CHANGING TIRES DISMOUNT & MOUNT USING TIRE IRONS /BARS/SPOONS W/EXPLANATION OF HOW TO DO IT ANY SIZE
HTML-код
- Опубликовано: 27 сен 2024
- AS WITH ALL MY VIDEOS I TRY TO GIVE THE MOST INFORMATION IN THE LEAST AMOUNT OF TIME AS POSSIBLE SO I DON'T WASTE YOUR TIME. IN THIS VIDEO I GO OVER HOW TO DISMOUNT AND MOUNT TIRES USING TIRE IRONS. YOU CAN USE TIRE IRONS TO DISMOUNT AND MOUNT ANY SIZE TIRE. I GO OVER EVERYTHING FROM BREAKING THE BEAD TO DISMOUNTING AND MOUNTING THE TIRES TO SEATING THE BEAD AND AIRING THEM UP. I ALSO GO OVER SOME OPTIONS OF WHAT TO DO IF THE TIRE IS BEING A PAIN IN THE ASS AND NOT COOPERATING EITHER COMING OFF OR GOING BACK ON.
This video is the difference between exasperated failure and sweet success. Thank you DIY Dan
Thankyou for taking the time to show how important the recessed area is, I'm 66 and thought I'd try fitting my own tyres which worked out OK "after" I watched you're video... 10/10...
Best video on this BY FAR.. I just had to do 6 x 17's and 6 x 19.5 dismount and mount.. Definitely not fun, but it's $520 to switch just one set here so worth my time for sure.
I'd have come to you and done it for $250
I absolutely agree! Like, bro! He has NO IDEA how HELPFUL this video has been!😅😅😅Yea? like boom!!! It suddenly clicked! (Not the tire) 😅 his class!! Hands down best coach/teacher/sensei by FAR!
The best video i have seen on this subject! Very clear explanations, thankyou sooo much!
Best and most descriptive video I've seen, very good work
As others have said. By far the best video on You Tube. Pay close attention to finding the recess of the wheel. By far the most overlooked detail. Thanks for the video.
Hi the best tyre fitting video I have ever watched.......your good man....thank you so much for sharing your knowledge man.
I am in the UK.....been changing my own car and 4x4 tyres since I was 17 with just tyre irons....now 71....just for myself.
My pal brought me 6 old wheels and asked me to help him dismount them.....they are off a big american 4x4 16inch.....20 years old....tyres look great no cracks.
Bead braking was a sinch.....getting the first side off every tyre was easy but getting the back side of every one was a PITA.
We gave up on the last 2 for another day.....but seeing your ways has given me new hope.
Just never had a prob before....thinking its just that the rubber is old....we used plenty of lube.
Nick from the UK.
Thnx best Tyre change training video on you tube 😊
7:36 was the point I needed. Everyone else’s tires seemed to be popping right off the wheel but mine wasn’t. Thanks!
I had the same issue.
I used a circular carbide tip power saw to cut the stinking tires off. About 2 inches off the rim. Then I used a normal size cutting torch for the rest of the rubber and wire still on the rim. I wasn't going to play any games people. I wanted the rims to create a outdoor movable airtight woodstove. It takes 4 rims. 2 axles. Inch and a half inch pipe. Slide it into 2 inch pipe. The 2 inch pipe is schedule 80. It rolls inside better. 4 feet wide and 8 feet long. A lot of plate steel. Your making a firebox. Oh well I guess you know there's no tires on my rims. A lot more to do. Ok see you all.
@@philkillen5016 You did it wrong and made a lot more work for yourself, but still you were proud enough to post it here. I struggled with my first rim. Then the rest were easy because I followed the procedure. If you own a car or motorcycle, learn to do it correctly ...or pay the big bucks at a tire shop.
This was great. Very informative. exactly the way a how to/tutorial video should be.
Got a like buddy, taught me a few tricks I didnt know. Thanks
KenTool has ALUMINUM and CLASSIC BRASS BEAD HOLDERS . The air fitting is a Milton recapper P/N 731 , use with an open flow clip on air chuck .
KenTool Akron , Ohio since 1920 Nice people to deal with !
American Made Products !
Thank you🙏💯 Great teacher.
Great video. I learned much about rims and tires. I'm sure your video will help me to change my motorcycle tires.
I super appreciate this video man. I sweat my aaay of before trying to swap just lt's and you make it look easy.
My favorite moment from the video so far is the rear stomp while pulling front bead. I'm at 7:02 and couldn't stop myself from praising you💯
More up come I'm sure
Thank you; very helpful. Did 8 tires but started on my first one backwards going away from the groove.
Best video on tire chaning.
This video deserves a lot more credit!
Thanks buddy appreciate it God bless
It’s crazy that you said that about the direction of mounting him that’s what happened I just cut a brand new trailer tire off with my salsa and bolt Cutters. I don’t know how the guy got it on nobody could get it off
haven’t seen anybody do Tires this way in a long time I needed the memory when I was younger and I work with my aunt out on the trucks and this is how they did it by hand the giant semi tires
in here I am struggling with his dang trailer tire so is everybody else but I’m gonna get it
They call it a safety rim. If the tire goes flat while driving, it is supposed to prevent the tire for removing itself from the wheel
A Master Class - Thank you, sir.
brilliant video, very informative!
Excellent thank you bud 👍
Great tutorial!
Looks more doable than the other vids I’ve seen. I’ll try it tomorrow
I had a bad accident that left my arm kinda screwed missing a big chunk like a shark bite plus bearly any mobility in my wrist i can put my weight on it no prob but cant really bend it goin back to work tomorrow and im a bit nervous i used to be so good and efficient at this job plus i love it i really hope i can still do it
Fabulous 👌
thank you so much
Good advice, thanks…
Nice, very nice!
Best tyre explanation. We're can i buy the quick inflator i can't seem to find one. Thanks
Look through the comments I remember in the past I told somebody how to get it or they found it Ken tool, I believe
if i rounded the edges on some long handled pry bars, would it be enough to prevent damage?
In a pinch i have used prybars before but it does make it more difficult good luck
@@diydan7019 just trying to be cheap lmao 215 55 16 passenger snow tires need to come off and rather just do it myself. Watched this same process 20yrs ago and didn't remember it after so long.
Thank you for this video.
ratchet strap and a floor jack will pop the bead so just was going to grind em down to a spoon profile..
Well done amigo 👍
i'd be the only mofo that would make that recess of the groove on the hard side just to keep it that way...
That groove be the key to the whole kit and kaboodle! Ida done it backwards had I not found this vid
2:49 working on skid steer tires right now and I have a rim that does not have a recessed lip so this is not entirely true...
First time ever seeing or hearing that what size tire and what brand of skid steer
@@diydan7019 bobcat 8 lug 12x16.5
Please I need to know where I can get the tire irons what size to change my car tire size 19 inch
Ummm, You might go on the internet and type in, "Tire Irons." Just a thought.
Harbor Freight 24" tire irons are all you need. They only $6.
Algorithm boost.
pls advise the type of lube you are using? The one im using is more stickyier but yours is more water based?
You just add water to it to dilute it down throw a couple clumps of it in a bucket mix it with water and squeeze it between your fingers to dilute it
@@diydan7019 Oooh i didn't think of that thank you and thanks for the vid!
If I can do that several times a day, i won't ever need to work out in the gym.
This is a video from professional. In addition to tools you need to develop that skill. After that you can be successful in it.
12:58 What is this adapter called? Ive googled a few things like "fast tire inflator adapter" but haven't found it.
MILTON 731 RE-CAPPERS F. PLUG M-STYLE there is also a 732 depending on what style quick couplers you use on your air hoses
@@diydan7019 Thanks, I just ordered one!
Agreed love listening to a pro talk about what thay do
Thank you for your awesome video it did help in a big way. I was struggling😮👍🇺🇸🥳
Excellent! Thank you Sir
subbed. absolutely solid info.
can you do a second video on getting the second lip of the tire off? i'm spending 90% of my time here. i have not once gotten the tire to pop off using the method where you drop tire and let gravity do work while pull up on tire iron right before tire/wheel hits ground. when i flip tire over and try to pop wheel out the top, the wheel doesn't sit up like it does in your video. any help here appreciated.
You are a 100% sure you are dismounting from the correct side. what size is the tire?
Excellent! Preciate the time & effort u put into sharing this with us.
Is the Fast inflator a real thing and where can I pick one up. Mentioned at around 13:00 mark of the video.
Milton 731 any tire supplier should have it
Incredible video.
👌🏿
I just got the ken Tool duckbilled tire wedge hammer. These are a ton of methods for breaking the bead. I decided on the most simple, effective and least cost. I have to admit that I don't feel comfortable swinging this against a tire. I will most likely place it on the tire and hit it with a dead blow hammer. I'm also afraid to use the duckbilled hammer on a motorcycle tire because I worry it could send the rim out of true. For the motorcycle tires I will prob'ly stick with a board and a couple of C-clamps.
If you own vehicles that use tires, its a really good idea to know how to service tires. I watched many videos on mounting tires. This is the best video by far.
Best video yet, thank you
Thank you