How to install a tire onto a rim ( without a tire machine)
HTML-код
- Опубликовано: 2 окт 2024
- S3E28 How to install a tire on to a wheel.
How to install a tire on to a rim.
How to install a tire.
Tire installation.
Tire installation DIY.
Tire Installation without a tire machine.
Install a tire onto a rim DIY.
How to install a tire without a machine.
How to install a tire onto a rim ( without a tire machine)
![KAYTRANADA - Witchy (feat. Childish Gambino) [Official Video]](http://i.ytimg.com/vi/jGK3YVmGZ3Y/mqdefault.jpg)
wow, I have never thought that it's possible without machine. Amazing!
Can we get a close up of the lip so we can see how much damage was done during this process?
Nice Rim job bro!
Lol thx
Pause
Pause
Great VIDEO MY GEE, NICE AND SIMPLE!
WHEN I DO MINES IM GONA DUCT TAPE THE SCREW DRIVERS AS TO NOT DAMAGE RIM..
Thanks for showing the part where to place the tire in position to the rim to be able mount the tire
Just like changing a bicycle tire when I was a kid.
On todays episode of how to f**k up the lip of your wheel!
how so ?
@@wanalifyusofBy using those screwdrivers without applying the electrical tape at first. Stabbing a pointy metal tool against metal is a surefire way to gouge it, and long term damage it enough to create an unstable ride.
@@noseboop4354 if you watched the whole vid, you would see he has put tape on the screw drivers in the last steps where the force of rim and tires are teh most high.
@@mrbard1I think that's what he was implying that he only did it at the end instead of starting with them taped
If you have a hard time getting the bead to set, take a ratchet strap around the tread of the tire, not across the rim, literally only on the tread all the way around and tighten it up until the sidewalks blow out then add air
I'm just going to pay the $25 per rim 😂😂😂😂
It must be nice to be a rich white republican Trump supporter to be able to afford that luxury. You people don’t even pay your fair share
Tires are way too narrow for the rim
I'm surprised you ignored the red marking on tire.
I drive a lifted 4x4 diesel and I have never been able to get away with not balancing my tires. But on that note, good job though always nice to save a few dollars when you can.
All standard tire psi is between 30-35 psi you can drive on 40 but anything more than 35 WILL wear out the center of the tire faster and you'll have an uneven wear around 35psi your tires will wear evenly unless you drive a small car then 30 psi will be perfect! Do not ride on 45 psi with a small car otherwise you'll have a rough ride and pre mature worn tires but do what you want it's your own tires wearing lol just standard practice automotive certified info is all 🤷♂️😎🤙💯🔥
Your taking a big chance on damaging that rim.
His rim his cares not for your input
@@rockfordhx2768 thanks for your uneducated commet.
How? Cause rubber damages rims😂😂
I dont know why I'm answering this, but spend 65 years in the automotive repair business then you'll see how.
@@billsomerset238 how does a tire machine put any less leverage on the rim?
You should do it with the wheel face down. That way you only risk scratching the back of it!..
Unfortunately tires can only be mounted from the front.
what about balance and rotation.
This is what i was thinking but i wonder if it would be cheaper to get that done vs the cost of having a shop put new tires on all 4 rims
Two long ass pry bars would work better if you don't give a shit. Just start at one point and work it around on the last step and walk em
it HAD to be a VW guy fucking christ makes sense lmfao
Try doing tht with a 18" and up u want be able to do it
What are you talking about
I mount 22 and 24 inch semi tires all the time with 2 bars. Take me 2 seconds
Not every tire will work this way.
Thanks for the video, this is going to save me a ton of money!
Now try it on a real tire instead of that O-ring you call a tire.
Easier with bigger sidewall actually
I’m watching this because the tire shop said they don’t have a big enough machine but I remember watching people install them manually when I was a kid
Poor rim tho
Put the electrical tape on the screwdrivers before you start to save your rim.
Where is wheel balance
He reckons it´s over rated.. 😆
All right
$5-10/ wheel at any auto shop or get balancing beads you put inside of the tire... Not entirely sure how they work, but apparently they work really well if the correct amount is added. They're like little BB's you put inside of the tire when mounting.
@34979Charlie at about 8:20 he says balancing is "in his opinion a bit over rated" lol
it's easier to start with the inside because the rim is more rounded...
Harbor freight sells a tire balancer for $100. It actually works
Awesome! Now show me how to remove it 😂
I guess I will eventually
Tie down strap and 3ton Jack. Just watch the video
A cheap set of 16 inch tire irons would work way better than screw drivers
I can only find 24inch is that ok?
@@LadyVSC13 thats even better. More leverage 👍
@@GoBart454 sweet ty soooooo much for the info!!!
What about yhe valve stem tho
I have a separate valve stem video
Does the flat heads not scratch the rim tho?
They did.
FANTASTIC! Great video. Thank you
Nice job !
Thx
Лучше я отдам 10$ за шиномонтаж чем накоцаю диск. Так за эти 10$ еще и отбалансируют колеса.
Это у вас там 10 баксов. 😢 А тут 25 за колесо без балансировки. 150 и выше за 4 со всеми работами.
А, еще и записываться надо, и ждать два-три часа вместо получаса, потому что сезон, очереди, и только первого клиента начинают делать вовремя.
Imagine a thin wall tire
lol no
I’ll just paid that money and take it to the shop and have professionals do it
Only 1% of people in the world have money, that's why the videos doing so good.
Obviously if you can afford it and take it to the shop
This guy remind me ray from riding in cars with boys lol 😆 😂
So if I do these one at a time same tire same side do I want to balance them