Although I may never do a swap like this, it's not hard to see the excellence in your work. Really nice job Lucky. Thank you for having us over. Be well.
The CV radiator fits beautifully in the opening of the 65 core support if you raise it up a couple inches. Like it was meant to be there! I crossed this bridge on my own build :) Looking great, wish I had the patience you do!
I was thinking about what you said about drilling holes in the bumper if needed for cooling. How about cutting rectangles to mimic the shape of the signal lights. That truck is going to be sweet. Love it.
Love the build. I recently did a f250 crown Vic swap. I’ve put about 6000 miles on it so far and love it. BTW why don’t you have more subscribers. Your channel is great. COME ON PEOPLE, SUBSCRIBE!!!
Will you be doing the hockey puck trick between the cab and bed of the truck like you did on Crown Hick? That really seemed to stiffen the whole body/chassis up.
At the 0:21 mark. Is that a exhaust cutout coming from under that Ranchero's fender.? Something that you don't see very often anymore. And do I detect a little bit of a limp Lucky.? Hope everything is OK. 6=8.
Please let me bring my 84 C10 project to your shop, easy project (HeHe) LS3, Tremec 6spd, re-wire, coil over and everything thing else. Close by Temecula
I don't mean to tell a guy how to work, but you really should wear some gloves / sleeves if you are going to weld that much. I would have a heck of a sunburn if I did that.
That being a cop car I wonder what it’s been through. I wonder if anybody out there Ican connect the dots and tell us what the car is been through in it’s past years.
I nearly daily a 2007 CVPI to keep the mileage off my 17 f250. It was a former el centro, CA fire inspectors car. 230k miles but only 320 idle hours. I’m sure it just drove around to fire scenes. I am also doing a swap like this with a 2008 former Las Vegas metro pd cruiser and a 1969 Sweptline. When tearing the 08 apart I found a lot of those little pouches to test narcotics under the trunk liner. Also found 2 pocket knives behind the wiper cowl plastic. My guess is they pulled the knives off suspects and left them on the roof then they slid down the windshield next time they hit the brakes. I’ve read that some guys find lots of strange things when tearing into the old cvpis.
Hi Friend, Your vids are awesome! This is Alloyworks! We specialize in the production of automotive radiators, heat exchangers, and cooling system components. We're wondering if we could collaborate. Would you like to put our products to the test and review them on your channel?
Iv always loved this truck the most of any&all of what came outta hotrod show
Thank you
Heck Yeah!, drill some holes in the front bumper, for better air intake for the twin turbskis!.
Really, really sweet, Lucky! It's lookin' factory, bud! I sense shenanigans in Whitey's future...✌️♥️🙂🇨🇦
The world is built on ugly welds that will hold! Looking good Lucky 🤙🍻
nice to see some fords in the garage too,i like a good mix
Me too!
Although I may never do a swap like this, it's not hard to see the excellence in your work. Really nice job Lucky. Thank you for having us over. Be well.
The CV radiator fits beautifully in the opening of the 65 core support if you raise it up a couple inches. Like it was meant to be there! I crossed this bridge on my own build :)
Looking great, wish I had the patience you do!
Those teardrop wheel wells are really making the truck look amazing!!! A lot of the older cars have great looking wheel wells on them!!!
Really enjoying your videos. 👍👍
Pretty cool build.
damm so many cool toys in 1 space
Truck is going to great
Oh, " fit " the bed, I thought he said something else. LOL.
You’re thinking of Puddin.
No matter how many times I see that Col Sanders sign, I always chuckle and think to myself. HOLY SHIT HE DOES LOOK LIKE HIM!
Hell yes... Love Whitey Ford. I'll bet you need to mini-notch for the driveshaft as you mentioned.
Even Lucky's garage floor has patina. NICE. Truck is looking good.
Thanks for watching!
Great video first thing in the morning nice pearl white Ranchero LOL😃
The naming of the truck it's perfect it's going to a really nice lucky cruiser 💯✌️🙂
Looking good 👍👍
Thank you! Cheers!
Hell of a transformation Lucky ! Looks marvelous! Should be all down hill now ? That's what sticks said ! Lol !
Diggin' Whitey Ford... 🤘
Great to see sticks back in action.....
Love the content ... Thanks for not having the head banger music.
Coming out great Lucky can’t wait to see you bringing it to a car show or flying down the hiway 😂😂😂!!!!
Sweet.
Thanks!
Mornin Lucky. Thanks. Coffee sip!.
Thanks for watching!
Nice Job Lucky I think Ill raise my cooling system up a bit also!!! I Enjoy your builds.
I was thinking about what you said about drilling holes in the bumper if needed for cooling. How about cutting rectangles to mimic the shape of the signal lights. That truck is going to be sweet. Love it.
Looking good 🎉 real powder coat, some of these guys say powder coat and then you see with a rattle can 🎉
Looks great Lucky.
Looks great!!
Dont forget, You need to box in the cab corners where it was cut.
You cut off the "Picasso"/inspired uneven shape cross members... I was just warming up to those Lol. Nice clean job ..
hey there big fan here !!!! got to ask how many people work for you the amount of work seems a bit much for one great mechanic !!!
What’s up Lucky?! Your going ford fanatic now?! Nauhhh, just kidding. Truck is coming along nice homie.
Love the build. I recently did a f250 crown Vic swap. I’ve put about 6000 miles on it so far and love it. BTW why don’t you have more subscribers. Your channel is great. COME ON PEOPLE, SUBSCRIBE!!!
Another great video. One question, what is the special fuel pump called, and how is it better?
Lookin good lucky! Have you given any thought to what wheels you are gonna put on the truck?
Will you be doing the hockey puck trick between the cab and bed of the truck like you did on Crown Hick? That really seemed to stiffen the whole body/chassis up.
Would it make any sense to do your isolator trick (hockey puck or not) in between the frame and the body?
Saweeeeeet
Lucky fried chicken 🍗 🐔 😂
Coyote hell yeah
where is lucky's garage located im a follower he's very good I want him to work on my car suspension one day if I can afford him
The truck body on a Crown vic will be a cruiser? I see what you did there.
🏁👊🏻
Off topic here but will project x be getting a hood? I know that motor is tall.
Did you already paint up the new bed or is that the old one?
At the 0:21 mark. Is that a exhaust cutout coming from under that Ranchero's fender.? Something that you don't see very often anymore. And do I detect a little bit of a limp Lucky.? Hope everything is OK. 6=8.
Lucky get some gloves to weld...
Please let me bring my 84 C10 project to your shop, easy project (HeHe) LS3, Tremec 6spd, re-wire, coil over and everything thing else. Close by Temecula
9 mins in and suddenly the intro music to another channel I sub to starts, had me confused
I thought I had accidentally clicked on Abom79 was confused also
I don't mean to tell a guy how to work, but you really should wear some gloves / sleeves if you are going to weld that much. I would have a heck of a sunburn if I did that.
Had a guy in our shop that did all of his welding in a tank top. His chest was as red as anything you could imagine.
Not mention skin cancer
That being a cop car I wonder what it’s been through. I wonder if anybody out there Ican connect the dots and tell us what the car is been through in it’s past years.
I nearly daily a 2007 CVPI to keep the mileage off my 17 f250. It was a former el centro, CA fire inspectors car. 230k miles but only 320 idle hours. I’m sure it just drove around to fire scenes.
I am also doing a swap like this with a 2008 former Las Vegas metro pd cruiser and a 1969 Sweptline. When tearing the 08 apart I found a lot of those little pouches to test narcotics under the trunk liner. Also found 2 pocket knives behind the wiper cowl plastic. My guess is they pulled the knives off suspects and left them on the roof then they slid down the windshield next time they hit the brakes. I’ve read that some guys find lots of strange things when tearing into the old cvpis.
👍🇺🇸🫡
Thanks for watching!
Hi Friend, Your vids are awesome! This is Alloyworks! We specialize in the production of automotive radiators, heat exchangers, and cooling system components. We're wondering if we could collaborate. Would you like to put our products to the test and review them on your channel?
Sounds great! Please email me.
@@luckysgarageshow That's good! Thanks for the reply. I'm sorry I didn't find your email, could you please send it to me?
Looking good!
Thanks!