The ET115 Durability Continues to impress us! This is a flying tank! - Now with the F4 flight controller, this has to be one of the best FPV Drones designed for those who crash - either beginner or expert! Lot of upgrades, parts, here ----->graysonhobby.com/catalogsearch/result/?q=et115
still flying V1's.....115 and 125.....they are so good...have not even reached the v2's need yet.....V3 is a few years away I would assume for me...I am always years behind...normally when things start to be discontinued, I get to buy a few...LOL and yeah speed for a ET is not a want or need thing...BUT ,endurance and range sure is
Ironically somewhere near the manufacture of King Kong/LDARC quads. Seems you guys are the first to post anything on the V3, nothing else out there currently in YT!
Great video! I've been researching the FPV drones for the last week or so and this whoop looks perfect. I'm new to the hobby and the smaller form factor with the prop guards looks a lot more forgiving for learning to maneuver one of these. I eventually want to get into a 5" FPV drone of some sort so I'm willing to go ahead and spend a little more money on a radio and goggles even just getting into it instead of getting something like the EMAX bundle and ending up upgrading everything later anyway. I really like the FRSKY X-Lite controller and figure I can likely get a good set of goggles for around another $75-100 USD. I just wish I had done a little more research because I did go another route with an Eachine E511S for a beginner drone for myself. I do like it and it got me up in the air and flying a little, but these FPV drones look like more of what I'm looking for. I did accumulate and ISDT Q6 Pro, a parallel charging board, a battery checker and some other small accessories that I'll still be able to use, but it looks like the Eachine drone may have been a mistake now that I'm learning more about the drones. At least I know I do like the hobby and it definitely wasn't my most expensive wrong life choice that I've made. LOL I also saw that you are a Veteran owned business, so you can count on this fellow Veteran purchasing my new set up from you! Any suggestions or recommendations are welcome also. I've also looked at the Mobula 7, the King Kong Tiny GT7 the King Kong ET125 and the EMAX Tinyhawk 2S. Thank you in advance for your time.P.S. I did watch your "Top 5 mistakes...." video also. :-)
I’ve been wanting one of these for so long! Every time I finally saved up just enough something happens depleting my funds (grrr...) one of these days maybe I’ll FINALLY get one and into fpv finally! Awesome video Grayson crew!🤘😊🤘
Sleeping Bear Hello and good advice! I originally started with the Eachine E010 and graduated to the Bwhoop B03 Pro. Dedicated myself to perfecting LOS and throttle control and decided to try acro with the XK X100 with the upgraded XK X7 TX. Over the past several years slowly obtaining cheap yet reputable models whenever I can including a few of the HS150 Bee and Bugs3 models. Love every one off my quadcopters! However I find myself more impressed with the agility, speed and efficiency of my HS150 vs my bugs. ***shrugs***
@@rickrachelvanvliet6821 I put my bugs away..acro birds tend to break easier because they flying so fast!! Got a king kong. Should have skipped and built my own. Finding good frame important! One with arms you can replace. Not unibody designs. I fly like I stole them though lol
Sleeping Bear that’s another good point I keep looking over regarding a good quality frame with replaceable arms! I’ve given serious consideration into building one (I’ve been really researching the Tyro 79 or Tyro 99) but somewhat intimidated by the process. And regarding flying like you stole it! 🤘😁🤘 that’s where I wanna be!
@@rickrachelvanvliet6821 wrecks cost..but decent frame cuts It back allot. Bendable props dont break near as easy. Building easy. If you can solder. Good solder..clean tip..paste flux.. right temp on soldering iron. Need adjustable iron. Have a smoker too. But any wreck can fry esc..or mess up motor. Or break camera. 90% of wrecks just break a prop. Messing up camera rare if kill it..disarm then esc last. Moters tuff but I've bent housings. Shaft. Motors where out. precaution goes a long ways after ever wreck check bird. Tighten screws look over bird basically. Lose wires and such
I have been running 1105 motors with a F4 and Avan props for a couple of months now. The 1105s help when running a HD cam. The Avans are smoother flying. I get about 4.5 minutes flight with Tattu 650mah 3S. I finally broke the tip of the receiver antenna off, so I added a RSSI receiver last night. Can you get just the V2 body(without the V1) up for sale? I tend to go through a lot of bodies. One more thing, Palmolive dish soap works fantastic for cleaning grass off the prop guards.
I really like my Et115 v2, it’s a great quad to have fun with, I wished KK would perhaps consider the V4 of this quad, with a much better camera! Not that this is terrrible, but maybe something with a little less fisheye, and a higher resolution would just make this so much better!
I stuck on my v2 a 700 mAh from HK and it work wonders and I fly for about 5 to 6.5minutes … I now converted to HD with a Runcam Split mini mini V2 … lets see.
Gday Will and Basil great vlog as always its been to long since the last one, nice door testing Will, keep them coming are you guys going to test the new diatone 6s?
Hey guys... I'm from Brazil and also have a RUclips channel focused on Drones... I'm here in Florida and would like to know if you'll be there this weekend? I'm driving now from Miami to Orlando to visit a friend of mine and would like to drive a few more hours on Friday to Atlanta where my wife has friends to. Would love to meet you guys. Regards, Lello
Hope u don’t mind but its a question I can find the answer to, can u use 3s on Tachyon T1104 9500KV motors? I know u both will know the answer to this, love your channel big time.
Glad they used BetaFlight OSD, instead of the custom "smart OSD" of the GT7 series. Flight times could be a bit better, 4 minutes with about murdering the battery, isn't very impressive. It does seem to fly nice though.
Well it can take a crash!!!!! Thats what i need LOL!!! All i do is crash!! Great Channel & Great Review!! 👍😀👍 Man i love drones!!! They make me so happy!!!! Flying is when i am most happy!!!! Unless im spending time with my baby girl!!! She is more fun!!! But also a lot more work hahahaha!!!!!
The ET115 Durability Continues to impress us! This is a flying tank! - Now with the F4 flight controller, this has to be one of the best FPV Drones designed for those who crash - either beginner or expert!
Lot of upgrades, parts, here ----->graysonhobby.com/catalogsearch/result/?q=et115
Both ET115 and the ET125 are great drones, out of the box they're both very well tuned
still flying V1's.....115 and 125.....they are so good...have not even reached the v2's need yet.....V3 is a few years away I would assume for me...I am always years behind...normally when things start to be discontinued, I get to buy a few...LOL and yeah speed for a ET is not a want or need thing...BUT ,endurance and range sure is
Awesome quads....v2 here. Hey guys! Hope summer is treating you well.
Turtle mode got me out of tree once..? Great show guys! And great company!! If dont order from should. God bless
hey thanks for the kind words!
@@graysonhobby thank you guys!! Jan here..pronounced Yawn. Lol I'll back you guys like you backed me..
Waiting for the V3 to be released out my neck of the woods. Seems like a bigger fun quad for cruising. Like how you see the ducts and props.
Were is your neck of the woods?
Ironically somewhere near the manufacture of King Kong/LDARC quads. Seems you guys are the first to post anything on the V3, nothing else out there currently in YT!
Clearance Clarence, that was funny.
Great video! I've been researching the FPV drones for the last week or so and this whoop looks perfect. I'm new to the hobby and the smaller form factor with the prop guards looks a lot more forgiving for learning to maneuver one of these. I eventually want to get into a 5" FPV drone of some sort so I'm willing to go ahead and spend a little more money on a radio and goggles even just getting into it instead of getting something like the EMAX bundle and ending up upgrading everything later anyway. I really like the FRSKY X-Lite controller and figure I can likely get a good set of goggles for around another $75-100 USD. I just wish I had done a little more research because I did go another route with an Eachine E511S for a beginner drone for myself. I do like it and it got me up in the air and flying a little, but these FPV drones look like more of what I'm looking for. I did accumulate and ISDT Q6 Pro, a parallel charging board, a battery checker and some other small accessories that I'll still be able to use, but it looks like the Eachine drone may have been a mistake now that I'm learning more about the drones. At least I know I do like the hobby and it definitely wasn't my most expensive wrong life choice that I've made. LOL I also saw that you are a Veteran owned business, so you can count on this fellow Veteran purchasing my new set up from you! Any suggestions or recommendations are welcome also. I've also looked at the Mobula 7, the King Kong Tiny GT7 the King Kong ET125 and the EMAX Tinyhawk 2S. Thank you in advance for your time.P.S. I did watch your "Top 5 mistakes...." video also. :-)
I’ve been wanting one of these for so long! Every time I finally saved up just enough something happens depleting my funds (grrr...) one of these days maybe I’ll FINALLY get one and into fpv finally! Awesome video Grayson crew!🤘😊🤘
Start cheap..I started with 140 dollar set up..bugs3 cheep box goggles. Vtx camera. Had a blast. Now learning acro!
Sleeping Bear Hello and good advice! I originally started with the Eachine E010 and graduated to the Bwhoop B03 Pro. Dedicated myself to perfecting LOS and throttle control and decided to try acro with the XK X100 with the upgraded XK X7 TX. Over the past several years slowly obtaining cheap yet reputable models whenever I can including a few of the HS150 Bee and Bugs3 models. Love every one off my quadcopters! However I find myself more impressed with the agility, speed and efficiency of my HS150 vs my bugs. ***shrugs***
@@rickrachelvanvliet6821 I put my bugs away..acro birds tend to break easier because they flying so fast!! Got a king kong. Should have skipped and built my own. Finding good frame important! One with arms you can replace. Not unibody designs. I fly like I stole them though lol
Sleeping Bear that’s another good point I keep looking over regarding a good quality frame with replaceable arms! I’ve given serious consideration into building one (I’ve been really researching the Tyro 79 or Tyro 99) but somewhat intimidated by the process. And regarding flying like you stole it! 🤘😁🤘 that’s where I wanna be!
@@rickrachelvanvliet6821 wrecks cost..but decent frame cuts It back allot. Bendable props dont break near as easy. Building easy. If you can solder. Good solder..clean tip..paste flux.. right temp on soldering iron. Need adjustable iron. Have a smoker too. But any wreck can fry esc..or mess up motor. Or break camera. 90% of wrecks just break a prop. Messing up camera rare if kill it..disarm then esc last. Moters tuff but I've bent housings. Shaft. Motors where out. precaution goes a long ways after ever wreck check bird. Tighten screws look over bird basically. Lose wires and such
I have been running 1105 motors with a F4 and Avan props for a couple of months now. The 1105s help when running a HD cam. The Avans are smoother flying. I get about 4.5 minutes flight with Tattu 650mah 3S. I finally broke the tip of the receiver antenna off, so I added a RSSI receiver last night. Can you get just the V2 body(without the V1) up for sale? I tend to go through a lot of bodies. One more thing, Palmolive dish soap works fantastic for cleaning grass off the prop guards.
I really like my Et115 v2, it’s a great quad to have fun with, I wished KK would perhaps consider the V4 of this quad, with a much better camera! Not that this is terrrible, but maybe something with a little less fisheye, and a higher resolution would just make this so much better!
I have the v1 of this. Love it! Just published a video of my crashes with it. Not a single broken prop
Excellent review guys, thanks!
I stuck on my v2 a 700 mAh from HK and it work wonders and I fly for about 5 to 6.5minutes … I now converted to HD with a Runcam Split mini mini V2 … lets see.
Gday Will and Basil great vlog as always its been to long since the last one, nice door testing Will, keep them coming are you guys going to test the new diatone 6s?
Hello Will and Basil. Love the channel and Grayson Hobby is awesome! I just purchased the LDARC ET125 V3. Any suggestions on props?
Hey guys... I'm from Brazil and also have a RUclips channel focused on Drones... I'm here in Florida and would like to know if you'll be there this weekend? I'm driving now from Miami to Orlando to visit a friend of mine and would like to drive a few more hours on Friday to Atlanta where my wife has friends to.
Would love to meet you guys.
Regards,
Lello
Hope u don’t mind but its a question I can find the answer to, can u use 3s on Tachyon T1104 9500KV motors? I know u both will know the answer to this, love your channel big time.
Glad they used BetaFlight OSD, instead of the custom "smart OSD" of the GT7 series. Flight times could be a bit better, 4 minutes with about murdering the battery, isn't very impressive. It does seem to fly nice though.
Hey thanks for watching
There is always a trade off Strength vs weight.
Be nice if your website would let you browse your inventory.
Is it your own build? On the website of LDARC there is still only V2
Well it can take a crash!!!!! Thats what i need LOL!!! All i do is crash!!
Great Channel & Great Review!!
👍😀👍
Man i love drones!!! They make me so happy!!!! Flying is when i am most happy!!!! Unless im spending time with my baby girl!!! She is more fun!!! But also a lot more work hahahaha!!!!!
ha - im not sure what is more work, babies or building quads!
Would the avan 2327 props work on the V2 or just V3? If not, is there an Avan prop suitable for yhe V2?
Im buying something from ya soon.
So how did the larger battery do?
Has it never been released? Cannot find it anywhere:(
Graysonhobby sells the custom V3
Would this mount work with a caddx turtle mini v2?
What mount...lol
I have the Mavic 2 but never flown FPV drone this drone is RTF can give me more information. Thank you
Hi We do offer a customized RTF combo -
@@graysonhobby you have Link to buy
It’s a webble wabblr. Won’t fall down. Lol
Wow
Cool comes with cat feet.
Its sould out 😥