Crossed my mind, these scooters are getting a bad rep. Yet I saw a man in his 80's in the middle of the road on a mobility scooter and nobody bothered him. I need a mobility scooter. Four wheels. Comfy seat. Sabvoton or phaserunner strapped to it. A dragster style wheelie-bar and parachute on the back.
Ah you make the wiring look much easier haha. I did a little wiring repair on my kugoo kirin m4 pro 500watt. The motor wires were shorting out, acting as a phased brake with the scooter on or off. So. I ripped out the LED side lights because that shorted out from the snow last year. Then heat shrinked the motor connectors where it was shorting out. Put it all back together. And now my tail lights are not working. Brake lights work. It's a wire mess cramped in a tiny little space. I don't know what wire is what haha. I just left it and use a rechargeable bicycle tail light accessory.
U think thats cramped, wait til u try adding more wires such as indicators and a high beam front light 🤣 best thing i can suggest, is disconnect battery, then rewire using labels on the wires, where the wires aren't using connectors add ur own (or solder n shrinkwrap). If not sure what the wires do, just follow them to see where they go. Only attempt if you are somewhat ok with rewiring.
I have the same scooter. I found on the bogist website they have a 48v 20amp battery upgrade for sale.there wasnt much info onnit soni was wonderingnif i buy it ia there anything else i need and would it improve my speed/ acceleration performance and distance? Allso where can i purchase the new phase controler box you bought, and sorry one more thing how do i remove the speed limiter,
Great work Andy 👌 , I got both my boys the G Booster scooter I was on it as dads do had to have a wee shot I came off k.o concussion for a week ( I have been off work for 4 weeks so far still not right ( landed 10half stone onto the head ) please take care on them bud , my sons now have a full motorbike helmets on 🤦♂️
Interesting what you can do with these scooters. The motors can take quite a bit more than what they are rated at especially for a short distance. Great job.
very intersting. Would you maybe consider doing a beginner tutorial how an e-scooter works and how to know when a batteri is powerful or not ? I'm a beginner and really want to learn this stuff.
Just stick to name branded things. Never get anything you haven't done research on. I got the ninebot g2 and I'm happy with it. Hopefully mymax mods will do what they did with the first one where we can upgrade that model
I’m looking to upgrade this scooter possibly adding a bigger battery. Do you think it would be possible to add a second motor on the front and connect a second controller inside to operate the front motor. How large of a battery can I fit?
I second this. Please show us how to make more speed and torque on the evercross h5. They advertise 800w but the owners manual says 500w. It would be great to actually get the full 800w of power that it can handle
Great tear down!!! 👍👍👍 And build back up. I’ve just got the Emanba L-12 Pro as my first e-scooter and wondering if anyone has below info please??? Hey friends. I hope you are well!!! 🙏🙏🙏 Does anyone have the manual for the TF-191 NFC controller??? Finding it hard to find details as it seems new out??? Found generic manual for similar controller but the numbers don’t add up. Any tips for setting up the scooter first time regarding bolts and screws??? Should I use locktite on bolts u know i wont need access too??? Blue locktite so it can be undone with manual tools with a bit of force. Keep at the great reviews!!! 😃😃😃💪💪💪 Best regards, Scott. ✌️🙏✌️
I want to know how to make the wheel start rolling as soon as I press the throttle instead of having to get the scooter rolling before the motor will engage. Can that be disengaged? If so, how?
Hi Andy. Can you help... I have a Thorpe 30 e scooter. How do I pass the speed controller to get more speed. There are 3 thick wires green red and blue. And 5 thinner wires. Red black blue green and yellow
I have an Evercross H9 scooter with the new dash, 48 volt 800 watt motor 14aH battery and stock controller. and i realized they lie and say 28 mph.. by GPS is does 25 mph at best and i wanted to know if i can use maybe a 1000 watt or 1200 watt controller to give it some more speed..
I have an 800 watt Evercross H9 scooter with the 14.4aH battery, can I put in a 1000 watt controller to get the 200 watts more? Maybe just like 5 mph more without blowing the motor ??? And will it work with my display on the H9 instead of that circular Chinese style? Or will I need to replace it all?
Good day, Andy my friend you need to get a hold of these: Anti Spark Connector Male/Female XT90-S (Upgrading version of XT90) Working current capacity: 90A Peak current capacity: 120A Banana connector diameter: 4.5mm
not just about anti spark LOL voltage etc has to match or it fry everything. kind same when you. link up battery's together. to make a bigger one all has be same numbers
Could do with help on my scooter. Do I have to have a lcd screen. Can I not just hock the throttle and brake up to the controller or them 5 wires coming off it to make my scooter work. Or do I have to run it though a on&off lcd or obo 1st . Help
I own a bogist c1 pro and wondered if it was possible to upgrade the battery/motor/controller if so do you have any advice on what battery I could use and what parts I would need to complete the upgrade as I'm a little unsure on everything I would need. Thanks
Well done, if you have a 500w motor, this means the stock battery is 36v, what about the new bulky one?!! What is its voltage rating along with its 25 amps?!! How much did you pay for it?!! Can the new controller handle its power?!! What are the new controller specs?!!
i have the same re-badge scooter and thinking of a way to replace the controller. i hate the fact it has a built in cruise control i want removed. but doing so would make the lcd on the stem useless. is there any chance you still have this busted controller id love to peek inside it
HI Andy. Nice job on that scooter. I'm running a sabvoton 72100 on a mid drive and the motor keeps ticking, sometimes a bit violently. Any idea what's wrong with it?
That sounds like it couild be the Bering are worn out so it can vibrate and Tik/ rub ore it couild be a simple little pease of mettle ore something stuck to the magnet on the motter
@@dillonseeney3149 Thanks for the suggestion, but I know it's not mechanical because I hooked the motor up to the old controller to check and it runs really smooth on that one.
@@colinriches1519 it could be the current limiter if you are in too high a gear. My bafang motor will do that if you try and launch in the wrong gear, but I rarely hear it because I am quite good with my gear selection. There is also another low battery warning that will cause the controller to send a vibration signal through the motor which you can feel. I wonder how many people buy a Bafang BBS02B, mash it along like a noob by pinning the throttle at 50 rpm and then complain it gets too hot.
@@TimpBizkit Thank you. I should have said it's not a geared motor. Drive sprocket is 11t and rear is 56t. The motor is rated at 72v 3kw and spins at 6000 rpm, but I want to run it at 100 amps if the motor wires can handle the current. Operating at 40 amps (10amps lower than the previous set up) it still does it, so I don't think it's that. I've recently heard that the controller I bought is only meant for hub motors that spin no more than 1000 rpm, being a newbie I'm not sure if that's why. I've got so much to learn.
i have this bogist c1 pro scooter but i cannot mount the seat back. two scew holes are empy and the other 2 are with a metal which is blocking the scew. how can i fix this? i want to mount the seat
Hi mate I have a kugoo g booster I want to upgrade the controller but I have no idea where to start are you able to recommend a controller that would work please
Good stuff Andy! one quick question: i just got the Bogist C1 but I´ve noticed the battery might be getting some damage because of rough terrain, any suggestions on how to fix it in position?
I've noticed that aswell ,didn't help with the pothole I hit that also took my kick stand clean off ,but is rips gets you where you need ,I'd just not ride out in wet weather
I'm curious if anybody might have an idea how hard it would be to mod what I am assuming is a cheap Chinese scooter? I bought what looked like a "gently used" Phaewoo that the original pamphlet claimed a range of 12 to 18 miles (somewhere in there), but I road about 2 miles to and from work one day and it was almost completely dead from a full charge. So I'm assuming at the very least it has a shot battery. Said scooter also seems to top out at like 5mph in slow setting and probably around 8mph in high setting. I'd like to bump that up as well. It is a hubdrive motor in an 8 or 9 inch wheel. Don't remember the supposed watts it claims, but I'd like to be able to go 10-12mph for a leisurely pace, maybe up to 20 ish for VERY short bursts just for fun factor, as well as being able to take some decent hills.
is it confusing to program it? i dont even know hat that means really but i fucke3d my bogist m5pro yesterday and its giving me an e3 error and i think it means the controller is nakerd. i dont want to just put it back in the box and forget about itand im glad iv seen this video but i dont really want to attempt it if its too complicated for a novice.
Haha, these hubs are pretty resilient as long as you don't do extended runs uphill at full throttle it should be fine. I've never burnt a motor believe it or not!😅
Dark blue. On some it's bright blue. Regardless, if you have a blue wire.. that's probably it. Recommend you put an on off switch and run with it on normally and use switch as temp turbo.
I got apollo ghost and won't 2 have a 72 volt battery put in not for speed two go further distances and longer rides is fine all so the charger port is 3 pin and like micro phone plug is there a better suggestion for better charger ports and a 72 volt battery that would fit
@@andykirby I own a Pogest scooter. If I want to add a motor in the front, what will I need? Knowing that I have a 48-volt 30-amp battery, can I connect them to the handle of one extra bed? Thank you
I've got a spare punctured ninebot max in my garage I've been considering doing some crazy upgrades to it as a bodge job project vehicle is it possible to do anything with it do you know? Hesitant as it runs via firmware but wouldn't be to bothered if it burnt out
Great video. I am trying to do the same for an Brose e mountain bike. Looking to get more power/torque out of the motor not just more speed. Do you have a video covering this? Or a direction to point me?
Biggest challenge is figuring out the sensor wiring. Some motors like the bafang m620 don't even have conventional hall sensors so you have to run in sensorless mode look online to try and find others who have taken apart the motor in question so you can prep before you rip it apart!
Bro reply and I can point you in the direction of the only video I've come across of an electrical engineer taking apart a batangas motor and frankinsteining a 500 to get a 750 motor but he got stung so had to rip the motor apart then he just goes way in deep to the point I was lost im not good with electrics .lol give me an engine ill take it apart and put it bck together no problem ,simple wiring problems ok ,but not got a clue with all the talk n walk stuff .
@@Crosshatch1212 thanks! I was thinking that there would be a huge opportunity for someone to figure out how to generate more power from a Brose or other mass market ebike. Not just speed restrictors. Seems like people do it for Banfang motors all the time. Any engineers out there want a challenge I will fund it.
Has anyone figured out the way to change it from km/h to mph? It has the option on the screen… also has the cruise control but I don’t know how to activate it.
How are you mate Iv got a chaos 48v 1000w lead battery I wanna upgrade it so it's alot faster and for me to get more miles I'm a big lad I'm like 17stone So want something with plenty of power Can you recommend any upgrades please
What s the best way to make my kugoo g booster faster the motors are set at 800w per motor so total of 1600w but the motors they say are peak 1200 each wheel so 2400w will more watts make it faster ?
I'm not familiar with your scooter, but upping voltage and/ or amperage will result in greater output wattage. More watts, generally results in more power and speed. But you need to take many factors into account. Such as: 1. Can you battery supply the increased output SAFELY? Li-on and Li-po need to be treat with respect. They can explode causing fire and serious injury. 2. what is your motor rated & will it overheat? Usually you can put double rated wattage through them for SHORT BURSTS only. 3. Will your controller be able to handle it & what voltage are the internal mosfets rated at? 4. Will your wiring and connectors be up to the task of handling the increased current? Many things to consider. Hope this helps you.
@@18ct thanks its the kugoo g booster it says on internet there 1200w each motor as there’s 2 but there only 800w running to them from the controller I thought maybe a new controller that will run two motors and add maybe a remote control car battery that’s lipo 9v I think they are
Andy or anybody I got a hub motor with two leads coming out the hub. One side has phase and hall wires and the other side just has phase. It's a 12" 60v/2000w motor I'm just wondering do I need two controllers or both phase wires connected together then to the controller. But when I connect both together it runs like s**t. Any idea's would be helpfull because I'm tried of just going 55 kms I need more.
I would only hook it up with which type of controller you have, if you're controller accepts the hall wires as well just run that side and don't worry about the extra phase wires on the other side. If you're looking for a higher top speed a higher voltage battery will help as long as the controller can handle it, you have to have a battery and controller that can supply enough amps to push it to the higher speeds you want.
@@Baldys_projects Thanks that's what I thought don't hook up the extra phase wires. But I gave up and thought it was the controller I have a Yuyang King Controller. And the controller would not calibrate for some odd reason.
@@andykirby HI , NOT REALLY RELATED TO THIS VIDEO BUT, I HAVE A FC-1 STEALTH BOMBER 72V 8000W AND I HAVE PUT THE CHARGING LEAD IN THE CHARGING PORT THE WRONG WAY! THERE WAS A SLIGHT FLASH & TINY POP! THE BIKE STILL WORKS FINE SO DOES THE CHARGER BUT THE GREEN LIGHT ON THE CHARGER STAYS ON HENCE NO CHARGING! I'VE CHECKED FUSE ON CHARGER & LOOKS OK, WAS WONDERING IF THERE WAS A INLINE FUSE FROM THE CHARGING PORT TO THE BATTERY? ANY IDEA PLEASE ANDY 🙏
Fantastic work, these are the skills a country needs to innovate and advance, unfortunately £300 fine and 6 penalty points on current of future licence is too big a price to pay courtesy of the overzealous taliban tactics traffic police, our poor kids in this country are the ones missing out and paying the price and yet we expect them to compete with the rest of the world !
Should be legal beginning of December Police told me, because scooter trials,end Nov 30th If they don't legalise them, All trial scooters will have to be taken off the road, Rental scooters are going to be permanent
@@niteblaster1 so many people are using escooters. No one, not even the police, care. However, it may be different in London, I believe you can’t even take them into trains their.
İ would like to ask about the controllers, i’m going to change the controllers, i’m using 48V 21Ah 800WX2 scooter, i’m going to buy 2 controller and throttle set, but the 1000W controllers don’t fit in my scooter body, and the controllers which were in my scooter are really small and i don’t even believe that they are 800W they are really small, so don’t know what to buy🤷♂️
This was exactly what I was looking for. Thanks for this! 😀
Crossed my mind, these scooters are getting a bad rep. Yet I saw a man in his 80's in the middle of the road on a mobility scooter and nobody bothered him. I need a mobility scooter. Four wheels. Comfy seat. Sabvoton or phaserunner strapped to it. A dragster style wheelie-bar and parachute on the back.
🤣🤣 there's some really cool modern low profile mobility scooters around at the moment just ripe for modding, I might have to do one as a project.
Dude I’m 47 and the can be fun to ride
Ah you make the wiring look much easier haha.
I did a little wiring repair on my kugoo kirin m4 pro 500watt. The motor wires were shorting out, acting as a phased brake with the scooter on or off. So. I ripped out the LED side lights because that shorted out from the snow last year. Then heat shrinked the motor connectors where it was shorting out. Put it all back together. And now my tail lights are not working. Brake lights work. It's a wire mess cramped in a tiny little space. I don't know what wire is what haha. I just left it and use a rechargeable bicycle tail light accessory.
U think thats cramped, wait til u try adding more wires such as indicators and a high beam front light 🤣 best thing i can suggest, is disconnect battery, then rewire using labels on the wires, where the wires aren't using connectors add ur own (or solder n shrinkwrap). If not sure what the wires do, just follow them to see where they go. Only attempt if you are somewhat ok with rewiring.
I have the same scooter. I found on the bogist website they have a 48v 20amp battery upgrade for sale.there wasnt much info onnit soni was wonderingnif i buy it ia there anything else i need and would it improve my speed/ acceleration performance and distance?
Allso where can i purchase the new phase controler box you bought, and sorry one more thing how do i remove the speed limiter,
Great work Andy 👌 , I got both my boys the G Booster scooter I was on it as dads do had to have a wee shot I came off k.o concussion for a week ( I have been off work for 4 weeks so far still not right ( landed 10half stone onto the head ) please take care on them bud , my sons now have a full motorbike helmets on 🤦♂️
G boosters are dangerous pal known for it
Nice job. I might do this to one of my scooters when it dies
Interesting what you can do with these scooters. The motors can take quite a bit more than what they are rated at especially for a short distance. Great job.
Thanks David, yeah these hub motors always surprise me! If all you care about is short bursts they can handle loads more.
very intersting. Would you maybe consider doing a beginner tutorial how an e-scooter works and how to know when a batteri is powerful or not ? I'm a beginner and really want to learn this stuff.
Just stick to name branded things. Never get anything you haven't done research on.
I got the ninebot g2 and I'm happy with it. Hopefully mymax mods will do what they did with the first one where we can upgrade that model
Agreed, I have a small chassis scooter and I would love to swap out the controller like this and add a bigger or external battery pack.
2:25 the hull sensors? IS there a way to replace the plastic on it to pull it out and do it yourself? what is this plastic called?
Andy what would you do with a 52v dual 1000w for more power? What controllers should I be looking at ? Regards
Kool, I have to replace some wires on mine too. I just need to remember whats what lol. Wish me luck on my repairs.
You grow up yet?
Could you explain please, how to unmount rear wheel without breaking the wire? Where is rear wheel wire put?
Do you think one of these could run dual motors? Rather than having two controllers, it might be nice to just have one of these.
Is the little blue wire the speed limiter? I heard that you should cut the little blue wire to remove the limitation
I’m looking to upgrade this scooter possibly adding a bigger battery. Do you think it would be possible to add a second motor on the front and connect a second controller inside to operate the front motor. How large of a battery can I fit?
So whats the new max speed of that scoot
Evercross H5 vid would be nice!
I second this. Please show us how to make more speed and torque on the evercross h5. They advertise 800w but the owners manual says 500w. It would be great to actually get the full 800w of power that it can handle
Great tear down!!! 👍👍👍 And build back up. I’ve just got the Emanba L-12 Pro as my first e-scooter and wondering if anyone has below info please???
Hey friends.
I hope you are well!!! 🙏🙏🙏
Does anyone have the manual for the TF-191 NFC controller??? Finding it hard to find details as it seems new out??? Found generic manual for similar controller but the numbers don’t add up. Any tips for setting up the scooter first time regarding bolts and screws??? Should I use locktite on bolts u know i wont need access too??? Blue locktite so it can be undone with manual tools with a bit of force.
Keep at the great reviews!!! 😃😃😃💪💪💪
Best regards,
Scott. ✌️🙏✌️
I want to know how to make the wheel start rolling as soon as I press the throttle instead of having to get the scooter rolling before the motor will engage.
Can that be disengaged? If so, how?
Hi Andy. Can you help... I have a Thorpe 30 e scooter. How do I pass the speed controller to get more speed. There are 3 thick wires green red and blue. And 5 thinner wires. Red black blue green and yellow
Hi, thanx for the nice video but it would also be nice if U can also put parts list, thank you
I have an Evercross H9 scooter with the new dash, 48 volt 800 watt motor 14aH battery and stock controller. and i realized they lie and say 28 mph.. by GPS is does 25 mph at best and i wanted to know if i can use maybe a 1000 watt or 1200 watt controller to give it some more speed..
What they like these scooters? Seem decent for the price, what’s minimum power I’d need for grass and slight hills? 800w?
800w will do it but if you want to have more fun you will want 1500w minimum
@@rwosu cheers, any recommendations? I’m in uk
Battery or motor blow and fry first ?
Hello I was wondering how I would be able to get in touch with as u have niu that I want to upgrade the controller
What software do you use? Great video btw!💯 love from Sweden 🇸🇪
I have an 800 watt Evercross H9 scooter with the 14.4aH battery, can I put in a 1000 watt controller to get the 200 watts more? Maybe just like 5 mph more without blowing the motor ??? And will it work with my display on the H9 instead of that circular Chinese style? Or will I need to replace it all?
so what battery did u pit in it? :p
Could you tell which wire i Need to cut? 😘 i have e-kick city from 'biltema '
Yes Andy I have been waighting for this for a while watching it as I'm typing that hyped up abowt it
What is the controller you are using and Warehouse can I get it as the site link you have in description is broken or not working
Good day, Andy my friend you need to get a hold of these:
Anti Spark Connector Male/Female XT90-S (Upgrading version of XT90)
Working current capacity: 90A
Peak current capacity: 120A
Banana connector diameter: 4.5mm
not just about anti spark LOL voltage etc has to match or it fry everything. kind same when you. link up battery's together. to make a bigger one all has be same numbers
Wondered could you help me and let me know where I can get a motor control unit for a vsett 8 electric scooter as I believe my one has blown
Could do with help on my scooter.
Do I have to have a lcd screen. Can I not just hock the throttle and brake up to the controller or them 5 wires coming off it to make my scooter work.
Or do I have to run it though a on&off lcd or obo 1st . Help
I own a bogist c1 pro and wondered if it was possible to upgrade the battery/motor/controller if so do you have any advice on what battery I could use and what parts I would need to complete the upgrade as I'm a little unsure on everything I would need. Thanks
Hello, Andy! I have a mototech 48v 2000w scooter I wanna put one of those phaserunners on but I can't find one. Can you give me a link to buy one?
Do you know if a eway-3045 e-scooter will be able to be tuned from 20km/h to 25km/t without hurting/destroying the battery?
Well done, if you have a 500w motor, this means the stock battery is 36v, what about the new bulky one?!! What is its voltage rating along with its 25 amps?!! How much did you pay for it?!! Can the new controller handle its power?!! What are the new controller specs?!!
Was gonna change my controller but was scared on heating issues on the motor
Just make sure the scooter is up to speed before you apply power rather than launching it off the line and the motor should take it.
That's risky but what the hell.... Why not if it was already blown up. LoL
Great job..... 😁
i have the same re-badge scooter and thinking of a way to replace the controller. i hate the fact it has a built in cruise control i want removed. but doing so would make the lcd on the stem useless. is there any chance you still have this busted controller id love to peek inside it
Will this work on a e202 scooter 500 watt motor looks like the scooter u got
HI Andy. Nice job on that scooter. I'm running a sabvoton 72100 on a mid drive and the motor keeps ticking, sometimes a bit violently. Any idea what's wrong with it?
That sounds like it couild be the Bering are worn out so it can vibrate and Tik/ rub ore it couild be a simple little pease of mettle ore something stuck to the magnet on the motter
@@dillonseeney3149 Thanks for the suggestion, but I know it's not mechanical because I hooked the motor up to the old controller to check and it runs really smooth on that one.
@@colinriches1519 it could be the current limiter if you are in too high a gear. My bafang motor will do that if you try and launch in the wrong gear, but I rarely hear it because I am quite good with my gear selection. There is also another low battery warning that will cause the controller to send a vibration signal through the motor which you can feel. I wonder how many people buy a Bafang BBS02B, mash it along like a noob by pinning the throttle at 50 rpm and then complain it gets too hot.
@@TimpBizkit Thank you. I should have said it's not a geared motor. Drive sprocket is 11t and rear is 56t. The motor is rated at 72v 3kw and spins at 6000 rpm, but I want to run it at 100 amps if the motor wires can handle the current. Operating at 40 amps (10amps lower than the previous set up) it still does it, so I don't think it's that. I've recently heard that the controller I bought is only meant for hub motors that spin no more than 1000 rpm, being a newbie I'm not sure if that's why. I've got so much to learn.
i have this bogist c1 pro scooter but i cannot mount the seat back. two scew holes are empy and the other 2 are with a metal which is blocking the scew. how can i fix this? i want to mount the seat
Hello Andy! Which parts are used for all of this?
Great stuff Andy 👍👍
Hi Andy any idea how to derestrict the pure 2nd generation scooter
Wicked tune, I love me some DNB 😎
Hi what controller you are using in this e-scouter? Can you post a link?
Hi mate I have a kugoo g booster I want to upgrade the controller but I have no idea where to start are you able to recommend a controller that would work please
Do you you know if a 4amp charger would halve the charging time?
If you normal charger is 2 amps yeah
Good stuff Andy! one quick question: i just got the Bogist C1 but I´ve noticed the battery might be getting some damage because of rough terrain, any suggestions on how to fix it in position?
I've noticed that aswell ,didn't help with the pothole I hit that also took my kick stand clean off ,but is rips gets you where you need ,I'd just not ride out in wet weather
Any upgrade ideas for a blaze 600w scooter?
lovely video's man ! , should a 4amp charger charge the std battery twice as fast you think?
I'm curious if anybody might have an idea how hard it would be to mod what I am assuming is a cheap Chinese scooter? I bought what looked like a "gently used" Phaewoo that the original pamphlet claimed a range of 12 to 18 miles (somewhere in there), but I road about 2 miles to and from work one day and it was almost completely dead from a full charge. So I'm assuming at the very least it has a shot battery.
Said scooter also seems to top out at like 5mph in slow setting and probably around 8mph in high setting. I'd like to bump that up as well. It is a hubdrive motor in an 8 or 9 inch wheel. Don't remember the supposed watts it claims, but I'd like to be able to go 10-12mph for a leisurely pace, maybe up to 20 ish for VERY short bursts just for fun factor, as well as being able to take some decent hills.
Am finding them easy to mod, as long as ur pretty competent with electric wiring. With generic scoots, parts seem to be easily sourced too.
Do you have the direct link to the controller I'm running a h6 model scooter
i need a linke to the the controller link doesn't work anymore can you give me a link to the buy I controller that's 52 volts programmable
Have the device reached 120 km/hr yet?
How do I upgrade my 60v 30amp tifgalop scooter to a 72 v 40amp?
It was probably center negative always check, as for battery compartment just 3d print a 10mm extenter and buy another. Seal
We're from the same area I hope to see you wizzing round on that thing 😂
Awesome video and thank you for sharing your tips 👍👍💚
is it confusing to program it? i dont even know hat that means really but i fucke3d my bogist m5pro yesterday and its giving me an e3 error and i think it means the controller is nakerd. i dont want to just put it back in the box and forget about itand im glad iv seen this video but i dont really want to attempt it if its too complicated for a novice.
Hi Andy would a phase runner work on a 48V 18.5Ah battery and single 800w motor would it run ok aswell thanks for ur time keep up the amazing work
Hiya. Are you able to derestrict the PURE AIR PRO LR ?? Many thanks.
Looks like a lot of fun, it'll be interesting to see how long it lasts with your throttle action! ;-)
Haha, these hubs are pretty resilient as long as you don't do extended runs uphill at full throttle it should be fine. I've never burnt a motor believe it or not!😅
just 3d print a mill trim unber the scooter make in deeper battery will fit
Whats the software u was using?
Any there is a way to stop the sparks use a resistor to charge the caps first.
What wire you need to cut to have no limit speed? Ive a vMax R25. Thanks!
Dark blue. On some it's bright blue. Regardless, if you have a blue wire.. that's probably it. Recommend you put an on off switch and run with it on normally and use switch as temp turbo.
I got apollo ghost and won't 2 have a 72 volt battery put in not for speed two go further distances and longer rides is fine all so the charger port is 3 pin and like micro phone plug is there a better suggestion for better charger ports and a 72 volt battery that would fit
Great vid sir
Hello, and thank you for the explanation. I have a question, please, can I connect two motors to an electric scooter on one microcontroller? Thank you
No is the simple answer, for AC motors and contollers you need one per motor.
@@andykirby I own a Pogest scooter. If I want to add a motor in the front, what will I need? Knowing that I have a 48-volt 30-amp battery, can I connect them to the handle of one extra bed? Thank you
Very nice thanks mate.
Your welcome mate 👍🏻
How can you loosen the front shock absorber?
I've got a spare punctured ninebot max in my garage I've been considering doing some crazy upgrades to it as a bodge job project vehicle is it possible to do anything with it do you know? Hesitant as it runs via firmware but wouldn't be to bothered if it burnt out
id say get a solid honecomb wheel (even better if you can get some suspension forks if it doesnt have suspension)
I just learned what cockney speak means or is yesterday, so when i heard u say its got some beans i definitely had a lil cheese 😉✌️
Great video. I am trying to do the same for an Brose e mountain bike. Looking to get more power/torque out of the motor not just more speed. Do you have a video covering this? Or a direction to point me?
Biggest challenge is figuring out the sensor wiring. Some motors like the bafang m620 don't even have conventional hall sensors so you have to run in sensorless mode look online to try and find others who have taken apart the motor in question so you can prep before you rip it apart!
Bro reply and I can point you in the direction of the only video I've come across of an electrical engineer taking apart a batangas motor and frankinsteining a 500 to get a 750 motor but he got stung so had to rip the motor apart then he just goes way in deep to the point I was lost im not good with electrics .lol give me an engine ill take it apart and put it bck together no problem ,simple wiring problems ok ,but not got a clue with all the talk n walk stuff .
@@Crosshatch1212 thanks! I was thinking that there would be a huge opportunity for someone to figure out how to generate more power from a Brose or other mass market ebike. Not just speed restrictors. Seems like people do it for Banfang motors all the time. Any engineers out there want a challenge I will fund it.
@@bryan3094 ruclips.net/video/-Iu9AbFiLl8/видео.html hope you get this bro ,good luck ,
How do u connect your laptop to the controlla as need to adjust mine
Is this possible on kukirin g2 max? 1000w motor
Hi andy. lovin ur vids.
i have a duel 1000 w motor scooter. can the phaserunner handle the pair.?
many thanks in advance.
ROGER.
Hi Roger, you'd need two phaserunners unfortunately.
@@andykirby Hi Andy, any idea where I can buy a phase runner controller please? Cheers
by eck she was shifting, that looks a lot of fun now
HI great video, just wondering has anybody gotten spare parts for this scooter , my display is faulty and i having a hard time finding one. Thanks
There will be a discord chat room for that brother
Hi there mate got a e scooter how much would it cost for me 2 send my scooter two you for a upgrade
Awesome man 😁👍
Has anyone figured out the way to change it from km/h to mph? It has the option on the screen… also has the cruise control but I don’t know how to activate it.
how much did you get it up to?
Where can I learn build fiido from scratch?
How are you mate
Iv got a chaos 48v 1000w lead battery
I wanna upgrade it so it's alot faster and for me to get more miles
I'm a big lad I'm like 17stone
So want something with plenty of power
Can you recommend any upgrades please
Do you recommend any upgrades I’ve got same scooter
What s the best way to make my kugoo g booster faster the motors are set at 800w per motor so total of 1600w but the motors they say are peak 1200 each wheel so 2400w will more watts make it faster ?
Won't go faster except you up the voltage since there is no gearing to change since you're using hubmotors
I'm not familiar with your scooter, but upping voltage and/ or amperage will result in greater output wattage.
More watts, generally results in more power and speed. But you need to take many factors into account. Such as: 1. Can you battery supply the increased output SAFELY? Li-on and Li-po need to be treat with respect. They can explode causing fire and serious injury. 2. what is your motor rated & will it overheat? Usually you can put double rated wattage through them for SHORT BURSTS only. 3. Will your controller be able to handle it & what voltage are the internal mosfets rated at? 4. Will your wiring and connectors be up to the task of handling the increased current?
Many things to consider. Hope this helps you.
@@18ct thanks its the kugoo g booster it says on internet there 1200w each motor as there’s 2 but there only 800w running to them from the controller I thought maybe a new controller that will run two motors and add maybe a remote control car battery that’s lipo 9v I think they are
Andy or anybody I got a hub motor with two leads coming out the hub. One side has phase and hall wires and the other side just has phase. It's a 12" 60v/2000w motor I'm just wondering do I need two controllers or both phase wires connected together then to the controller. But when I connect both together it runs like s**t. Any idea's would be helpfull because I'm tried of just going 55 kms I need more.
I would only hook it up with which type of controller you have, if you're controller accepts the hall wires as well just run that side and don't worry about the extra phase wires on the other side.
If you're looking for a higher top speed a higher voltage battery will help as long as the controller can handle it, you have to have a battery and controller that can supply enough amps to push it to the higher speeds you want.
@@Baldys_projects Thanks that's what I thought don't hook up the extra phase wires. But I gave up and thought it was the controller I have a Yuyang King Controller. And the controller would not calibrate for some odd reason.
Hi there great video what was the name of the controller
Phaserunner www.cloudsto.com/forum/phaserunner-motor-controllers/phaserunner-advanced-foc-controller-90v-2000-3000w-detail.html
@@andykirby HI , NOT REALLY RELATED TO THIS VIDEO BUT, I HAVE A FC-1 STEALTH BOMBER 72V 8000W AND I HAVE PUT THE CHARGING LEAD IN THE CHARGING PORT THE WRONG WAY! THERE WAS A SLIGHT FLASH & TINY POP! THE BIKE STILL WORKS FINE SO DOES THE CHARGER BUT THE GREEN LIGHT ON THE CHARGER STAYS ON HENCE NO CHARGING! I'VE CHECKED FUSE ON CHARGER & LOOKS OK, WAS WONDERING IF THERE WAS A INLINE FUSE FROM THE CHARGING PORT TO THE BATTERY? ANY IDEA PLEASE ANDY 🙏
Video broken. Won’t load. Did u piss off the algo
Fantastic work, these are the skills a country needs to innovate and advance, unfortunately £300 fine and 6 penalty points on current of future licence is too big a price to pay courtesy of the overzealous taliban tactics traffic police, our poor kids in this country are the ones missing out and paying the price and yet we expect them to compete with the rest of the world !
Should be legal beginning of December
Police told me, because scooter trials,end Nov 30th
If they don't legalise them,
All trial scooters will have to be taken off the road,
Rental scooters are going to be permanent
@@niteblaster1 so many people are using escooters. No one, not even the police, care. However, it may be different in London, I believe you can’t even take them into trains their.
@@therealworldco they do care I get chased every time I see them
Literally we need more educated people
Great vid andy...modding for more power is why I subbed years ago :)
Hows the china importing going?
Thanks! We import less these days amd supply direct from China.
İ would like to ask about the controllers, i’m going to change the controllers, i’m using 48V 21Ah 800WX2 scooter, i’m going to buy 2 controller and throttle set, but the 1000W controllers don’t fit in my scooter body, and the controllers which were in my scooter are really small and i don’t even believe that they are 800W they are really small, so don’t know what to buy🤷♂️
where can i get me a seat like yours?
Hello
I have a question please, I have an electric scooter and it's slow can you help me speed it up?
Hallo from Germany
Great Video
Mfg
TK
Dope! 🤙