I had bad lighting and had to open up that aperture to the maximum. Also, my camera doesn't have autofocus, so that didn't helped either. Got myself a new LED panel. The next videos should be better quality.
do you know what size the input is on the receiver? it's not 1/8", it's smaller. i need to get a household to one of those plugs, to use with my quantum flash.
Thanks for this video. I have a question. Can you access the External Flash Function Settings in the camera to control the speed lights or just the Built-in Flash Settings?
Hi there can you help. The triggers are communicating with each other well. But my 480ii speed light is not flashing. I tried putting it into slave mode still no luck. Tried different channels on the triggers as well. Can you help?
Mine wasn't either. For me, I needed to make sure the flash was in M mode and the red part of the flash was facing the channel switches on the receiver. Now mine works.
The recycling/recharging time is actually on the flash, not the trigger. The trigger works continuously if your flash doesn't have a big recharging time. Most likely it will not work for Sony, cause, from what I know, they are a different hot shoe.
It's not very clear in the video, cause of the depth of field, but you can see at 1:14 that I remove the plastic that separates the small batteries from the metal contact of the transmitter. So, yes, it needs batteries.
@@TerryScreen If you are trying to connect the transmitter to another flash that has it's own receiver system, I don't think that will work. I believe I miss understood the question above. The easy answer is yes, it will work with any flash that has a standard hot shoe, but you will need both the transmitter and the receiver to be from Godox.
One question, I already have a Neewer FC-16 transmitter/receiver kit. Can I buy this one to use it together, as one kit, like using the neewer (or the godox) transmitter on my camera and this two godox receivers + my neewer one?
Hi mine stopped working, please help. The trigger fires but the flash doesn't fire, despite it being on the same channel. Maybe i am missing something?
@@djdinger2817 Hi, i had to replace the batteries... I did that and plugged it into the camera with a sync wire. I pressed the test button and it started working again. Makes sure its on and on the same channel and it should work
Хобби
Explaining the assembly REALLY would help.
Works great with my 20+ year-old JTL 300 D's.
funny you shot a video about photographic stuff and it's mostly out of focus. anyway it helped.
I had bad lighting and had to open up that aperture to the maximum. Also, my camera doesn't have autofocus, so that didn't helped either. Got myself a new LED panel. The next videos should be better quality.
do you know what size the input is on the receiver? it's not 1/8", it's smaller. i need to get a household to one of those plugs, to use with my quantum flash.
Tks brooo 👌
Thanks for this video. I have a question. Can you access the External Flash Function Settings in the camera to control the speed lights or just the Built-in Flash Settings?
I don't think you can change the settings of an external flash. Basically it is just a trigger.
Is it working for godox flash tt520 II ?
Será q ele funciona na canon SL3 ? pq alguns flash não pegam nela
Can you do second curtain flash with this?
Thank you for this presentation. May I ask, have you tested the operating range, outside and inside?
No, but that's actually a very good idea. I will test it this weekend.
@@DailyCoolGadgets do i need to put battery on transmiter?
@@huntepic6325 Yes
I JUST FOLLOW THE INSTRUCTIONS BUT MINE DOS NOT SEEM TO WORK, WHEN I PULL THE TRIGGER OF THE CAMERA
is it compatible with triopo speedlight tr982ii?
I have a question. I see you have two speedlites hooked up; how many speedlites can you hook up to shoot at once? Is there a limit?
I don't think there is a limit
can you use it without the flash? so I'll use it just to trigger the shutter. is that possible?
It is just for flash trigger. It's not a camera remote control.
i was wondering how long these bateries last? more or less..
I can´t use them with my 70D Canon. Can you help me with the settings configuration, please?
yes..
this trigger support on nikon d610 body
Hi there can you help. The triggers are communicating with each other well. But my 480ii speed light is not flashing. I tried putting it into slave mode still no luck. Tried different channels on the triggers as well. Can you help?
Mine wasn't either. For me, I needed to make sure the flash was in M mode and the red part of the flash was facing the channel switches on the receiver. Now mine works.
Hi. Thank you for our video.
Would a GODOX FT-16 (433Mhz) transceiver trigger this CT-16?
Looking froward to your reply.
Thank you. God bless you.
Do you make same adjust in your canon camera??
Nope. Everything works because it has a standard hot shoe.
Does this godox trigger works to godox speed light only?
This works with any flash with hot shoe
I bought this trigger new but it does not work
It sounds like it has some kind of recycle time to shoot again? Will this work on a Sony a7iii? Can you tell me pls?! Thank you so much
The recycling/recharging time is actually on the flash, not the trigger. The trigger works continuously if your flash doesn't have a big recharging time. Most likely it will not work for Sony, cause, from what I know, they are a different hot shoe.
Full power shots takes time to recycle, also depends on type of batteries.
Can ct16 be triggered with elinchrom triggers?
Not sure about that.
Anybody have an idea how to change the battery on the transmitter?
I just uploaded a short on my channel showing you how you can remove the battery and what type of battery you need for the transmitter.
Can I use it on my lumix Dc-gx9 ?
If it has a standard flash shoe, the I don't see why not.
Is it compatible with canon eos 1200d?
It should be, yes
does the transmitter needs battery?
It's not very clear in the video, cause of the depth of field, but you can see at 1:14 that I remove the plastic that separates the small batteries from the metal contact of the transmitter. So, yes, it needs batteries.
Can i use 1 ct-16 and 2 triggers at once?
If they are setup on the same channel, I don't see why not.
Can this trigger connect to other flash like yongnuo flash?
No, I don't think so
@@DailyCoolGadgets You said in an answer above this works with any flash. So which is it?
@@TerryScreen If you are trying to connect the transmitter to another flash that has it's own receiver system, I don't think that will work.
I believe I miss understood the question above.
The easy answer is yes, it will work with any flash that has a standard hot shoe, but you will need both the transmitter and the receiver to be from Godox.
One question, I already have a Neewer FC-16 transmitter/receiver kit. Can I buy this one to use it together, as one kit, like using the neewer (or the godox) transmitter on my camera and this two godox receivers + my neewer one?
@@carlosalberto8533 I have no idea if that will work.
Does it support TTL?
Bro decided not to talk the whole video
Hi mine stopped working, please help. The trigger fires but the flash doesn't fire, despite it being on the same channel.
Maybe i am missing something?
I'm not sure how to help you. Mine are working fine and never had any problems besides changing batteries when needed.
Did you find out what the problem was?
@@djdinger2817 Hi, i had to replace the batteries... I did that and plugged it into the camera with a sync wire. I pressed the test button and it started working again. Makes sure its on and on the same channel and it should work
@@blessingblazedmbalakablazedtv did you have to leave the sync wire or after started firing back to wireless?
@@blessingblazedmbalakablazedtv also changed batteries in the trigger or flash? Thx
Pull your camera back man. The focus is terrible
is it working with fuji xt3?
Not sure about that. If it has a standard hot shoe, it should work just fine.
Is it compatible for godox tt600s and sony a6000
Not sure. You should contact Godox and ask them.
Kiya ye 200d mark 2 me chale ga kiya