Got a skyvac mighty atom a few weeks ago and there is Def a learning curf to using it but it's actually made it possible for me to do those higher 3 story gutter clears which I would usually pass on. I usually position the camera so it's at the side so you can see what you're clearing up next as usually the tiles are in the way if it's at the top. Great bit of kit though.
Hello, thank you for updating us on your experience using the skyVac Atom - it is a brilliant little machine. It will take some practise getting used to using something like this, particularly if you're familiar with emptying gutters by hand - but it sure helps alleviate the safety risks that comes with ladders and scaffolding! If you'd like any advice using the skyVac Atom no matter how small, please just give our team here a call during office opening hours we'll be more than happy to talk you through best practise 🙂 Kindest regards, Danielle
I have just bought a skyvac atom ,how and how often are you supposed to clean the pipes and filter inside of machine? Also where do you tip the rubbish after job is done?
Hi there Ben, Apologies in the delay in getting back to you. If you contact our team on 01604 968700 or email: info@spinaclean.com, our team should be able to advise you on what's best for your machine right away! Thank-you, Spinaclean
Hi there, that's so great to hear it is an awesome little vac 🤩 we have these jackets available, please see link to our website www.spinaclean.com/skyvac-hi-vis-safety-jacket Kindest regards, the Spinaclean team
Hi, I just recently purchased one of these and mine has come with the 2 pin Australian plug, is this the usual or have I purchased a import? I have noticed your power supply is a orange cable. Have your changed yours? Could I just change the plug to a uk 3 port? Thanks
Hi Morgan, thank you for your message apologies for the delay in getting back to you we have recently just opened following the Christmas break. Was this supplied directly from us? Could you please email me a photo to danielle@spinaclean.com and I will look into this for you right away 🙂 Kindest regards, the Spinaclean team
Is there an easier way to keep it from clogging with leaves? I recently got one this week and it kept getting clogged on bigger leaves and pine needles. I was constantly stopping and unclogging the blue/crevice attachment.
Hello thank you for your comment. The solution to the problem that we have had in the past is to not put the end tool (i.e the dirt breaker) directly straight down in to the gutter but to position it on it's side a little so it's at an angle. By doing this technique and using a sweeping sort of motion, allows a flow of air to get to the tool to help prevent it clogging with leaves etc. We hope this answers your question, however if you are still having troubles or require any more information, be sure to contact us on 01604 968700 and someone will be able to assist you further. Kind regards, the Spinaclean team.
Thank you for your inquiry . The filter is a cloth filter so hot ash would be a no go. Once the ash is cold it should be fine , hope this answers your question. Many thanks
keeps getting clogged the hose is only 38mm the new gutter vac systems hose is 51mm it makes a big difference this machine is a cheap plastic pice of crap trust me i bought one 🤤 what a pile of crap
Hi there, we are really sorry you feel this way about our skyVac Atom product. If you could provide us with some contact details I shall get someone from the Spinaclean team to give you a call to discuss further. We want our customers to be satisfied with their purchases and the service they receive, and ensuring our customers are happy is at the heart of everything we do. We hope to hear from you soon, please email me on danielle@spinaclean.com with your contact details and we will be in touch.
Thanks ! A really clear, simple and concise presentation.
Got a skyvac mighty atom a few weeks ago and there is Def a learning curf to using it but it's actually made it possible for me to do those higher 3 story gutter clears which I would usually pass on.
I usually position the camera so it's at the side so you can see what you're clearing up next as usually the tiles are in the way if it's at the top.
Great bit of kit though.
Hello, thank you for updating us on your experience using the skyVac Atom - it is a brilliant little machine. It will take some practise getting used to using something like this, particularly if you're familiar with emptying gutters by hand - but it sure helps alleviate the safety risks that comes with ladders and scaffolding!
If you'd like any advice using the skyVac Atom no matter how small, please just give our team here a call during office opening hours we'll be more than happy to talk you through best practise 🙂
Kindest regards,
Danielle
works a treat had mine for a while now love it great for domestic gutters thanks guys
You're welcome Daniel, pleased you have found it effective! If we can be of any other assistance, please let us know!
I have just bought a skyvac atom ,how and how often are you supposed to clean the pipes and filter inside of machine? Also where do you tip the rubbish after job is done?
Hi there Ben,
Apologies in the delay in getting back to you. If you contact our team on 01604 968700 or email: info@spinaclean.com, our team should be able to advise you on what's best for your machine right away!
Thank-you,
Spinaclean
Just purchased one of these , would love one of the waterproof coats the presenter is wearing do you sell them ?
Hi there, that's so great to hear it is an awesome little vac 🤩 we have these jackets available, please see link to our website www.spinaclean.com/skyvac-hi-vis-safety-jacket
Kindest regards, the Spinaclean team
Hi,
I just recently purchased one of these and mine has come with the 2 pin Australian plug, is this the usual or have I purchased a import? I have noticed your power supply is a orange cable. Have your changed yours?
Could I just change the plug to a uk 3 port?
Thanks
Hi Morgan, thank you for your message apologies for the delay in getting back to you we have recently just opened following the Christmas break. Was this supplied directly from us? Could you please email me a photo to danielle@spinaclean.com and I will look into this for you right away 🙂
Kindest regards, the Spinaclean team
Is there an easier way to keep it from clogging with leaves? I recently got one this week and it kept getting clogged on bigger leaves and pine needles. I was constantly stopping and unclogging the blue/crevice attachment.
Hello thank you for your comment. The solution to the problem that we have had in the past is to not put the end tool (i.e the dirt breaker) directly straight down in to the gutter but to position it on it's side a little so it's at an angle. By doing this technique and using a sweeping sort of motion, allows a flow of air to get to the tool to help prevent it clogging with leaves etc.
We hope this answers your question, however if you are still having troubles or require any more information, be sure to contact us on 01604 968700 and someone will be able to assist you further.
Kind regards, the Spinaclean team.
How do you get them apart when stuck - this happens quite often and it's a major headache for me
i use silicone grease I get from the fishing tackle shop
Hi is there a certain way to use the pole/attachments as I am finding that quite a lot of the time it’s not lifting anything?
Hello Marc, please can you email info@spinaclean.com and our team will be able to help you :-)
Is the filter good enough for sucking up ash ? Will I spread the ash around someone's home
Thank you for your inquiry .
The filter is a cloth filter so hot ash would be a no go. Once the ash is cold it should be fine , hope this answers your question. Many thanks
keeps getting clogged
the hose is only 38mm
the new gutter vac systems hose is 51mm
it makes a big difference this machine is a cheap plastic pice of crap trust me i bought one 🤤
what a pile of crap
Hi there, we are really sorry you feel this way about our skyVac Atom product. If you could provide us with some contact details I shall get someone from the Spinaclean team to give you a call to discuss further.
We want our customers to be satisfied with their purchases and the service they receive, and ensuring our customers are happy is at the heart of everything we do. We hope to hear from you soon, please email me on danielle@spinaclean.com with your contact details and we will be in touch.