How-to: Re gear a 3rd Gen Tacoma **DETAILED**
HTML-код
- Опубликовано: 12 сен 2024
- How to regear a third gen Tacoma, can also be used as reference to regear just about any other Toyota truck.
We Installed 5.29 gears in this truck running 33” tires. I’d recommend calling ECGS to see what they suggest you choose
👇🏻👇🏻
+1 (919) 672-2705
Third memeber assemblies bought from East Coast Gear Supply
Break in Procedure👇🏼👇🏼
eastcoastgears...
Thanks for watching! Please don’t forget to subscribe and also check out some of my other DIY videos!
Patches and stickers
👇🏻available at the link below!👇🏻
Adv4x4.us
You can find me on Instagram here 👇🏻👇🏻
instagram.com/adv.4x4?r=nametag
thanks for the detailed video, not many videos out there actually show us how to do this, thanks a lot
No problem! My buddy told me the same thing when he was researching about re gearing his truck so when he got the stuff ready we knew that a detailed video had to happen 👍🏼
Thanks for the detailed breakdown. Got my 2022 Tacoma headed to the shop to get this done. I don't have near the skills or tools to do this. Couple of local shops turned the job down and pointed me to Tucson Differential .. that's all they do! I have a 4Wheel Camper on my rig so it's always carrying 1100 lbs and you can tell. The truck is always shifting and cruise control is about worthless. Pretty sure this will solve my problem.
Great video but is "how to re-gear" a little misleading? You just swapped diffs. Helpful anyway though
Considering this is the most efficient and easy way to regear any Toyota. (Unless you have all the tools and the experience to back it up) I wouldn’t consider this mis leading at all! This is the route 90% of people will go 👍🏼 thanks for watching man!
I just bought these from East coast- if you can afford the core charge up front (over $3k for front and rear total w/ core) than this is the way to go. Once I ship back the cores and get the deposit back, it'll end up costing me barely $300 more than it would've to just buy the gears from nitro or Yukon. And that's without the new bearings that ECGS installed with theirs! Two weeks to the day to get it to me here in Seattle too. Awesome deal imo
Finally a video that talks about the stub shaft! Thanks
No problem thanks for watching 👌🏼
Really good how to video Buddy. Clear, concise and detailed. Your commentary is always very easy to follow.
Thanks mike! Love making them!
Thanks for this vid.....one of the best for installing/removing the 3rd gen diffs.........I will recommend it to my customers 👍👍👍👍👍
Very nice video. Well explained and super clear. Thank you for putting the time and making it.
Thanks for watching!
Awesome glad you made this detailed video. I'm waiting to receive my diffs from ecgs once I get it your video will be very handy.
Awesome! It’s a worthwhile upgrade for sure. My truck is regeared as well and it’s money we’ll spent.
Thank you, learned a lot
Excellent video. Now to find a shop in Canada to do the same.
Nicely done video, appreciate the work you put into it. Very informative
Glad it was helpful!
Very good detail. Great video
Thank you!
Thanks for the detailed vid! I my new diffs should be in soon!
No problem man thanks for watching! Good luck with the swap 👍🏼
Nice work, can this be done on a Hilux diff-lock rear
What are the advantages of regear the rear diff 🤔 and does it make a difference?
The diff housing bolts where only 18ftlbs? Also what type of fluid did you use and it needs to be tuned?
Great video..
5.29 pretty extreme for 33s, no?
It’s what east coast gear supply recommend for a 3rd Gen that’s heavy.
For 2nd gens 4.56 is a better fit for the rest of the gearing. That’s what I run on my 2nd Gen.
@@Adv4x4 ha.... i am getting ready to order the 4.56s.... for 33" tires (2nd Gen)
That will work just fine. Msoverland runs 4.56 on his 3rd Gen even with a alucab canopy camper.
great video, not really any big difference from a 2nd gen right?
No sir pretty much exactly the same. Besides a few little details such as the rear diff electrical connectors.
How’s much was it?
Is a retune required for new gears?
Currently on OTT.
I’m coming from a jeep and it was required on it.
I’m actually the OTT Tuner for VA! Yes we recommend a retune when you regear. Since you are already tuned, your update for the gears will not cost you any money.
Would I be able to drive without retune it?
Just trying to see if I have wait till my tuner comes to my area.
Yes your top speed will just be limited!
Did the owner end up tuning the ecu afterwards?
Yessir he went with OTT
Is this an sr5 auto or a TRD/ and or manual? Just asking for the gasket part number as I'm scrambling to find one so I can swap in the gears that just arrived
This one was a trd off-road!
Yeah, realized that once my gasket part # was different than the one in the video. Just one last thing, the snap ring and dust shields on the cvs, did you reuse? According to the fsm torque diagram it shows them as non reusable item. Just curious what you thought/ did
Yes I reused them!
How did it drive with the 5.29s and 33s?
Great! The rpm’s are a little high on the freeway but he’s going to go to a larger tire to even that out