with a good pattern. sprayed twice, 2nd time to fill gaps in pattern and make sure the edges were covered.
Well it really depends on the temperature and the humidity of the area you're working in. For instance if it's hot with not much humidity it will be ready much sooner, under 10 min possibly, but if it's colder it may take longer. Right when the texture starts to become slighty firmer, it's time to knock it down.
I've not heard the recommendation to prime before texturing, but once I heard you say it, it makes perfect sense. I know that as I'm working to smooth out spots by applying additional mud with a knife, the mud dries really fast when applied over existing mud. If I don't smooth it our right away, the mud I just applied will start to peel off. Question though... do you reprime again before applying the finish paint?
Hi C.L.S. Allinone, when you say you primer the drywall first, do you mean regular wall/ceiling primer like Zinsser Bulls Eye 1-2-3 Interior type primer? Or do you mean a special drywall primer? Thanks in advance for your reply.
I do a lot of drywall patches for my business. The customer pays me by the hour, they are never thrilled when they learn the wall or ceiling needs to be primed first. So a few years ago I tried something that I figured I’d share with you. So how I deal with the inconsistency of texturing drywall and mud and previously painted walls is instead of priming, I turn the pressure way up on my gun, then I spray a fine mist of texture on the patch and on the surrounding drywall. I then let that dry by aiming a fan on the area to speed things up. ( or just let it dry naturally) After the whole area to be textured Is dry and has turned white, I now will start the actual texture process. Works like a charm. And it helps blend in the new texture with the old even better. It is 100% undetectable. But on a large ceiling like you’re doing I’d probably primer it??? But if the customer was wanting to save money I’d mist it all, then texture. This method works especially well in a kitchen or bathroom environment where it’s been painted in semi gloss. Don’t be afraid lol cause it sounds like it could go wrong, but it won’t. If you do drywall patches for work or even at home this tip will save time, money and it’ll come out looking perfect every time. The fine mist takes the place of the primer to make everything the same surface to be textured upon.
At least 5 min. But sometimes it really varies. It depends how Warm or cold it is, how much humidity there is etc. All this can affect how fast it dries or stays wet. Just test a very small area first and that will give you an idea of how long you should wait
haters hate,cuz thats what haters do...they try to tear down others to make them self feel better about themselfs(funny thing is..the haters r not open to any thing new and will never b any better at ANYTHING cuz they haters, they hate there life and only care about themselfs..(sorry to go on and on about this)
Why would anybody want knockdown texture on their walls. Im here learning how to recreate this because my walls already have it. With they didnt to begin with lol
It's usually done by builders to obscure imperfections which would otherwise be visible on a large area not broken up by furniture, hanging pictures etc.
![Knock-Down Ceiling Texture [Complete Guide]](/img/1.gif)
I've watched RUclips for about 15 years and have commented maybe 5 times. I have to say that this video is exactly what a do it yourselfer is looking for. Well done editing, excellent tips and tricks and only necessary material is shown. Oh... and the title is spot-on. Your technique is easy to follow, produces professional results and it actually encourages a first timer to give it a try. Thank you very much for the time and energy you put into this video.
Thank you I Appreciate your feedback
I agree
I've seen all of the videos on knockdown texture and yours is by far the best in explaining and demonstrating. Many thanks
Thank you
Excellent.
100% correct
That was the best tutorial for applying a knockdown texture. Thank you!
We started our remodeling project almost a year ago. Then
our contractors got busy, and now the pandemic. So, to make progress we are doing things ourselves. This video made knock down seem a lot less intimidating. Thank you!
Perfect from beginning to end, I've been remolding my house for about 3 months now and have seen a tone of video,, But you show it complete with no BS from beginning to end!
Glad it helped you
Best video I've seen on knockdown thank you
Agree - best video on knockdown texture - hits all of the points you need
I've watched a lot of videos on how to do this. This one is the best, IMHO. VG speaking voice, VG photography, and lots of detail (especially on the mud consistency & shooting pressures). Nice job.
Thanks man
THANK U VERY MUCH,from a guy that trys to do everything myself,becuz i HAVE NOT ever (in my life tyme yet) in my hometown,found anyone that CARES to do it to the BEST of there skill level. this is going to HELP me (fix/cover/ext) some VERY,VERY poor,sloppy drywall work i just had done(i had to cut him loose)as he REALLY#%^%^$#^ my drywall up.this will save all the work i did hanging my own drywall(he did the mud work) i mean stole hard earned $$ from me.thank u utube and thank u for taking the tyme to help others U ROCK MY FRIEND,god will bless u AMEN
Glad i can help
No wasted time, all the info. Awesome!
Great video. Covered everything. Good job👍
Glad it was helpful!
75 likes and ZERO dislikes. Awesome content! Thank you for this.
your welcome
Thank you for sharing your knowledge.
Great video!! Thank you very much!!
Great video. Thanks for posting!
Great tips, thank you.
Glad it was helpful!
@@D.I.Y._All-in-OneI pretty much copied all the information here that you relayed. 3 most important tips were - amount of water to add to get proper consistency of mud, 20 PSI and the large knock down paddle at 10 degrees. I used a 6’x4’ of old cardboard for testing and to see what it was supposed to look like, waited till it dried up and knocked that down. I then did my ceiling which was 14’x12’ and it turned out perfect.
Why was it perfect? Because of your tips. It could have easily turned out to be orange peel, to wet and to much PSI, or I could have used the paddle at 45 degrees and not just knocked it down but scraped it off as well.
I tip my hat to you and am thankful you posted this video.
Great video
Sharp video. Straight to the point and very clear!
Great video and explanation! thanks
Thank you
Great Video. Definitely agree with pre-priming. just did a small bathroom in this style and thanks for the video. i ran it at about 29PSI and it covered well with a good pattern. sprayed twice, 2nd time to fill gaps in pattern and make sure the edges were covered.
Thanks. Sounds like your bathroom turned out great.
Good job man, sometimes simple is better. That was great content
Thankyou
Great explanation! Thank you sooo much!🙏🏼👍🏼
Great video! Thank you
That looks perfect !
Dude awesome video. Is it possible you could maybe put some links to purchase purchase materials we would need
great job! i thumbed it, but did u say 20mins after the spray you can knock it down? i ve been seeing other vids say 2-3mins...which is it? thanks
Well it really depends on the temperature and the humidity of the area you're working in. For instance if it's hot with not much humidity it will be ready much sooner, under 10 min possibly, but if it's colder it may take longer. Right when the texture starts to become slighty firmer, it's time to knock it down.
Great video! Thank you❣️
awesome video! Thanks!
Great video, thank you.
Best tip here was wipe the blade after each pass 👍🏻
Could you give details on your air compressor? Trying to find something affordable that will get the job done.
You are the best!
Great video. To the point, no b.s.
Thanks
Please tell me, are you talking about paint primer?. Or a different kind of primer?! Thanks.
Paint primer or dry wall primer
Very helpful 👍🏻
Can you do knock down wall if it is paneling not drywall
Yes, but the walls would need prepped with a really strong primer first.
Hi. Great video. Thank u for posting. I was just wondering. Do u prime and paint the ceiling after u texture?
You can or just use a 2 in 1 paint & primer .
Thanks for the video!
Very helpful thank you
What size is that knock down tool. Is it 18” or 24” and what brand? Great video 👍
How many time before smash the mud ?
Where can I buy that same clear blade you have on your knife
Amazon
I've not heard the recommendation to prime before texturing, but once I heard you say it, it makes perfect sense. I know that as I'm working to smooth out spots by applying additional mud with a knife, the mud dries really fast when applied over existing mud. If I don't smooth it our right away, the mud I just applied will start to peel off.
Question though... do you reprime again before applying the finish paint?
You can. Or just make sure its a paint&primer in one.
Hi C.L.S. Allinone, when you say you primer the drywall first, do you mean regular wall/ceiling primer like Zinsser Bulls Eye 1-2-3 Interior type primer? Or do you mean a special drywall primer? Thanks in advance for your reply.
Either one will work fine.
I thought you should use the prime after texture..
I do a lot of drywall patches for my business. The customer pays me by the hour, they are never thrilled when they learn the wall or ceiling needs to be primed first. So a few years ago I tried something that I figured I’d share with you. So how I deal with the inconsistency of texturing drywall and mud and previously painted walls is instead of priming, I turn the pressure way up on my gun, then I spray a fine mist of texture on the patch and on the surrounding drywall. I then let that dry by aiming a fan on the area to speed things up. ( or just let it dry naturally) After the whole area to be textured Is dry and has turned white, I now will start the actual texture process.
Works like a charm. And it helps blend in the new texture with the old even better. It is 100% undetectable. But on a large ceiling like you’re doing I’d probably primer it??? But if the customer was wanting to save money I’d mist it all, then texture. This method works especially well in a kitchen or bathroom environment where it’s been painted in semi gloss. Don’t be afraid lol cause it sounds like it could go wrong, but it won’t. If you do drywall patches for work or even at home this tip will save time, money and it’ll come out looking perfect every time.
The fine mist takes the place of the primer to make everything the same surface to be textured upon.
Good to know. I also primer drywall before applying mud for wet sanding purposes so i dont burn through paper.
Do you need to primer the bare drywall before applying the thinned out mud mixture?
I would.
Perfect!
I long is the wait before o knock it down ?
At least 5 min. But sometimes it really varies. It depends how Warm or cold it is, how much humidity there is etc. All this can affect how fast it dries or stays wet. Just test a very small area first and that will give you an idea of how long you should wait
I have never seen a lexan shield sold at Home Depot/Lowes. Where did you get yours?
Amazon
Thanks....
Where can i get trowl like that? Having hard time finding one?
Got mine at home depot
Could I do this over wood paneling? Who ever install these darn things liquid nails them to the drywall! Maybe this will help me pinch a penny.
This is not a DIY, that's more of a semi-pro. Still good results
R u 8bit flashback
Maybe lol
you have ten dislikes from haters this video is 👍🏾
haters hate,cuz thats what haters do...they try to tear down others to make them self feel better about themselfs(funny thing is..the haters r not open to any thing new and will never b any better at ANYTHING cuz they haters, they hate there life and only care about themselfs..(sorry to go on and on about this)
Why would anybody want knockdown texture on their walls. Im here learning how to recreate this because my walls already have it. With they didnt to begin with lol
It's usually done by builders to obscure imperfections which would otherwise be visible on a large area not broken up by furniture, hanging pictures etc.