Burn Card Maker: Recover Totally DEAD Amlogic Android TV Boxes - Short Pin Method
HTML-код
- Опубликовано: 19 авг 2024
- In this guide we show you how to use burn card maker to make a bootable SD card to reinstall android firmware onto your Amlogic Android TV device.
This tutorial also explores the SHORT PIN method, which can be used for devices that are not only unresponsive to Amlogic USB Burning Tool, but to other recovery methods.
We view this recovery method as the very last option for users with totally dead and unresponsive Amlogic TV boxes and need to recover the device.
Please only attempt this is you fully understand the risks associated with opening up electronics, the MXQ Project takes NO responsibility for any issues that may arise from following this guide.
Website Tutorial: mxqproject.com/...
Burn Card Maker Download:
---------------------------------------
Website -
Forums -
Facebook -
/ 1000230693405502
Twitter - / mxqproject
-----------------------------------------
Music by www.bensound.com
Awesome TV Boxes Check Them All Out Here
www.gearbest.c...
Check out the Beelink GT-King
www.gearbest.c...
Budget Freindly TV box
www.gearbest.c...
True Force of Nature TV box: Beelink GT-King Pro
www.gearbest.c...
Gearbest Deals Page
www.gearbest.c...
Gearbest Mobile Phone Deals
www.gearbest.c... 
Хобби
Awesome TV Boxes Check Them All Out Here
www.gearbest.com/tv-box-c_12313/?lkid=78003117
Check out the Beelink GT-King
www.gearbest.com/tv-box/pp_009284337237.html?wid=1349303&lkid=78003165
Budget Freindly TV box
www.gearbest.com/tv-box/pp_009704434969.html?wid=1433363
True Force of Nature TV box: Beelink GT-King Pro
www.gearbest.com/tv-box/pp_009608757058.html?wid=1349303
Gearbest Deals Page
www.gearbest.com/promotion-Double-12-special-3908.html?GB_regular_191210_157597612_i12&eo=8V46WLP7ZOBCTV15&lkid=78003195
Gearbest Mobile Phone Deals
www.gearbest.com/cell-phones-c_11293/?GB_cellphone_gb_191209_1575886435_y12&eo=CZC417HDMLI2LS0R&lkid=7800324
Sir plzz you send email address plzz solve my problem
For those with boxes whereby you can't find the original stock rom, yours may be a clone of another well known box. So find the firmware of the box closest related to yours. And fingers crossed it should hopefully work. I found out my AGD NextGen 1.3 was an amlogic QBox s905 clone so I flashed the stock rom for that.
The short pin method works well. I've used it so many times. Even used it to install a custom rom. It works flawless. My box is never bricked thanks to this method.
Thanks MX.
The card burner looks muvh easier then usb I will try it today.
Thanks wish me luck
Good God,
your a genius!! now there is no need to use the "usb burning tool", this software will convert the .img to a flashable sdcard!!!
thanksssssssss thankksssss I had a MXQ s805 red light black screen, I made the sd card image and insert it into the mxq and it booted up!. Now it works. Awesome.
Brilliant, glad it worked for you.
Hey ,where you find software img ,please send link to me ,thanks .
Hey Juan can you share what you did step by step and where did you find the firmware for the sd card. I also have that same problem.
Thanks Mxq Project. I thought I messed up the box even more. I continued and tried and tried again. Then i persevered. ✌
Thank you very much for your tutorial...Able to revive my bricked amlogic x96 max x2 device..Thanks a ton..
X96 Max S905X2 back to its life.
Thank you so much
I had tried it yesterday and it worked
thanks, mate, thanks to you, w95 (S905W), i ran TVBox.
I think the tip a lot of firmware tutorials miss is to back up the old firmware before making any big changes to it
theres nothing to backup in the situation outlined in this vidio
I have S905W. I tried installing atvx android 9 but now its stuck on ATVX logo. reset button is not working.
Hi. First of all, thanks for your time and video.
Unfortunately my box only showed green screen by 5 ou 6 pairs of contacts when shorted.
Could you please advise me if is there anything else that I can do?
Model X96
Amlogic S905X Quad Core ARM Cortex A53
2 / 16GB
I'll appreciate if you can help me.
Thank you.
Hi
I also have a x96 tv box and it shows only red light did you find any solution?
@@medreda2254 Yes, I did. I've found a solution that use a steel wool shorting contacts (ruclips.net/video/hY3x4tNxXWE/видео.html). It's working perfectly so far.
do not need windows 7, if you only have windows 10 you can rightclick the file program and click properties then go to compatibilty window and check compatibility mode and run this program in compatibility mode for windows 7
hi great tutorial , only probs i have is that i have a M8S box i cant find the right firmware for it , i have tryed a good few and none work , cheers inadvance
Stuck on the upgrading screen any ideas? In an upgrading boot loop now
hi!solve the problem?
Unable to find correct combination pin on my m8s pro althought you already point on the video, little bit frustrating now.
Thank your very much man perfect job
hy , can you possible help me?
i cant turn on my box with power cord, only by usb power from pc, and only my laptop with win10, not with second one, old win 7. This is strange. When i connect box with hdmi cabel with sony tv and usb with pc, because i opened the box i just press av button to enter recovery mode( samsung tv doesn't see box signal) i can enter factory reset but cant get anything from that, so i need to flash rom wich i have, but my box overheat and from blue light after 45 seconds goes to red and after 10 seconds turn off completly
should i try anymore, because i waist lots of time now on this problem?
Dude, Your video is owsome! I am having a nearly dead T95 max which is heated up too much . It is getting stuck up on boot. No reset mechanism works on it. After taking rest for two three days only it boots again and getting stuck while heated up. I expect your expertise in this field would be able to tell some thing about this strange symptoms.
I dare say it's probably a faulty box if it only getting stuck when it's becoming hot.
How would I do it with an a95x max I downloaded the wrong fireware and it'd dead I see the red light but no screen saying it's booting up
Where can I find old TV boxes for repair and use in various projects please?
P.S.: I have tried using the AMLogic burn tool, only to receive the error 0x10105002 (Romcode/Initialize DDR/Read initialize status/USB Control setup error) 2% in. Attempting to short the NAND chip's neighbouring pins with the micro SD card inside its socket (with the appropriate contents) also proved futile. The android box in question is a Tronsmart MXIII 4k TV box. I am kindly asking for an explanation and a solution.
Pin shorting did the trixk for my t95z plus i my have to look for a firmware but to see it alive is what i wanted to see
Please help me t95 box boot loter and nothing
hi. i did the burn card maker, sticked the sd card at my mxq s805 holded the av reset button applied power but the box iniciate by the sd card instead of install. in this case i still have to short cut it ??
Just saw your video my box had no markings but when I opened it open I saw M8 s812 but I can't find the firmware, it was openelec is it possible to just load stock firmware without openelec?
Right now I have black screen loaded wrong firmware. Still lights up and it connects to USB burn tool but on screen nothing even after hitting in the reset button.
Thanks
Unbricked H96 Pro Plus with SD card where I broke u-boot after unsuccessful armbian install.
i tried with burn card maker but no success. my mxq box don't have reset button. so last option was pin short method. i started shorting from pin 1 untill i found the correct pin. for my mxq pro+ 4k box the no reset button and samsung nand the pin short location is pin 31-32
Excellent . Well done.
[3GB DDRIII & 32GB EMMC] TICTID X9T PRO Android 7.1 TV Box Amlogic S912 Octa-Core Smart TV Box with 2.4G/5.8G Dual Band WiFi 1000M LAN Port Bluetooth 4.1 4K/2K H.265 Video Decode Android Box cannot find firmware anywhere in the internet world.
I've done a step like that, when I insert the micro sd and turn on the stb, the stb doesn't boot the microsd immediately shows the logo but is stuck on the logo, please help me
Does this tutorial also works with bootlooped devices? Mine just got into bootloop and I don't have any male to male usb cable.
The green screen info helped me thanks.
Good night sir I have a tv box,,MXQ-4K when I plug it in, it goes straight to the green light, but there is no display nor connection to the tv, please what can be done?? Thank you
Hi, I have two tvboxes. V88 mini II. It remains with the red light on, I have made your instructions and it has worked, the part that does not work is the firmware, there is no firmware for v88 mini II, since the wifi or works, only by network cable. The other tvbox is M8S pro. This one does not turn on any light, touching the tamoco pin. Does nothing. Current comes to him, I know it because heat reaches the processor
i got an 802 m8 i ran the wrong firmware it bricked red...the USB burning tool works i just need the right rom i searched and bought but nothing works 2 days straight and I'm steadily going backward...
Does this work for a95 x max
So helpful, but i was looking for some help for A95X max 905X2 red light and no display!! :(
Much thanks,
i have MXQ PRO 4k 5G box with 2gb ram and 16gb memory. it was working good but sudden it stuck on blue light and android boot screen only. i tried to do hard reset but seems that reset button which is available inside AV slot is also not working. i have downloaded latest firmware and uploaded the same on my sd card with Burn Card Maker and then i tried to upgrade firmware with sd card after connecting my sd card into USB card reader and then to MXQ Box. but still it shows only android on screen and blue light in box. Any advise or suggestion please....????????? its Rockchip RK3066 . please help me.
also my box do not connect to Laptop (window 10) i think this is due to reset pin not working.
Every time I download the ROM and unzip or trying to mount it, it says the image is corrupted. I tried a couple of other ROMs as well as different PC but no luck.
Update I thought I'd completey bricked my x96 air but the boot screen has at least changed the OS back, it has not loaded up yet and has been on that screen for a while, at 1st it just turned itself off and didn't reboot just darkness no lights but I put the power back on after panicing then left it for a while and abra kadabra we are here, if this doesn't work it would be only because I flashed the wrong image file or pulled the plug to early thinking it died... either way this tutorial is the right track as force recovery mode is a good final option
If its not a hardware problem 💯
Will keep people updated with progress and my specs if I get it fixed as the legitimate x96 air 4g doesn't seem to have as many good tutorials as other TV boxes for some reason plus the "X96Air_P3_20200831-1753" image is probably the image I actually need rather than the "x96_a1000_20210531-1609" image for my x96 air s905x3
My M8S pro stopped loading. Didn't do anything with it (no root, no fw updates, nothing. Started lagging and I rebooted it then it got stuck). Basically, it doesn't even get beyond the logo screen (not even the colorful 'MBOX' but some basic-looking 'mbox' - yes, all lowercase).
I only had it for 4.5 years (but it was mostly turned on 24/7, tho I was only watching movies like about 2/wk).
Do you know if those boxes designed 2 last?
It doesn't have a 'reset' button, so i haven't tried 2 short any pins 2 get to Android recovery... So not sure if this is simply hardware failure and now it's plain dead box or something...
hi i have h96 max x2 and stopping 7% can you show me how fix it please
i found the similar chip on my box. however it is an MX10 pro 6k. couldn't find a firmware! what a bummer
My device refuses to accept Burn card, refuses to accept USB Burn tool and when I boot it to TWRP it refuses to flash cos "Size of image is larger than target device". Its running Magendanz's ATV Nexus image. The reset button doesnt do anything. Any clever ideas anyone PLEASE?
I have a tablet with a Rockchip RK808B. I need to know how to manually reset it (short it) via the jumper switch on the motherboard. The Rockchip RK3368H is on this motherboard also. I need to know which pin or pins I have to short out in order to try to wipe it. Any help would be appreciated & if anyone knows anywhere else I could find this, that would be awesome too. Thank you.
Hello thanks for you're help!
I have the T95z Plus 3GB 32gb
Haven't completely resolved the issue but you have got me somewhere:
So following your steps putting firmware on the sd card then I had to go to the last step and open up the box and short the pins. It booting up straight to the firmware when shorting it (not updating & reflashing the box)
Anyway after booting up to the box I put twrp(recovery.img) and poison rom on the SD card. Downloaded terminal and tried to reboot into twrp through the terminal:
su
reboot update
It then hung on the black screen like it did when it was bricked so i shorted it again using the method then it went into twrp
I then went onto install poison rom onto the box booted up fine.
Go to turn the box off then turn it back on again and it doesn't do anything until you short it.... then it boots up again just fine... also if i take the SD card out then try turn it on then short it it wont do anything its like it needs the SD card in to even boot?
Maybe its using the SD card as storage and not the internal storage?
I'm not sure, Im might just solder the 2 pins I use to short it together then that will be that?
Thanks again for your help
If your box is booting to android, this method is not required
@@MXQPROJECT it only boots when:
If the sd card is inserted
And
those two pins to shorted are bridged.
So i could turn it on normally wait forever and have no signal
Soon as i bridge the shirt pins it boots straight away 🤔
That's a new one for me
I have a magicsee iron 2gb 16 rom with red light this method doesn't work i need to get into mask mode by shorting pins on nand but dont which ones anybody have this box with same problem?
great tutorial. it helped me.
i need firmware for s812 M8S android box modem that has no problem with wifi and the remote
can anyone help ?
Does this option work on mecool km7 4gb ram 64 rom ?
No ansver yet?
My km7 is red light and black screen.
Did you try it?
my mxqpro 4k is totally black screen on tv, pc dosent recognized only blue led is open help
I have a w95 and it won't power on with the power cord plugged in the outlet but when I plug it in USB to USB to my computer the blue light comes on I've used multiple power cords can you help me figure out what is wrong? Also do you know which pins to short out on my box to w95
Great video thanks, I have a TX 9 Pro brand new however I get a ddr romcode error when using burning tool, do you think this would work ?I get no HDMI out and ive tried hard sresetting it but nothing.all I have is the TX Pro Blue lighting lighting up.any help appreciated even better if u know pins to short it out lolthanks
Mecool m8s pro w red light not show in Screen please fix it. @MXQ PROJECT
Means to say it shows red light but when short reset button it shows blue light and screen was like a tv monitor which svows some cloudy screen like no channel in t.v shows.
Hii. I have a BTV B8 box. I don't find a imagem exclusive for the device . And don't know Which pins i have to shortcut. Can you help me ?
same problem for me updating with PC other system installed and now even no display... all damaged....mxqpro 4k
tried to to change my firmware for my x96 air s905x3 4G and got stuck in a boot loop i tried to reboot to system still boot loop, reboot to bootloader (it freezes) clear cache and factory reset has not helped, I can still boot into recovery mode but at this stage, I'm think to just flash the OS to SD and use it boot, at this stage I'll try anything 😔🤔... any help would be very appreciated.. thanks in advance
PS if only someone made a hackchi2 ce like universal installer specifically for tv boxes everybody's life would be easier
I'm looking for firmware (stock preferably) for a MXQ Pro 4k (S905) with RTL8188, I tried a newer firmware and I don't like it and Wifi does not work, I would like to go back to original. Thanks
I have x96mini, 2Gb 16Gb amlogic chip, unfortunately got power off while updating from SD card, now it is showing only red led while power on.
Plz help
How upgrade Version Firmware M8s+ ?
I am facing issue.in my MXQ Pro 1GB/8GB Only the blue light on front and stuck on android boot logo Please help me . i trying toothpick update so many time but sadly not success , and please share suitable software tools link wich is work with my box........
Hi , Could you please tell me how I can unbrick my TX3 mini clone red board v1.2 2017_09_25
Hi there, for the m8s pro what is the number of the two pins to contact, are 6 and 7 (left o right side)? thanks a lot
Do you only plug the power cord in once while switching between the pins, or do you have to unplug and replug in the power cord every time you change pins until you short it out
Nah just plug in and cycle through pins and see what happens - can vary it until you get a result
how to flash the mecool KIII pro firmware into the magicsee c400 plus ?
hi sir help me to resolve my android box MXQ 4K
that is stuck in red blue light when i trying to flash rom .
Great job. can u pass link to armbian mxq pro 4k s905 Wi-Fi ap6181
Hi, i'm getting L(1005) UBOOT error, I'm trying to burn MXQ-4k RC3229 img. What could be the problem? thanks
Does it work with usb or it have to be sd card?
Please can you upload mxq pro s905 ap6181 . Or link to stock firmware and armbian .thank you
i have byintek moon K 15 projector (amlogic S095X) and i had a installed atvx firmware via usb burning tool and its not working my projector and now i not able to install firmware via USB burning tool so tell me what’s happening it ?
how i recovery my Android system?
Intenta con otro firmware.
Suerte.
I am facing issue.in my MXQ Pro 1GB/8GB Only the blue light on front and stuck on android boot logo Please help me MXQ project. Do I need to try short pin method? and please share software tools link
Video starts at 2:20
It didn't work on my X96 max plus q1
Do i have to short the pins and then add power? My Box is dead no screen. usb burning tool not detecting hub. also when shorting pins should the reset button be held in tool
Apply power then short pins 'just be careful to get correct pins' some box's have pin's detailed on forums like freaktab
Hi, short Pin Method for Beelink Mini MXIII-II please
Hi I have an m8s tv box but can't find an image file to recover it it's a 2.4ghz/5gb android box.
Hi,
I bricked my M8S OTT box. I tried several methods and tutorial from online. Nothing helped.
How can I fix it? How do i find the right stock firmware or android installed in my box?
Please help.
Much appreciated!
I have Nexbox A1 S912 chipset android 6.0. Root access is already messed up and it is not working. I cannot boot to android recovery mode. I want to load some other ROM. Burn card method is not working also. What should i do ?
short cut in memory pins. Good look..!
I did the sd card burner . but whe I start it said on tv upgrading and ligt went off
Now box is dead no signal at all
Can you tell me what i did wrong
My box was. M9spro
4g.
And I said was because is probable bad now i ilooen it carefully
And doesnt smell burn but. Im lost now.
If you can help me will be very appreciatte
Hi, can You explain how to use this method in Mecool K1 PLUS? I have this error all the time in USB Burning Tool:
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
MXQ Project does this also work for MXIII 4K ? And the tv says no signal but the box turns On Blue light and Off Red light as it does have power, will this work ?
IS IT FIR usb PORT OR sd CARD?
Hi, it stuck at every time on the android red cross on a screen what should I do now.
I’ve got a bricked M8N. Made in 2014, going to have a go at shorting the pins now, was wondering if I could load a version of Linux and have it as a mini desktop?
Which SOC does that have?
@@MXQPROJECT im fairly new to this, how do i tell? i suspect its a clone device but not sure
It will be either a S802 or a S812 - either unfortunately where garbage when they made them. The only decent TV box from that era is the MXQ S805, but pretty sure M8N branded device have the mentioned SOC above.
Good evening you can help me, I have an Android Tx5 box with 7.1.22 davepaid firmware, I installed and messed up everything because I'm in Italy, I can't bring it to recovery mode gives me this error as I can do, thanks .. the program has encutered a fatal error and will close
The dump file crasch.dump is at same directory with the program
Please send us the dump file to help fix the problem
I did the same thing as you did on your tv box but mine its just bricked and when i plug the sd card it just stays in that dawn logo
Nop, es que no estás haciéndolo bien. Debes picar en el reset con un palillo y sostenerlo mientras le conectas la energía, esperas unos segundos y así la caja comenzará desde la tarjeta SD.
Suerte..!
Sorry for the box and Tx5 amlogic s905x
PLZ share
T95M 2G/8GB latest firmware link plz version >= 6.0
Mxq s905x RTL 8189 stuck on red light. please help
Hi can you help me with zoomtak m5plus It turns on, but does not load, does not display anything on the TV, neither the word "boot" or "the clock" . tried connect to pc with usb 'a' 'a' cable with USB_Burning_Tool but pc not see it then tried with sd card, and still nothing.. I have totally different mother board.. I can send a pictures...i hope you can help me...
I cant find any chip on my motherboard that has that many pins and I need to short the pins, what do I do?(I have a Leelbox MXQ Pro Mini S905X
)
There is no proper software support even I am not able to fix my bricked mxq pro
good morning, please let me know, when you touch the screwdriver bettween pins your device are connected to the power
yeah
cual es el test point de MXQ_RK3229_V1.1 2018.09.27?
hi i just purchased h96 max h2 colorful edition just after 2 days it stops working only blue light shows when plug in. can u help me pls. thanks.
need to use rockchip tool - install firmware - use our rock chip recovery guide - this video is for amlogic
I can't reach website
Awesome Awesome Awesome
hi there Andrew here i think you will need help,helping me with my
Minix neo x5 its been sitting in my garage for some time but i'd
like to get it to run with a new firm/kodi how can you help me?
How long does it take to write the flash?
(MXQ pro 4k)s905w android 7.1
It responded to the jump
one grey progress bar (smart tv logo )Then second grey progress bar then green section.
I left it for an hr and it didn't move .
Did i possibly not have the right image or missed a step when i made the sd card?
same for me, did you found a solution?