Tacoma Ball Joint Flip
HTML-код
- Опубликовано: 4 июл 2020
- This time we do a suspension mod to the tacoma to get an extra 1.5" lower
#Tacoma #DriftTruck #Drift #Toyota
Like Comment Subscribe and Share with your Friends
Find Us on Instagram @b.a.performance
also on Facebook
check out our other episodes with BMWs, Drift Trucks, Hondas, Rx8s, and Car Shows
Thanks and Please Enjoy the Show 
Авто/Мото
Hey man awesome video.
I noticed that you have rain guards on your drift taco… are they in- channel or out. Also what brand are they. Thanks again for your vid
I have out of channel ones from AVS
Proceeds to try this at home
I need help with my stock Tacoma is their any way or other aftermarket ball joints that I can use I’m afraid. If these stock ball joints they snap on me
OEM ball Joints are the best. This is the Cheap way, and do not recommend this for street driving. their are better options like lowering knuckles, and custom coil overs.
any tips for lowering a 4x4 ? Ik it’s frowned upon but I’m really into the idea but don’t know where to begin
I dont know either, if you I torsion bars I would start there.
I’m doing the same thing, if you want I could show you how I did it through Instagram
It's not going to put more stress on the lower ball joint, it's literally going to stay at the same angle as before. The upper may see a little more stress without the kit that flips it but they don't see much force anyway, except when turning.
Hey man could you tell me the hardware you replaced the lower bolts with, thanks
Do you think this will work on a 2006? 2.7
Where u get the front lip bumper
It's chopped off part or a 98 ram bumper
Wheel size !!! Ima lower my 4x4 I’m just so confused on wheel size
18x9.5 off 350z
Where can i get those wheels at?
Where the part for the top ball joint
You only do the lower ball joint, for this mod
Do you have aftermarket suspension or it drops that low with just the ball joint flip
It also has 1.5" cut springs
@@BAPerf oh ok thank you for the reply
How much did it lower ?
About 1.5"
@@BAPerf thanks man how much can the front end lower without hitting the bump stops ?
Whered you get your wheels?
They are hand me downs from friends. I think their like 19" ADR sterling
How does it ride?
it also has cut spring and giant wheels. so not great. actually set them back for more steering angle
@@BAPerf you ever get around to trying the cut/weld mod on the LBJ? gave me a much shorter ratio and more angle. 2 events so far. Was gonna ask what you did for additional angle.