Wetting the floor the way to go Chris myself i just lay don plastic but of course you are doing more work then me and great work that is cheers so much makes my day when a see a new clip up Phil from Australia.
I'm using the Devilbiss DV1 S with a 1.0mm for base and then the 1.2mm for the clear and wow it puts out great results. I love your show, keep up the great work.
I use lvlp 1.4 tip the black lvlp you showed us I like that spray gun I use the 1.7 it comes with for primer I have multiples of that spray gun! My favorite .
Review a sata 5500 i just see alot of the channels always do the budget guns but hardly see any one do a 5500. I know they arent a budget gun but they are a investment and as with alot of sata's they will likely hold up for a very long time....and as always great content!!!!!
I have this gun as well as a PHS-155 1.8mm. I have all three Devilbiss dv1 guns and dont even use the dv1-c anymore since getting the prd-715. It sprays that good
I like the idea that the caps and nozzles can be changed to adapt to whatever you're doing. I like that. It's going to save you a whole heap of money in the long run. You can do everything with the one gun... and to have the split nozzle technology as well.. FANTASTIC..!!
Thanks Chris for another good video with good information. I ordered one of these guns and paid for it over 3 weeks ago but haven’t received it yet . My tracking shows shipped from CHINA but no details on where it is so hopefully it shows up I enjoy all your videos so keep them coming !!
I'm using a 1.3mm tip on the Fuji 4 gun and it is a challenge! The Porfis PRD-715 seems great, I'm curious how it compares to the D1 Drizzle as a budget gun. Thanks for this one!
I and totally amazed at how much I like this gun. It's currently one of my favs, Porphis is sending out some more guns for review so stay tuned. Appreciate your comment and support!
You want it to lay down smooth and not dry but not too wet. Too much material/not enough air is gonna lay down wet and orange peely. Not enough material/too much air and it's not gonna cover fast enough and it's gonna sand pile. Sand piling is gonna be rough and the paint/clear is not gonna stick and cause paint peeling. If it's too wet it's gonna run and cause uneven distribution/mottle with metallic paint. Air temperatures, material viscosity, and spray guns settings all come into play and you have to be able to adjust and compensate.
Nice work❤ ...Do i need to prime in the same day that i sand the car or its normal to sanding and preparing the surface than prime it after few days ??
Hi Chris, I'm pleased you like the PRD-715 as I had this gun on loan and the PRD-625 and both were great guns, as you said it lays the base really nice and silky and you got a nice flat finish from the clearcoat, I currently have the Porphis WP99 1.4 on loan which is a split tip and a side cup setup, while it sprays really well I'm a bit on the fence with the side cup setup. If you want a really good gun to test the try the Meiji Finer Core 1.3CR which I also have on loan ATM and this is one of the best guns I have tried in a long time, I have the WS400 series2 and the X5500 RP 1.3CC but this gun is as good at half the price👌👍John UK
This gun has been popping up all over RUclips. Everyone has been giving it very positive reviews and it also helps that the gun looks really sharp. Do you know how it would hold up with a smaller compressor? I have a 30 gallon so I have stuck to the LVLPs but I’ve seen it on a few channels and I really want one lol
I have question please i hope you answer is it good to use the blender and clear coat in the same sparygun like if u want to blend once u finished clear you put the blender in the clear coat coat and spary the area u want to blend clear im i wrong or no ?
Yes it can be done like that. Or you can spray straight blending thinner over the dry edge to melt it in. It's personal preference and results differ between brands of blender. They have aerosol blender too.
What would you recommend to learn on and stick with for car restorations, between these guns for base and clear? Looking to spend under $300. Porphis 717 Master Elite 88 Black Widow Drizzle I have a 80 gallon 2 stage compressor. Thank you in Advance!
@@GarageNoise Chris HI I HAVE HAD THAT FORD FOCUS MK3 FRONT BUMPER PAINTED TWICE STILL NOT A EXACT MATCH HE EVEN USED A SPECTRO CAMERA CHRIS ON THE FRONT WINGS OR FENDERS SOMEBODY SAID ANDY BLEND ON THE WINGS OR FENDERS 800 GRIT AND GRAY SCOFF PAD AND CLEAR BASE BLENDER THE WHOLE WING THEN BASE COAT PAINT AND CLEAR COAT PAINT IS THAT RIGHT CHRIS ✅️
Hi Chris, That bumper sure came out nice with the Porphis 715. UPK tried out the 135 model with so so results. Have you had a chance to work with this 715 since the review came out? Porphis also has the 717 with the split tip. Very fine atomization with it demonstrated on another channel. A little more money too. But the body of the 715 and the 717 are the same so tips are interchangeable. Would be interesting to get your professional opinion on it too. Thanks!
Yeah, I'm really surprised with how much I like that 715. It is a really nice gun. Puts down a beautiful finish, I have sprayed with it again since then and more great results, so I really do like that gun. I did just spray with the 629 I think and I've got a video coming out soon on that gun. They did send me the 135. That's their cheaper model, so that'll be interesting to see how it performs.
Hey there garage noise my name is Larry I live in Ohio and I have a dynasty lvmp spray gun just got done spraying my motorcycle cowling with some lacquer paint and clear I think I found that gun on Amazon you might want to try that it has a CFM of 10 it's a nice gun might want to try that
Great video, Chris. TCP Global has their Master Pro 44 spray gun. It comes in under the price of the Porphis 715, at around $150USD, and gives similar results off the gun. I've only see Paint Society and Mario Paint Class give reviews on it, and thought it would be awesome getting your feedback as well.
I have looked at that gun and thought about doing a review. I have some more Porphis guns coming a entry level gun and a split tip and another one. So maybe after that.
Technical Question, Do you have any suggestions how to minimize dieback using Finish One Overall Clear. I always end up cutting and buffing after a couple days when I use it. Love your videos
I'm getting the 717, the split tip version. Currently using a Walcom Slim Kombat with a 1.3 for base and clear. And an AeroPro A-610 with a 1.7 for HB primer. I'm watching from Australia as well.
Hey man, I’ve got a question that I can’t get a straight answer for. I’m spraying an Eastwood dtm epoxy primer and it says you can recoat within 4 or 5 days. I sprayed it and was going to go over with a 2k after an hour and a half but it’s still a little tacky so decided I’ll wait 24 hours. My question is do I need to clean the epoxy primed panels when I prime tomorrow or just tack rag it?? Thanks for reading this novel lol.
@@GarageNoise ok. Should I not be concerned with anything settling on it overnight? Planning on doing it tomorrow. I’m new to this and understand wax and grease remover is a no no on primer is that right? Thanks a lot for the reply
@@manuelmejia76 well, I will do that I still need to figure that out myself. However they are sending me Three more guns. I totally surprised at how well I like this gun I reached out to them and they are graciously sending out some more.
so what makes a Sata, DeVilbiss or Iwata worth 700-1100 dollars compared to this 220 dollar gun? Do the high end guns really spray that much better or are companies getting more greedy?
Some would say build quality but I feelblike the build quality on this gun is great. The quality of these budget gun has really improved over the last few years. I don't really see the difference in dollars to be honest. If you can paint you can paint no matter what gun you use. I feel like it's a plus to learn on a budget gun it make you a better painter. Some of the cheaper guns are more difficult to get dialed in to achieve the finish that your looking for. So some of the high end guns can be easier to use, but not all. I found this gun to be very easy to use and I have no affiliation with this company.
For those of you who are interested in purchase of this gun. Add the promo code garagenose247 and you'll get 5% off.
Wow Incredible result! Cant see any orange peel on that finish and probably no need for buffing or wet sanding. You are a pro man!
Normally some orange peel will appear after clear dries
Thank you very much!
I just got the 717 and man this gun performs like one of my expensive guns
That one has the split tip?
Yes it does. My painter who has been helping me compares the body to a SATA and sprays like his Iwata.
Wetting the floor the way to go Chris myself i just lay don plastic but of course you are doing more work then me and great work that is cheers so much makes my day when a see a new clip up Phil from Australia.
Australia, that's cool! Appreciate the comment and support brother!
Love the clips Chris cheers so much pity your not in syd my car would be at your shop.
I got the 715 and order s split tip and cap man this gun spray super smooth. Thanks for the video on this gun
They’d probably send me one if I didn’t run everything😂😂
Gotta sign your work! 🤣
I'm using the Devilbiss DV1 S with a 1.0mm for base and then the 1.2mm for the clear and wow it puts out great results. I love your show, keep up the great work.
That is an awesome gun. Never got to spray one but have always been a fan of Devilbiss. I have the plus and had a pro lite
Chris im using a Prona R-4300 1.3 Tip does it all for me have had zero problems with the Gun it works for me happy indeed.
Wow, never hear of it. I'll have to do some research on that one.
This gun use much more air.
Mine goes well Chris does a ok job
I use lvlp 1.4 tip the black lvlp you showed us I like that spray gun I use the 1.7 it comes with for primer I have multiples of that spray gun!
My favorite .
Do you spray clear with the 1.4?
I use1.7 @@GarageNoise
Review a sata 5500 i just see alot of the channels always do the budget guns but hardly see any one do a 5500. I know they arent a budget gun but they are a investment and as with alot of sata's they will likely hold up for a very long time....and as always great content!!!!!
Beautiful finish great job
Thanks brother!
I have this gun as well as a PHS-155 1.8mm. I have all three Devilbiss dv1 guns and dont even use the dv1-c anymore since getting the prd-715. It sprays that good
Im really impressed with it.
Are you using the HVLP version?
Great finish I love that color and I spray with the Devilbiss GTI 1.3 and the Iwata 400 with a 1.4
Right on!
I like the idea that the caps and nozzles can be changed to adapt to whatever you're doing. I like that. It's going to save you a whole heap of money in the long run. You can do everything with the one gun... and to have the split nozzle technology as well.. FANTASTIC..!!
Yeah great fro hobbiest
Thanks Chris for another good video with good information. I ordered one of these guns and paid for it over 3 weeks ago but haven’t received it yet . My tracking shows shipped from CHINA but no details on where it is so hopefully it shows up
I enjoy all your videos so keep them coming !!
Oh that's a pain. That's the only problem right now no US distribution.
I'm using a 1.3mm tip on the Fuji 4 gun and it is a challenge! The Porfis PRD-715 seems great, I'm curious how it compares to the D1 Drizzle as a budget gun. Thanks for this one!
Looks great ! Job, well done on all stages ! I use a Iwata LS400 1.4 😁
Ibwould love to test outbthat gun hear a lot of great things.
Great video thanks 👍
Glad you enjoyed it
Is it a better lvlp gun or does the HVLP version also perform about the same?
Great job. Looks like a great budget gun
I and totally amazed at how much I like this gun. It's currently one of my favs, Porphis is sending out some more guns for review so stay tuned. Appreciate your comment and support!
Looks great nice job ,by the way what color. Was that
Thank's brother! The paint code RR
@@GarageNoise is that The paint code RR. By who
Question when making your adjustments for base coat what are you looking for when you are laying it on the panel
You want it to lay down smooth and not dry but not too wet. Too much material/not enough air is gonna lay down wet and orange peely. Not enough material/too much air and it's not gonna cover fast enough and it's gonna sand pile. Sand piling is gonna be rough and the paint/clear is not gonna stick and cause paint peeling. If it's too wet it's gonna run and cause uneven distribution/mottle with metallic paint. Air temperatures, material viscosity, and spray guns settings all come into play and you have to be able to adjust and compensate.
Nice work❤ ...Do i need to prime in the same day that i sand the car or its normal to sanding and preparing the surface than prime it after few days ??
You don't need to primer the same day unless you strip it down to bare metal. Then I would recommend it or the surface could rust.
Hi Chris, I'm pleased you like the PRD-715 as I had this gun on loan and the PRD-625 and both were great guns, as you said it lays the base really nice and silky and you got a nice flat finish from the clearcoat, I currently have the Porphis WP99 1.4 on loan which is a split tip and a side cup setup, while it sprays really well I'm a bit on the fence with the side cup setup.
If you want a really good gun to test the try the Meiji Finer Core 1.3CR which I also have on loan ATM and this is one of the best guns I have tried in a long time, I have the WS400 series2 and the X5500 RP 1.3CC but this gun is as good at half the price👌👍John UK
I amazed at how much I liked it. I've got three more of their guns coming for review.
I'll be watching out for the reviews Chris👍
what sagola adapter fit this gun? thanks . ever try this gun with a small compressor?
Good looking gun
👍
This gun has been popping up all over RUclips. Everyone has been giving it very positive reviews and it also helps that the gun looks really sharp. Do you know how it would hold up with a smaller compressor? I have a 30 gallon so I have stuck to the LVLPs but I’ve seen it on a few channels and I really want one lol
I just picked up a small compressor and plan on making alot of content with different guns using it so stay tuned!
I have question please i hope you answer is it good to use the blender and clear coat in the same sparygun like if u want to blend once u finished clear you put the blender in the clear coat coat and spary the area u want to blend clear im i wrong or no ?
Yes it can be done like that. Or you can spray straight blending thinner over the dry edge to melt it in. It's personal preference and results differ between brands of blender. They have aerosol blender too.
I have heard nothing but good things about porphis.. plus it is nice to see them innovate instead of copy someone else's design
I'm impressed with it.
What about the Bug did not have to wet & sand or Buff
No clear melted in and it looks good.
A1 Chris looks great
Have a cheep devilbiss 1.3 just got the ani scull edition I got the kit comes with 3 caps 1.3 one for base one for clear and a wb
Awesome!
What would you recommend to learn on and stick with for car restorations, between these guns for base and clear?
Looking to spend under $300.
Porphis 717
Master Elite 88
Black Widow
Drizzle
I have a 80 gallon 2 stage compressor.
Thank you in Advance!
Between those guns the new black widow or the Drizzle. Haven't tried the master pro 88 tho
when spraying sealer to get a smooth edge. do you think it’s better to use clear base or fade out reducer?
Clear base
Chris the kiwami 4 1.3 anf devibliss gti pro base coat paint gun
Great guns always dig Devilbiss guns and Iwata.
@@GarageNoise Chris HI I HAVE HAD THAT FORD FOCUS MK3 FRONT BUMPER PAINTED TWICE STILL NOT A EXACT MATCH HE EVEN USED A SPECTRO CAMERA CHRIS ON THE FRONT WINGS OR FENDERS SOMEBODY SAID ANDY BLEND ON THE WINGS OR FENDERS 800 GRIT AND GRAY SCOFF PAD AND CLEAR BASE BLENDER THE WHOLE WING THEN BASE COAT PAINT AND CLEAR COAT PAINT IS THAT RIGHT CHRIS ✅️
It is better than the bellaria?
Hi Chris, That bumper sure came out nice with the Porphis 715. UPK tried out the 135 model with so so results. Have you had a chance to work with this 715 since the review came out? Porphis also has the 717 with the split tip. Very fine atomization with it demonstrated on another channel. A little more money too. But the body of the 715 and the 717 are the same so tips are interchangeable. Would be interesting to get your professional opinion on it too. Thanks!
Yeah, I'm really surprised with how much I like that 715. It is a really nice gun. Puts down a beautiful finish, I have sprayed with it again since then and more great results, so I really do like that gun. I did just spray with the 629 I think and I've got a video coming out soon on that gun. They did send me the 135. That's their cheaper model, so that'll be interesting to see how it performs.
Hey there garage noise my name is Larry I live in Ohio and I have a dynasty lvmp spray gun just got done spraying my motorcycle cowling with some lacquer paint and clear I think I found that gun on Amazon you might want to try that it has a CFM of 10 it's a nice gun might want to try that
Intresting, I'll check ot out lvmp never sprayed one.
Great video, Chris.
TCP Global has their Master Pro 44 spray gun. It comes in under the price of the Porphis 715, at around $150USD, and gives similar results off the gun. I've only see Paint Society and Mario Paint Class give reviews on it, and thought it would be awesome getting your feedback as well.
I have looked at that gun and thought about doing a review. I have some more Porphis guns coming a entry level gun and a split tip and another one. So maybe after that.
@@GarageNoise Awesome, I look forward to those videos
How easy is it to get replacement parts for this gun.
Honestly not sure but they have a website to order guns and parts I believe.
How do you clean such guns after use?
Just run thinner through it, clean cap and use a pipe cleaner brush. You could also spray a little thinner through it as well.
Cool new brand of spray gun. Do they have a LVLP? Is the PHS-135 MP TYPE the lvlp version?
I asked for the gun with the lowest air consumption.
Technical Question, Do you have any suggestions how to minimize dieback using Finish One Overall Clear. I always end up cutting and buffing after a couple days when I use it. Love your videos
Die back is typically caused by waiting too long in-between coats of clear. Apply you second coat a little bit quicker and see how that works
Don't thin it out by adding reducer to the clear. This will also cause increased die back.
I'm getting the 717, the split tip version.
Currently using a Walcom Slim Kombat with a 1.3 for base and clear. And an AeroPro A-610 with a 1.7 for HB primer.
I'm watching from Australia as well.
If they send me the split tip I'll review it . Would also like to try that slim combat.
Hey man, I’ve got a question that I can’t get a straight answer for.
I’m spraying an Eastwood dtm epoxy primer and it says you can recoat within 4 or 5 days. I sprayed it and was going to go over with a 2k after an hour and a half but it’s still a little tacky so decided I’ll wait 24 hours. My question is do I need to clean the epoxy primed panels when I prime tomorrow or just tack rag it??
Thanks for reading this novel lol.
Just tack it down.
@@GarageNoise ok. Should I not be concerned with anything settling on it overnight? Planning on doing it tomorrow. I’m new to this and understand wax and grease remover is a no no on primer is that right? Thanks a lot for the reply
You should do a review all thier guns that would be nice explaing the difference on all three or jus a quick explanation of the 3
Which three? I'm open to doing something like that
For jus explain the difference between all of them from the 60 2 the most expensive if u don't mind
@@manuelmejia76 well, I will do that I still need to figure that out myself. However they are sending me Three more guns. I totally surprised at how well I like this gun I reached out to them and they are graciously sending out some more.
Thank u
U should do a giveaway with these 1s lol thanks 4 ur time
What’s the air consumption look like ?
10.5 with this gun
Hey brother what compressor are you using
Ingersoll rand
I use AEROPRO r610 lvlp gun(i'm a beginner) but this gun looks really interesting.
Which air compressor are you using?
I'm using a large air compressor. I will be doing some test with a small compressor tho
Kinda unsure about the Porfis. Kinda rare that I purchase online from an unknown company. Curious why know resellers?
I don't think they have secured US distribution yet.
Seems Legit. Nice gun!
It really seems solid
Is it me or is that clear as good as comes out of the Sata?
I wish I could still see to paint😂😂
@OldBondoBilly
Yeah I bet that’s tough. I can see with one eye but my lungs are sensitized to even slight toxins. Sure had fun while it lasted though👍
What do they say they charge for that gun ?
240
I use the black widow 2.0 1.3
I have arsenal of guns but 3M performance is my go to gun.
I dig that gun, I dont get to use it enough
so what makes a Sata, DeVilbiss or Iwata worth 700-1100 dollars compared to this 220 dollar gun? Do the high end guns really spray that much better or are companies getting more greedy?
Some would say build quality but I feelblike the build quality on this gun is great. The quality of these budget gun has really improved over the last few years. I don't really see the difference in dollars to be honest. If you can paint you can paint no matter what gun you use. I feel like it's a plus to learn on a budget gun it make you a better painter. Some of the cheaper guns are more difficult to get dialed in to achieve the finish that your looking for. So some of the high end guns can be easier to use, but not all. I found this gun to be very easy to use and I have no affiliation with this company.
Looks like a well built gun but not for a small air compressor
👍
What paint code is that?
RR
man, site is pretty much sold out of a lot of things or it is down
Most stuff on Amazon are out of stock everything as normal.
Yeah, that happens alot
👍👍
👍
Spectrum hte 1.3 base lph 400 clear
👊
Best gun under $300?
It might be. The Iwata kiwami is close. The black widow is close. I think it is out of the ones I've tested.
F1RST
👍
I have trouble hearing gun name I'm deaf....
Phorpis spray gun
Porphis 715
Sata Rip Off ?
No, it's not a clone
Air hog