My 2017 370z has a misfire issue rn and I just got it tuned lol. I changed the plugs out but when I go to hard accelerate it doesn’t wanna go anywhere. I noticed a coil pack was rattling a little so I bought an oem replacement. My car only has 20k miles the other ones look good so hoping that will fix it. And I ordered the valve cover gasket cuz mine just started leaking. Hopefully after these two things it gets back to being the v8 killer it’s been.
Were you ever able to diagnose the misfire? I have the same issue and I just bought all new spark plugs, coils and I found that Cylinder 3 had quite a bit of oil in it, so I am now going to order and replace the spark plug gaskets as well as the valve cover gaskets, along with all of the gaskets when removing all of the parts. Would like to know what you found out and what was causing the misfire? Thanks!
Just did my plugs today and had slight oil gunk in all the driver's side 3. Gonna have to break it all the way down and do this soon. What type silicone you using or suggest?
Hey bro, my 114k miles 2010 370z nismo still have CEL on due to code P0300 with high idling at 1000 rpm even after an oil change, new spark plugs, welded a crack in the catalyst converter, new exhaust pipe gaskets. Yesterday I replaced camshaft sensors, cleaned MAF sensors and P0300 is still on plus new code P0011 bank 1. The car was in a sluggish limpy mode and couldn't go pass 2500 rpm after that. Then I reset CEL and it's drivable now and it could go pass 2500 rpm but CEL is still on and flashes sometimes. Any idea what's wrong? Thx.
Cambia los Ignition Coils, estaban llenos de aceite, no mames compra los 6 nuevos en Z1performance y ya que estas ahí también tendrías que haber cambiado el valve cover, se que es mucho dinero, pero así te dejas de pendejadas y lo arreglas bien.
No son Los coils , ya lo aregle Los valve covers no Los tienes que cambiar solo Los gaskets , yo espesalicio en estos caros , era mi timing que no estaba buien por eso tenia el misfire , pero ya lo aregle , gracias
@@fahadalshuaibi2610 he was telling him to change the ignition coils and valve cover gasket to not risk oil in the spark plugs again, it’s a lot of money but it’s better to get the job done right the first time
Your homie really doing his thing like he has done this numerous of times. Great video
Great video! Just lay off the curse words! You’re very knowledgeable mechanic, and you got a great content!
That's his personality my man. You can't change people personality. This is why the world tend to go straight to violence. Superiority is real!
I REALLY wished you filmed the swap of the water pump. Please post if you have it!
My 2017 370z has a misfire issue rn and I just got it tuned lol. I changed the plugs out but when I go to hard accelerate it doesn’t wanna go anywhere. I noticed a coil pack was rattling a little so I bought an oem replacement. My car only has 20k miles the other ones look good so hoping that will fix it. And I ordered the valve cover gasket cuz mine just started leaking. Hopefully after these two things it gets back to being the v8 killer it’s been.
Were you ever able to diagnose the misfire? I have the same issue and I just bought all new spark plugs, coils and I found that Cylinder 3 had quite a bit of oil in it, so I am now going to order and replace the spark plug gaskets as well as the valve cover gaskets, along with all of the gaskets when removing all of the parts. Would like to know what you found out and what was causing the misfire? Thanks!
Thankx for showing the love vq❤
Just did my plugs today and had slight oil gunk in all the driver's side 3. Gonna have to break it all the way down and do this soon. What type silicone you using or suggest?
I recommend yall goo to them for your needz!!!!
Went for a valve cover replacement quality work, aint leaking no more🚀🥂
Did you figure out what was causing the misfire ?
Why was it still popping?
What fix it? I have same issue no cel and misfire
when you said oh no that was funny
I need to do a valve cover and timing cover on a q50.... ugh.
Hey bro, my 114k miles 2010 370z nismo still have CEL on due to code P0300 with high idling at 1000 rpm even after an oil change, new spark plugs, welded a crack in the catalyst converter, new exhaust pipe gaskets. Yesterday I replaced camshaft sensors, cleaned MAF sensors and P0300 is still on plus new code P0011 bank 1. The car was in a sluggish limpy mode and couldn't go pass 2500 rpm after that. Then I reset CEL and it's drivable now and it could go pass 2500 rpm but CEL is still on and flashes sometimes. Any idea what's wrong? Thx.
oil gallery gaskets possibly
@@anthonyakers6374 if you don’t know what wrong, don’t speak …..
@@anthonyakers6374 oil gallery gasket would not cause a misfire. Car would instantly go back to limp mode after clearing the code.
Change the PCV’s.
Snap on Scanner is king here
It sure is that’s why we had to get one ! Lol
@@streetdreamzperformance9008 where you get vaule gaskets ?
might still have some oil in the cylinders
Not recommended to use anti-seize on plugs. It will result in over tightening of plugs.
No it won’t if you know what your doing. It actually prevents them from seizing up if you ever have to remove them again.
Clean the throttles body they get stock it happen to my 2010 370z.
Foo you sleeping on your channel. You need to get back on and start uploading
P03 hunnid
Ir diem 😂😂
Cambia los Ignition Coils, estaban llenos de aceite, no mames compra los 6 nuevos en Z1performance y ya que estas ahí también tendrías que haber cambiado el valve cover, se que es mucho dinero, pero así te dejas de pendejadas y lo arreglas bien.
No son Los coils , ya lo aregle Los valve covers no Los tienes que cambiar solo Los gaskets , yo espesalicio en estos caros , era mi timing que no estaba buien por eso tenia el misfire , pero ya lo aregle , gracias
@@streetdreamzperformance9008 rranslate. What was the issue?
@@fahadalshuaibi2610 he was telling him to change the ignition coils and valve cover gasket to not risk oil in the spark plugs again, it’s a lot of money but it’s better to get the job done right the first time
@@streetdreamzperformance9008 What fix your issue
@@kevovq3727 I,m a year late but he said it was his timing .