So you cut a hole in the bottom first. Then you had a nice long extension bar on the drill for the cutter and drilled at an angle. Why not put extension bar through the bottom hole then put cutter on the bar.
Welcome back 🙂 Would be nice if they upgrade to lever based Wago clamps for all the connections 😉 Is the Ethernet back? If not, that would be also pretty neat 🙂
@@jeffcartwright7270 exactly what I thought the first second. I was like these terminals wont last the test of time. in florescent fixtures these crumble all the time. let alone exposed to outdoor conditions.
@@SuperJWATT you not heard of IP65 enclosures, ive had mine for over a year and decided to spray my front panel cover to match my car and the terminals are exactly the same as the day they was fitted hense they are with in a IP65 enclosure.
Not so sure my Indra Smart Pro has Phoenix Pla 5 clamp type connectors the live failed after 3 years (2 weeks out of warrantee!!) Luckily caught it before it burnt the control board, 32A bit close to the limit for that connector
@@paulevans5018 exactly, I have 70+ years of electrical experience passed down to me. These connectors fail quite frequently. I would like to see real lugs so the cable isn't derated as well. Those connectors are not even 65 degree c probably. So the conductor would be rated at the lowest value possible.
As your wall was a test point, why didn't you just fit a nicely stained/treated bit of plywood on stand-offs on your wall with just 4 holes in the wall. Then all the main damaging holes would all have been in a bit of plywood.
We spotted them all out and about together having lunch, but we passed their stand a few times as well with no-one there. Hope there's at least one member there all the time this year...
Yeah me, Elijah and Max will be on the stand all weekend this time and on Friday lots of the team will be there. Lee and Luke will be there on Saturday as well.
No doubt they are relying on the end user not really seeing the insides, all about how it looks installed. In a static install, nothing wrong with the installation from a reliability and usability point of view. Just looks cheap.
Beautiful charger and install jordon.👌just a concern after a couple more years of new chargers being installed you will need the porch corner rebuilding.The cheese hole wall 😂😄👍👍
What do you do with all the old chargers you take off Jordan? I could be in the market for a reasonably priced, 1 previous Jordan type owner. you could even come down to the south coast and fit it for me.😀
So glad they are back - stunning bits of kit. Do you know what the big differences are with the A2 and A3 - Andersen seem to sell both in parallel, the A3 is smaller and the latest one, but cheaper. The A2 is more expensive, the older design. Both look great and I actually prefer the look of the A2, but can’t work out why there is a price difference and more importantly why the older unit is more than the newer smaller unit. Any help on the differences would be amazing
You ought to put some junction box on that wall and perhaps some sort of plate to mount to save that poor wall. Love the London Brick seems a shame to perforate it.
No sure if I trust you guys for this sort of stuff anymore. Got a Hypervolt off the back of your review. Had nothing but trouble with my 3.0 and support is pretty poor😢
I have a question as an industrial electrician in the US. Here in the states we use 240v single phase for residential power, because the phase is split anything that uses 240v uses two hot legs L1&L2. For the circuits that are 120v it’s L1 and the neutral which center tapped in the middle of the 240v transformer winding. In the video the charger says it’s 240v, when hooking it up he says I have my line neutral and cpc which I’m assuming is ground. So are your utility supplies 3 phase and they just run a L1 and a neutral to get the 240v? If so what is the phase to phase voltage?
To prevent all the holes in your wall you can use a wooden plate of plywood if i say it correctly. Only four holes to mount it on your wall a bit of paint and you can mount the next charger on the plywood.... and Bob's your uncle although I haven't got a clue who Bob is. But the English people always say that so... ( we say klaar is Kees) question from which coountry am I?
The Porsche of chargers uses Dacia connector blocks. As with the silly 20mm hole you had to bodge to 25mm, it's a shame they didn't use the downtime to redesign some features that let the charger down. Presumably this is old pre-bankrupcy stock they are trying to clear.
Saw your comment and went back to look at the video. It's not a UniFi doorbell but a Ring one the bigger Ring spotlight also backs this up. As for the UniFi Doorbell, I found it fairly easy to wire where I live. The EU one provides a transformer block which you put in your consumer unit. But since I didn't want to mess around with that mine is powered off POE with an inline wireless chime module for Honeywell Chimes. Have a search on RUclips for G4 Doorbell POE powered with Chime, a UK based RUclipsr did do a tutorial on how to do it.
Not asn electrician but seems a lot of fafing about to get the connections in. I would have thought all holes would have been predrilled but as I said I am not an electrian. Looks nice though
Welcome back!!! YAY!!! Ahh I noticed you had changed the Charger box differently. What you have tested and compared different models of Chargers. Compare which is best. That would be interesting. I installed a Tesla (silver) that comes with 240v. It was successful and so easy. Thumbs up! Cheers!
In Artisan Electrics...a builder quotes to Jordan how much it will cost to replace the section of wall that has been riddled with plasplugs and countless number of wall chargers that had been hanging on. Will Jordan pay it or offer the builder his electric van as an alternative means of payment? Watch this space....or hole.
I know you guys down there like to pretend the country stops at Coventry, but you should probably make it clear you're at Fully Charged South as they're running two this year
Look at the new OVO charge anytime EV tariff add-on, highly recommend, you need certain smart charger, but it allows you to charge your car anytime for 0.10pkwh
@@kobirelf97 really not, on standard rate it’s the same across the board Elec 30.85pkwh 47p standing charge Gas 9.69p kWh 27.72 standing charge Plus EV addon .10p kWh to charge your car
@@kobirelf97 don’t fix into a contract while prices are high, Go to the variable standard price cap rate. No point comparing old prices with todays prices… your new fix will be more expensive. What are your price units per kWh?
No wall plugs and screws in the van? What the hell is in there? None at home either..... are you even a real tradesman Jordan.... 🤣🤣 Only joking, but it is a bit daft!! Nice charger it is. Question is, how long before your wall looses structural integrity.... 😂 Bet you wished you'd mounted a nice piece of wood to that wall which would've made your life so much easier from the start.
Request a quote from Artisan Electrics here - app.openquote.net/company/artisanelectrics
Thought he was going to say Cory is back 😂
That’s what they wanted you to think.
I also thought this 🤣
We wish! Better channel back then
@@CBValeting he has his own channel. I like his and this one.
@@2Sorts I know. Really cool guy and a great teacher.
Jordan, Why don't you fit a nice piece of stained varnished wood to save any more damage to your wall?
So you cut a hole in the bottom first. Then you had a nice long extension bar on the drill for the cutter and drilled at an angle. Why not put extension bar through the bottom hole then put cutter on the bar.
I thank you, that's what I was yelling!
That wall has 2 charger swaps left , it’s held together with red plugs 😂
It’s not good is it 🥲
Be sure to check out the new Andersen EV website - www.andersen-ev.com/?artisan=true
0:28 French >Wallnut
Welcome back 🙂
Would be nice if they upgrade to lever based Wago clamps for all the connections 😉
Is the Ethernet back? If not, that would be also pretty neat 🙂
"Choc Block's" on a charger of that price, not acceptable TBH - Poor !.
@@jeffcartwright7270 exactly what I thought the first second. I was like these terminals wont last the test of time. in florescent fixtures these crumble all the time. let alone exposed to outdoor conditions.
@@SuperJWATT you not heard of IP65 enclosures, ive had mine for over a year and decided to spray my front panel cover to match my car and the terminals are exactly the same as the day they was fitted hense they are with in a IP65 enclosure.
Not so sure my Indra Smart Pro has Phoenix Pla 5 clamp type connectors the live failed after 3 years (2 weeks out of warrantee!!) Luckily caught it before it burnt the control board, 32A bit close to the limit for that connector
@@paulevans5018 exactly, I have 70+ years of electrical experience passed down to me. These connectors fail quite frequently. I would like to see real lugs so the cable isn't derated as well. Those connectors are not even 65 degree c probably. So the conductor would be rated at the lowest value possible.
Can't believe there was ever any question! This is the most beautiful charger ever.
As your wall was a test point, why didn't you just fit a nicely stained/treated bit of plywood on stand-offs on your wall with just 4 holes in the wall. Then all the main damaging holes would all have been in a bit of plywood.
I'm sure all your customers who you've installed a "cheap plastic box" outside there house are delighted with this video 😂
Does the Anderson provide a long enough cable to hardwire into the VW van ? To extend the range for the long journeys down to local shops 👍
You had a stand at fully charged last year but there was no one there and we popped back several times to see you 🤷♀️
We spotted them all out and about together having lunch, but we passed their stand a few times as well with no-one there. Hope there's at least one member there all the time this year...
Yeah me, Elijah and Max will be on the stand all weekend this time and on Friday lots of the team will be there. Lee and Luke will be there on Saturday as well.
Drill one corner hole screw it in .Then place the level on top ,turn the case up and down to mark ,drill and screw in the last three holes
Sorry but those connector blocks look so cheap and nasty in such an expensive piece of equipment
I said the very same when Jordan was fitting his first Anderson charger.
It's reliable so why complicate
Agreed.
No doubt they are relying on the end user not really seeing the insides, all about how it looks installed.
In a static install, nothing wrong with the installation from a reliability and usability point of view. Just looks cheap.
Chocky blocks 😂
Why don't they make one with an inertia reel and inertia lock for the cable?
Have like a gyro thing with slip rings for the rotating connection?
Beautiful charger and install jordon.👌just a concern after a couple more years of new chargers being installed you will need the porch corner rebuilding.The cheese hole wall 😂😄👍👍
Whats the structural integrity of raw plugs? That wall looked about 80% raw plug
Turn's out it was the last charger you installed on this wall!! All the best on your traveling adventures Jordan & Lisa :)
No wall plugs or screws at home? Unbelievable Jeff!
Bet the van is on 50% after moving it for the charger install 😂 Nice charger!
Probably😂
That is a fabulous looking charger nice install 🇮🇪👏😎
Good to see Anderson is back
i would of thought your van would all have a place for all your hilti equipment beautifully on display
I'd love to make that garden look so much better. Looks so sad!
What do you do with all the old chargers you take off Jordan? I could be in the market for a reasonably priced, 1 previous Jordan type owner. you could even come down to the south coast and fit it for me.😀
brushed cable wrap... very good idea
So glad they are back - stunning bits of kit. Do you know what the big differences are with the A2 and A3 - Andersen seem to sell both in parallel, the A3 is smaller and the latest one, but cheaper. The A2 is more expensive, the older design. Both look great and I actually prefer the look of the A2, but can’t work out why there is a price difference and more importantly why the older unit is more than the newer smaller unit. Any help on the differences would be amazing
16:34 who is that new boldie staff? 🤔
Hanging out on your side of the pond. Came to London on Tuesday
the Allen key set is so colorful , haha
Why didn’t you fill all the holes in before fitting the charger 🤔
You ought to put some junction box on that wall and perhaps some sort of plate to mount to save that poor wall. Love the London Brick seems a shame to perforate it.
Looks like a sophisticated charger, but look like a lot of work with all the sides panels etc. to install compared with others.
Probably is sophisticated however just having somewhere for your cable to go is worth the extra 20 minutes of labour charged by the sparky imo.
We have one of these and it’s always lit up inside? Is it supposed to do that? You can see it glowing from within at night
Nice looking. But with all the charger and cable thefts, I’d be putting up a stainless lockable enclosure with a simple charger inside.
Just taken delivery of my Andersen charger
How much does the charger cost and how much did you pay for it, assuming that you bought it, that is
No sure if I trust you guys for this sort of stuff anymore. Got a Hypervolt off the back of your review. Had nothing but trouble with my 3.0 and support is pretty poor😢
It’s got awful flashy leds and the best RUclipsr kickbacks tho.
If you want an actual luxurious drill to go with the luxurious charging point you need to get a Festool!
Should have gone for Mr Anderson, or Neo. Always gotta go for the pun 😂
Looks lovely on the side of the porch where no one can see it.
I always thought they had a fancy retractable cable
Excellent videos as always
I have a question as an industrial electrician in the US.
Here in the states we use 240v single phase for residential power, because the phase is split anything that uses 240v uses two hot legs L1&L2. For the circuits that are 120v it’s L1 and the neutral which center tapped in the middle of the 240v transformer winding.
In the video the charger says it’s 240v, when hooking it up he says I have my line neutral and cpc which I’m assuming is ground.
So are your utility supplies 3 phase and they just run a L1 and a neutral to get the 240v? If so what is the phase to phase voltage?
Yes most homes get l1 + neutral giving 240 v . Some big properties get 3 phase and neutral giving 400 v between phases.
To prevent all the holes in your wall you can use a wooden plate of plywood if i say it correctly. Only four holes to mount it on your wall a bit of paint and you can mount the next charger on the plywood.... and Bob's your uncle although I haven't got a clue who Bob is. But the English people always say that so... ( we say klaar is Kees) question from which coountry am I?
Wish u were at Fully Charged Live in Sydney 😢
The Porsche of chargers uses Dacia connector blocks. As with the silly 20mm hole you had to bodge to 25mm, it's a shame they didn't use the downtime to redesign some features that let the charger down. Presumably this is old pre-bankrupcy stock they are trying to clear.
yeah, based on this video I don't think I will be buying one of these...looks poor.
Did i hear him Say if your doing rear entry?
Why is your wall Swiss cheese? French cleats work pretty well.
Doing rear entry? Fnaar!
If you don't have spare bricks, I would source some to put back for when you move out lol.
👋 cool design
Glad you like it
On the outside. Inside the connector block's make it look cheap and terrible
I have a hive ev charger but dream of a Anderson
Hi Artisan Electrics, are you going to be at both Fully Charged Live UK shows ? (North & South) or just South ?
Hi! No just the south one
Put some wood on the brick and attach the charger to the wood?
@7:50 more rear entry, this time getting drilled. 😂
Does your charger dress to the left or the right sir?
Noticed the Unifi doorbell, how do you find it and how easy is it to wire in etc?
Saw your comment and went back to look at the video.
It's not a UniFi doorbell but a Ring one the bigger Ring spotlight also backs this up.
As for the UniFi Doorbell, I found it fairly easy to wire where I live. The EU one provides a transformer block which you put in your consumer unit. But since I didn't want to mess around with that mine is powered off POE with an inline wireless chime module for Honeywell Chimes.
Have a search on RUclips for G4 Doorbell POE powered with Chime, a UK based RUclipsr did do a tutorial on how to do it.
Love video
"no cables" yeah because you mounted an entire bookcase to your wall ....
Just imagine getting something wrong and have to take it all off again 😅
6:01 Are you coming to FCL Harrogate?
Not asn electrician but seems a lot of fafing about to get the connections in. I would have thought all holes would have been predrilled but as I said I am not an electrian. Looks nice though
Love the look of the Andersen, but not read anything good about their app which is a huge part of the charging experience! A real shame.
Now you have so many spare chargers, can I have one of them?
I like the channel but how can anyone trust a person who changes their recommendations depending on the highest bidder each week!
Welcome back!!! YAY!!! Ahh I noticed you had changed the Charger box differently. What you have tested and compared different models of Chargers. Compare which is best. That would be interesting. I installed a Tesla (silver) that comes with 240v. It was successful and so easy. Thumbs up! Cheers!
Looks good but sure needs Wago connectors
Looks like a chopping board stuck on the side of the house
Means you can chop the carrots and charge the car at the same time. What’s not to like?
In Artisan Electrics...a builder quotes to Jordan how much it will cost to replace the section of wall that has been riddled with plasplugs and countless number of wall chargers that had been hanging on. Will Jordan pay it or offer the builder his electric van as an alternative means of payment? Watch this space....or hole.
Hi buddy, what area do you cover?
Cambridgeshire
@@artisanelectrics to far from Bristol
Electrons are Electrons, who cares what it looks like. Just make the app good so that nobody can steal my power.
I know you guys down there like to pretend the country stops at Coventry, but you should probably make it clear you're at Fully Charged South as they're running two this year
Try smappee ev wall / ev base
Why not fix a bit of wood?
Sorry, nice looking, but lacks good quality cage clamp connectors and proper bottom entry IP rated cable entry.
I hate the cheap use of the over the counter connector block! Come on in this day and age!
Cable connection was a bit of an arse.... They could improve on it.
Such a nice charger and you still have to screw in the cables.🤨
Reuben it should be
Eminem-without you😂
I cant be the only one who thought Corey
Not another one 🤣
Speaking of Fully Charged Live... Would be great if you could cover V2H...
Look at the new OVO charge anytime EV tariff add-on, highly recommend, you need certain smart charger, but it allows you to charge your car anytime for 0.10pkwh
OVO are so overpriced for energy
@@kobirelf97 really not, on standard rate it’s the same across the board
Elec 30.85pkwh
47p standing charge
Gas 9.69p kWh
27.72 standing charge
Plus EV addon
.10p kWh to charge your car
@@jackwhotton6145 for a economy 7 tariff for my tiny studio flat it's £150 a mouth compered to British gas that's £50 a mouth so definitely overpriced
@@kobirelf97 don’t fix into a contract while prices are high,
Go to the variable standard price cap rate.
No point comparing old prices with todays prices… your new fix will be more expensive.
What are your price units per kWh?
Always angle drilling
Yes they’re certainly back and so is their shocking customer service ☠️
Slim Shady?
Clicks on -> Not Cory........ -> Clicks off. 😅
i bet that costs a lot of moneyyyyyyy
Why would you buy one using same basic verification system, just for these to go bump later down the line. Be smart, buy a zappi!
brand of tape measure and trousers
Unilite and Blaklader links in the description 👍
Charger porn....The power of consumerism is endless....it's just a battery charger!
No wall plugs and screws in the van? What the hell is in there? None at home either..... are you even a real tradesman Jordan.... 🤣🤣 Only joking, but it is a bit daft!!
Nice charger it is. Question is, how long before your wall looses structural integrity.... 😂 Bet you wished you'd mounted a nice piece of wood to that wall which would've made your life so much easier from the start.
If that fella has been advising the government on EV infrastructure he needs replacing
I thought it was going to be Oscar!
What happened to him?
Aliens
I guess an Anderson video comes with Linus Tech Tips levels of Clickbait.
Gutted it’s not Cory 😂
I honestly thought it was going to be Cory...
I'm not saying I'm upset, I'm just a little disappointed.