Week 20: Get Clean, Sharp, Embroidery Results

Поделиться
HTML-код
  • Опубликовано: 20 ноя 2024

Комментарии • 94

  • @michelehoward2391
    @michelehoward2391 Месяц назад +1

    @Romero threads this tool is perfect. I bought a used machine and moved it about 200 miles. Needless to say, it needed tension set up for all threads. I tried many things and other videos that kind of worked. This resource got me to perfect tensions. Thank you!!!!

  • @roller9158
    @roller9158 Год назад +3

    Never thought of having a separate bobbin case (Tension) for caps and resetting top tension. Here I thought one setting for everything. Thank You, Great video.

  • @michelehoward2391
    @michelehoward2391 Месяц назад

    This video is so helpful and Your pdf charts are a life-saver! The advice to use the TOWA for the bobbin only plus your charts...I finally can adjust my tension and get best results. Thank you!

  • @shoponeighteeen
    @shoponeighteeen 7 месяцев назад

    Solid video right here with some nice visuals. I completely reset all my tension knobs and followed along with the steps. I had to do some minor adjustments with a couple of needles and now everything is DIALED. Will defiantly recommend this video to anyone experiencing tension issues. Thanks, Romero 👊🏼

  • @soniahenderson4208
    @soniahenderson4208 Год назад +1

    thank you much for this video. I have had my Ricoma EM1010 for a while now, haven't been able to use it because of the tension. This video makes it easier to do.

    • @RomeroThreads
      @RomeroThreads  Год назад +1

      Thank you Sonia! Glad the video helped.

  • @noranevers
    @noranevers 7 месяцев назад

    Watching the replay from Chelem, Yucatan, Mexico - originally from Texas - good to see all of the Tejas folks on.

  • @Cmakoman
    @Cmakoman 2 года назад +2

    Thank you so much for all that you share with us. I am new to Embroidery, and I need to learn every day. I watched this video TWICE! FANTASTIC !!!!

  • @gailhardock1206
    @gailhardock1206 2 года назад +2

    Hi from Cochrane, Alberta CANADA. I usually catch your replays. I don't do a tension test often enough I know that. When I do my test stitch out and if the tension looks off then I do a tension test.

  • @mbb5496
    @mbb5496 2 года назад +1

    please make video on threads selection and what should we watch out for, for diff type of embroidery eg cap, tshirt, sweatshirts

  • @ianmcara9838
    @ianmcara9838 6 месяцев назад

    loved this video. So helpful. Really helped me understand the detail needed to get it set up right. Thank you for all your great work.

  • @theresas.439
    @theresas.439 2 года назад +2

    Fantastic video. A subject I never understood before, so your instruction is greatly appreciated. Thanks!

  • @dreamarogers294
    @dreamarogers294 Год назад

    Thank you so much for the video. I have the correct tension on my Janome machine 550e!

  • @callegra1
    @callegra1 2 года назад +2

    Thank you Ever for this video, I have learned something new.

  • @sweetp1015
    @sweetp1015 Год назад

    Thanks for this video. I have single needle machines now but waiting for my multi needle to come in. The tension knobs were a mystery to me. Now I feel like I know exactly what to do now. Thanks so much.

    • @RomeroThreads
      @RomeroThreads  Год назад

      Glad it was helpful! Congrats on your new machine.

  • @ireeshafox6075
    @ireeshafox6075 2 года назад +3

    Thank you!!!! This video was really helpful especially for a beginner 🙌🏽

  • @renabradshaw1597
    @renabradshaw1597 Год назад +1

    I hated my machine, but thanks to this video, I understand the I test and I believe this could have been the main problem.

    • @RomeroThreads
      @RomeroThreads  Год назад +1

      Hello, yes, usually as long as the tension is good and your machine is all threaded correctly, it should run fine. Thanks for the comment.

  • @MAC35REM
    @MAC35REM 2 года назад +3

    Thank you!!! I learned so much from this video. ❤️

    • @RomeroThreads
      @RomeroThreads  2 года назад

      Thank you Mali! Im glad you enjoyed the video.

  • @princessss42
    @princessss42 2 месяца назад

    Hi Romero , thanks so much for this video ! I’m wondering if you need a special bobbin case for the magnetic bobbins? Can you just remove the spring from the bobbin case that the machine comes with ?

  • @bridgetgainous3196
    @bridgetgainous3196 2 года назад +1

    Great video. Is the Superior Threads L-Style Towa Bobbin Tension Gauge - Measuring Tool only for magnetic bobbins?

  • @princessss42
    @princessss42 2 месяца назад +1

    Romero what If you don’t have a visible screw on your knobs and you only have a cap like screw ? How do you know when it would be flush with the screw ?

  • @dorothyjones3945
    @dorothyjones3945 8 месяцев назад

    I had my machine sonce Oct 2023 and had nothing but problems with this 1010 embroidery machine. Took me the longest ti finish my training cuz of thread breaks, needle break and now tebsion problems i was ready to give it back. I only completed the training and one cap now having thread breaks with every needle now trying to do a tension test and now my pattern is out if the hoop area.

  • @zehcnas1008
    @zehcnas1008 2 года назад +1

    A book, yes!

  • @djpeeweep
    @djpeeweep Год назад

    All for science! I love it thank you for this video!

  • @PedroSanchez-fh8vk
    @PedroSanchez-fh8vk 2 года назад +2

    Romero qué tal, crees que nos puedas dar unas clases en español?

  • @aceboogie959
    @aceboogie959 2 года назад +2

    Hi,
    One quick question :" lets say they bobbin is to tight and we see a lot of upper thread on the backside of the embroidery. If the stitch out looks good, why should i adjust it"
    Till now i didn't find a person to answer this question for me.
    Btw, i love your work. I kbow machine embroidery is a niche and i assume you don't get much money out of the videos but i need to let you know that your work is very valuable to many of us.
    Much love from
    Berlin, Germany

    • @RomeroThreads
      @RomeroThreads  2 года назад +1

      Thank you for the comment Ace. As long as your top stitches look fine and the bottom isn't bunched up, then your good to go. Of course in a perfect world, everything will be spaced out evenly.

    • @aceboogie959
      @aceboogie959 2 года назад +1

      @@RomeroThreads thx for taking your time to answer me

  • @irmagomez3941
    @irmagomez3941 2 года назад +2

    Thank you for posting these videos!! They are really helpful! I am having trouble with thread breaks and nesting when embroidering small letters (its always the same needle as I only have one dedicated for small lettering). I ran the tension test and it looks good so I am baffled on what to do. I am using a 60 weight thread and a 65/9 needle. I also rethreaded that needle to see if maybe it wasn't threaded correctly. I'm using the Madeira thread.. and I've tried a different brand to make sure that it wasn't the thread that was an issue. Do you have any suggestions for trouble shooting?

    • @RomeroThreads
      @RomeroThreads  2 года назад

      Yes, make sure the needle is facing the correct direction. That would be my best guess. Slow the machine down, and look up and down and see if the thread is catching on anything throughout the path.

  • @dianematheis7666
    @dianematheis7666 Год назад +1

    Diane Matheis, NC

  • @ShantaSmith
    @ShantaSmith Год назад

    THANK YOU, YOUR VIDEO IS WAY BETTER THAN RICOMA TUTORIALS, APPRECIATE YOU BROTHA

  • @jamesreese6428
    @jamesreese6428 6 месяцев назад

    Good morning , NC

  • @irmaledezma
    @irmaledezma Год назад +1

    Hello,
    I was thinking of your book maybe you could have a chapter regarding the differences between one-the softwares from the beginner friendly to the most advance and two the difference between each JPEG-DST Est… Three what machine goes to which files (the dst png est) I’m still learning that process, at the beginning of this Journey(embroidery ) I had no idea of the different files and their application.

    • @RomeroThreads
      @RomeroThreads  Год назад

      Great Idea, I'll make note of this and make a video on this topic.

  • @mark.serigrafia
    @mark.serigrafia Год назад

    Thanks from Italy! 🙏

  • @davidsims6585
    @davidsims6585 7 месяцев назад

    You differentiate bobbin tension for flats and 3d puff hats, what about a normal 112 richardson cap? Not 3d puff? I read around 21-23?

  • @kathybaggett4062
    @kathybaggett4062 Год назад

    Good morning from Georgia

  • @bigdap100
    @bigdap100 2 года назад +1

    Great channel.👍✅

  • @callegra1
    @callegra1 2 года назад +1

    Hi Ever, in the video I heard you say to "run the I test without putting the thread thru the pigtail in the bobbin"? Is this for the actual run on the machine? or just to test the tension using the TOWA tool? I am using the TOWA bobbin tension tool. I've had it for months! lol

    • @RomeroThreads
      @RomeroThreads  2 года назад

      Hello, thank you for the message. Thats only for the Towa gauge where you don't put it through the pig tail to get an accurate reading. Once its in the machine, yes, put the thread through the pig tail.

  • @allegrachannel5422
    @allegrachannel5422 Год назад

    Thanks for video...great work. What type of bobbin thread do you use?

    • @RomeroThreads
      @RomeroThreads  Год назад

      Filtec Magnetic bobbins

    • @allegrachannel5422
      @allegrachannel5422 Год назад

      @@RomeroThreads Ok, thanks for responding. Could you please tel me what type of underthread or bottom thread do you use? Can I use regular sewing cotton thread as bottom thread? Thanks.

  • @natalieamezola2922
    @natalieamezola2922 11 месяцев назад

    THANK YOU FOR YOUR VIDEOS

  • @mhmosthated8697
    @mhmosthated8697 Год назад

    Heyy for hoodies and SweatPants should I keep tension at 200

  • @Ltscoobydoo
    @Ltscoobydoo Год назад +1

    Hello and thank you for this video and all that you do the help out the embroidery community. I did an I test, and what does it mean when there's more top thread on the left side than the right? (ie instead of the back showing 1/3 of each, it's showing more top thread on the left side than the right. Hopefully this makes sense😫.

    • @RomeroThreads
      @RomeroThreads  Год назад +1

      That can happen, you can ensure the bobbin housing is completely clean. But if its just a bit to the side, it wont affect the stitching.

    • @Ltscoobydoo
      @Ltscoobydoo Год назад

      @@RomeroThreads thank you!!

  • @LSTRND1
    @LSTRND1 Год назад +1

    What if you have too thick bobbin on all needles but when you tighten your bobbin but the bobbin case is too high using the towa?

  • @irmaledezma
    @irmaledezma Год назад

    What kind of oil should we purchase for Ricoma embroidery machine and where should we oil the machine?

  • @elinasila
    @elinasila 2 года назад +1

    Hi! Culd you please help me? After a new tentien test and all nops down like in the one from your live videos and up the nops, the machine left about two inches long thread after cutting. What should I doo to fix it? Thank you!

    • @RomeroThreads
      @RomeroThreads  2 года назад +1

      Hello, 1st make sure your tension is set good. If its good, you can adjust your thread tails with the settings on the machine.

  • @smilehappychild
    @smilehappychild 2 года назад +1

    Thank You!

  • @LeJean_Dennis
    @LeJean_Dennis 2 года назад +1

    Thank you

  • @dorothyjones3945
    @dorothyjones3945 8 месяцев назад

    Hello I'm using a b hoop how do i get the design inside the hoop of a 1010 embroidery machine and my panel si so much different from yours

  • @SansoneJacobs
    @SansoneJacobs 6 месяцев назад

    Sansone Jacobs from George, South Africa

  • @DevinDiaz8
    @DevinDiaz8 Год назад

    Is the I test you did on the cap examples a special file or just the same as the flats I test?

  • @NathanielParkinson
    @NathanielParkinson Год назад

    Is the I-test for puff different than the I-test for flats? Or can I use the same one? Very helpful video, thank you so much!

    • @RomeroThreads
      @RomeroThreads  Год назад

      Ideally, you would want an I-test that has more density (0.18mm) and end caps. That way, when you remove the puff, it gets perforated correctly. Worst case scenario, you can use this same I-test, you just wont pull the puff smoothly.

  • @irmaledezma
    @irmaledezma Год назад

    YOU ARE FANTASTIC THANK YOU

  • @gericook6030
    @gericook6030 Год назад

    Hello from Peru Illinois

  • @ConnieVazquez-l5l
    @ConnieVazquez-l5l 9 месяцев назад

    What is good bobbin tension for regular hats?

  • @apostlelinda331
    @apostlelinda331 Год назад

    Hello I am having a huge problem I cant get my machine to sew out even the test nothing shows up when some of my needle try to sew

  • @SALWAMD
    @SALWAMD 7 месяцев назад

    Hi, Romerio, I just received my BAI Embroidery 15-needle machine and I have set it up. I did a first embroidery test HHHH with multiple color threads, but it is only working with one needle and one color. After completing one letter, it stops and when I start again, it continues with the same color on needle number one. Can you please advise me on what I have done wrong?

    • @RomeroThreads
      @RomeroThreads  7 месяцев назад

      Make sure your design is set for 15 H’s with different colors. And you set 15 colors on the machine.

  • @davidsims6585
    @davidsims6585 7 месяцев назад

    also could you put your I test for caps?

  • @aerials4028
    @aerials4028 9 месяцев назад

    1-19 check , “ Here “ .

  • @kathybaggett4062
    @kathybaggett4062 Год назад

    How do you run a eye test for tension on a EM 1010 ? I just got my machine and went through the training but did not show about how to do the eye test

  • @JWGasner
    @JWGasner Год назад

    Thanks!

  • @vonniemuniain5315
    @vonniemuniain5315 Год назад

    thank you!!

  • @kathybaggett4062
    @kathybaggett4062 Год назад

    My em1010 doesn’t have screws

  • @debbiequarles645
    @debbiequarles645 Год назад

    Where can I get the tension downloads

  • @hustleletters8159
    @hustleletters8159 2 года назад

    What is the biggest size that can be done on the front of a hat centered like a normal hat

    • @RomeroThreads
      @RomeroThreads  2 года назад +1

      The biggest size Ive done is 3.25" high. I usually keep it at 2.5" high for my hats.

  • @carinabam5833
    @carinabam5833 6 месяцев назад

    how do you get your bobbin thread in the middle mine is off to one side?

    • @RomeroThreads
      @RomeroThreads  6 месяцев назад

      I would clean out the entire bobbin housing. Something is making it off shift.

  • @VEINTI.8
    @VEINTI.8 Год назад

    how do you you the i test for a hat structure hat , example like yupoongs, flexit 110, richardson . would we run the i test on a hat ?

    • @RomeroThreads
      @RomeroThreads  Год назад +2

      Hello, yes, I would. I have ran a 3d puff I test to test for hats. I’ll put that video on my to list, that would be a good topic to talk about, thanks for your question.

    • @VEINTI.8
      @VEINTI.8 Год назад

      @@RomeroThreads awesome i guess that would be something , i have the biggest issues with hats always pain.

    • @VEINTI.8
      @VEINTI.8 Год назад

      @@RomeroThreads so i set up my hat and i am doing the I test on it, also the file you proved fits perfect with the exception to 6 colors that didn't fit. but it's all good. hopefully i can get this ricoma dialed in

    • @RomeroThreads
      @RomeroThreads  Год назад +1

      Yea, you can delete the ones that don’t fit. Let me know how it goes.

    • @VEINTI.8
      @VEINTI.8 Год назад

      @@RomeroThreads do you have a video on press foot gap on ricoma for structure hats ?

  • @tammieunruh6453
    @tammieunruh6453 4 месяца назад

    Can I get a question answered ?

  • @mariannabornman2227
    @mariannabornman2227 10 месяцев назад

    Marianna from Windhoek Namibia.

    • @RomeroThreads
      @RomeroThreads  10 месяцев назад

      Hello Marianna, welcome to the class.