How to Install a Schlage B Series Deadbolt (B60/B62)
HTML-код
- Опубликовано: 25 июл 2024
- Schlage’s B Series (B60/B62) Deadbolts add an extra layer of security to your home, and are incredibly simple to install. This video walks you through each step of installation to make the process even easier. Click here to learn more about Schlage Deadbolts: bit.ly/SchlageDeadbolts
Visit our website for more: bit.ly/SchlageLocks
Thanks for turning a dreaded job into one that took less than 5 minutes. RARELY are such clear instructions shared. Delivered in such a concise, understandable manner. ALL companies should take a lesson from this video. WTG, Schlage!
Easy to understand video. My husband and I managed to install the deadbolt in under five minutes, with no disagreements!
Nothing like a 50-year old man fiddling with a deadbolt for over an hour, only to have a beautiful young maiden explain the "written instructions" perfectly in less than 60 seconds. I'm not sure if I'm more thankful or humbled. :)
Well explained, but the deadbolt install is more complicated when replacing an older Schlage deadbolt in an existing door. Some of it not so obvious. I had to remove the side plate and this was clear on how to do that. Also with the diameter of my drill hole into the main door, I had to adjust the part of the lock that comes in from the side, with is discussed briefly in the video. If when go to assemble it, you put on the exterior face and when you go to install the back side with the turn latch, and the screws don't line up, you'll have to adjust the side piece coming in to make it longer. The written instructions are very sparse with few details, this video saved the day.
Answered a couple questions. But getting the actuator rod in the right position with the bolt set either in open or lick position so that keying works correctly is not shown. It is essential to show this.
An excellent clear, realistic presentation. Thank You.
I was going to pay someone $50 to install a new Schlage lock. It took me as long as this video. I LOVE saving $!
I just changed my deadbolt myself. Thanks for the help
Mission Accomplished ! Thanks for the video!
This was a life saver! The written instructions were truly awful. This saved the day. Thanks!
Thank you so much I am the kinda guy that doesn't usually read instructions and when I installed the first time there was a quarter in gap on deadbolt, I could literally see the outside. In the video you showed me how to extend and walahhh problem solved. Thanks again
Worked in 15 minutes after watching the video. Thanks
Thank you so much. I returned my lock by it did not fit but it’s bcc I did not adjust the backset. Thanks again going back to get the lock.
Question, what type and size bit should I use to open the hole on the frame where the bolt must insert?
So helpful! Made installation a breeze.
We installed two Schlage deadbolts and wanted to use the drive-in method as shown in the video but there was no alternate part to use after removing the existing face plate. Is this part only included in certain locksets?
Excellent video!
No where in this video does it show what size to drill the pilot holes for the screws.... definitely would like that included!
Went to Lowe’s, the cocky man pointed at a lock and said “this is all you need”. Turns out my door doesn’t fit the style of Schlage lock he said I had to have, even though I had Schlage on the door previously. My bad for thinking if a person doesn’t know what he’s talking about that he at least keep quiet.
Wonderful QUIET !
Mine with a trim plate had no anti-pick shield, instead I have this ring which I have no idea where it goes, not listed in the manual...
David Hsieh where does the ring go?
Thanks a lot and it is very helpful. May I ask a question? why the part Deadbolt of B60 and PD60716 has the same 1 inch in the installation paper. But actual size (diameter) of B60 deadbolt is larger than PD60716? I lost the key of PD60716 and then I bought a new B60 in Lowes store (only has this model), But I can't insert the B60 deadbolt into the existing hole. Thanks
Hello, I am not sure why you are having a discrepancy between the sizes but the B60 does require it to be 1 inch so if it's not fitting, I would measure that to ensure it is the correct size. Some alterations may need to be made. You can reach out to us at consumerschlage@allegion.com if you have any other questions. Thank you!
January 2022. This video is out of date. The new B62 is different.
Okay. I bought a B series deadbolt and I followed the instructions to a T. The deadbolt will not lock from the inside unless the key is inserted on the outside. Please help.
Hi there. Thanks for reaching out. If you could, please email us a photo of the lock, your phone and email and someone will reach out to troubleshoot or set up a warranty claim if needed. consumerschlage@allegion.com Thanks, Jenny.
So I had a door installed with this type of lock installed but I can’t lock it unless the key stays inside the lock and the deadbolt won’t move unless the key is in. How do I fix this?
Hello,
I am sorry to hear about the issue you are experiencing with this lock! This sounds like an installation error. We recommend uninstalling and then reinstalling the lock. Ensure the key is not in the deadbolt, also ensure the bolt is retracted while reinstalling. If this does not solve the issue please contact us at consumerschlage@allegion.com. Please reference your case number: CAS3385450.
Thank you for being a Schalge Customer and have a safe day!
-Alex
This is by far the best instructions. My husband put the part that has TOP on the bottom, had him fix that. Then he didn't use the part on the inside of the door. Men are so stubborn, he tried for 2 hours to get this right. He didn't even want me to google this, but thank goodness I did. Geez men!
Be grateful your husband even attempted to fix it. I have to do it myself or it would never get done.
If men would talk so generalizing about women, it would be the end of the world.
b360 please
I did this easily in my own door. But I got the same deadbolt for my aunt's house and I couldn't fix it because the key would not come out after it's unlocked. Maybe that unit is defective or something.
Hi there. Thanks for reaching out. If you could, please email us a photo of the lock, your phone and email and someone will reach out to troubleshoot or set up a warranty claim if needed. consumerschlage@allegion.com Thanks, Jenny.
@@SchlageLocksOfficial I used the key to try to get the deadbolt to work. Help!
Jill, Thank you for reaching out to Schlage Support. I am sorry to hear you are experiencing issues with your key. Please contact us directly at 888-805-9837 or email at consumer.schlage@allegion.com
Is there a Schlage video which explains how to fit a deadbolt that has a keyed lock on both sides of the door? i.e. a keyed lock instead of an internal thumb turn.
The only double cylinder deadbolt Schlage offers is the B62.
@eLocksOfficial Thanks for that. I've bought the F62 Z PLY 619 ACC model from a major retailer here in New Zealand. This is a double keyed model. Does the B62 instructional video also apply to the F62 too?
Yes, The deadbolts install the same, the B62 does not have a trim the F62 has.
@@SchlageLocksOfficial Thank you.
She’s so cute!
Ok you gave me confidence but, your way too fast . I had trouble with the thumb latch not turning at all but it worked with the key. Problem turned out to be over tightening. And the bolt wasn't level. You're a chat bot tried to shake me down for $ 5.00 to get the answer. I googled this guy up and he shows how to torque CORRECTLY!
ruclips.net/video/r8sofLePkb0/видео.htmlsi=AbJAVwdVhBNTbTcW
Code does nothing except lit up the orange light.
No customer service
It doesn't matter how good and strong any Deadbolt Lock is if your door jamb and/or wall is weak especially an interior installation.
Encode does not start up.
No customer service
Hello,
Thanks for contacting Schlage. I’m sorry that you are having issues with your Encode, but the video you are posting on is for a mechanical deadbolt and the troubleshooting for this lock is not the same. For Encode lock support, please contact us at 888-805-9837 or email at consumerschlage@allegion.com, and any agent would be happy to help. Thank you and have a safe day.
Does not startup.
This socks
Useless
Not helpful
Encode sucks