Ford Focus ST225 - Oil Filter Housing Replacement
HTML-код
- Опубликовано: 12 сен 2024
- Replacing the oil filter housing on the Focus ST in preparation for a track day, the breather seal had failed and was blowing oil out and also the idle would hunt at times, weather that's related or not, time will tell....
Genuine Ford parts used, part number : 1 781 598
couldn't find any torque settings but I used 22nm and it seemed like I nice place to be.....
PLEASE LIKE, SHARE AND SUBSCRIBE TO THE CHANNEL.
Subscriber Count : 988
Instagram : GregElgood
Email : Gregelgood@gmail.com
#ford #st225 #carrepair
Good to see this video, taking on this job my ST on this weekend
Good luck, it's simple enough to do.
What size tap did you use ?
Correct Torque specs for the 4 x M7 bolts is 17Nm as per Volvo VIDA 12:30. The guy who said 10Nm in the comments is wrong.
Bolts will only get rounded off by using the wrong socket like a 12 point. You need to use 6 point sockets to prevent rounding.
Is there a gasket kit for the Oil Filter Housing? Mine is leaking from the front of the housing...
The new unit came with new gaskets, I'm sure you will be able to get the gaskets separately from ford.
If it's leaking from the front, I would say the top plastic cover is faulty which means you probably need a whole new unit.
@@gregoryelgood That's what I was expecting unfortunately 😔
Thanks for the info 👍
@MartinJones123 after replacing mine, it still chucks oil out, so don't even think the old one was faulty. Replaced all the hoses aswell with new genuine ones. Think I must have bore score or it's leaking through the valve stem seals, creating crank case pressure. Only happens when I send it though not on normal driving.
@@gregoryelgood That's no good at all! What are the symptoms of bore score or valve stem seal issues?
Mine seems to be leaking around the plastic lid area...
Its 10um