Electric scooter speed controller mod hack step by step guide to modifying your speed controller
HTML-код
- Опубликовано: 20 июл 2019
- Electric scooter speed controller mods to increase speed and torque for all electric scooters like razor e scooter and electric bikes.
In this video I will show you step by step instructions to get the most out of your speed controller for almost free.
get a good speed controller here
amzn.to/3p9RkHt
affiliate link
Subscribe to see how it works out on 36v as next we fit it into the razor electric scooter and get some lipo batteries hopefully we will hit 30mph
#razorscooter
#razorelectricscooter
#speedcontrollermods 
Развлечения
![Megan Thee Stallion - Otaku Hot Girl [Official Audio]](http://i.ytimg.com/vi/USxIYOaIpig/mqdefault.jpg)
Exellent information! Yesterday I beefed up my Lifan E3 controller following your instructions. The result is much better acceleration. Bye bye warranty ;)
This was class man class.✌️
But your soldering skills are painful to see .
You should have checked the resistance of the shunt before you modified it. For one it gives you a control unit and you can revert it back if needed.
The mosfit will just go & will go wide open but u no that probably or found it out. But your soldering skills are amazing bro hat off to u sir
current will only help touque, voltage will help speed, ie add another 12v battery ie:24v to 36v. then u kinda run into burning up the controller, so best bet is to buy a 36v controller and add another battery.keeping the same motor (24v).
Great tutorial. Could someone tell me where the controller is coming from ? is it the small box on the wheel or its the actual controller in the body of the scooter near the battery ?
The speed controller is in the Scooter body you mostlikely know by now though🤣
Will this method work for a 60v scooter?
has anyone noticed how all these fools show this "awesome hack" but never show a voltage/current output or even simply a test of them riding it before and after... This does nothing
Modding the shunts by adding more soldier to it definitely works. I did it. But only put a small amount of soldier like a blob but I’m gonna add some more I think 🤔
Thick head bypassing the shit definitely works
@@troop8829 10% at a time. Too much will blow the controller. Also why does noone mention draining the caps? And yes it does add speed by adding amps. Sometimes its quiet a bit sometimes its not. More modern controllers with lcd displays can be adjusted with the throttle i just did this on my titan pro it runs a tf 200 lcd throttle not sure if it will make a difference yet. Il let u know. I also beefed up all the solder. Not something i suggest if hour not good at soldering. This can very easily fry your controller. Especially adding as much as this guy. Dont do that. Another thing with upping the voltage is you need higher voltage capacitors those are usually right on the threshold
I like your style is there any danger that disken damage the motor and approximately how much extra speed do you think you can get
Hi, I really appreciated the info and video, great visual aid and explanation. Do all controller modules look similar, I have a rhino 160A controller on my mobility scooter, can I expect similar circuitry when I open that up? Also, I noted a few comments below, do you still feel your mods are safe. Many thanks
No
This man is not to be trusted.
i would not go with tips from this guy in the video no his mods is not safe. all u can do is program controller to get more speed or if it dont have speed limit up the voltage and u will get more speed tho u should look up what all components on ur controller can handle and always go with a little bit less dont push the maximum limit if u want it to holdup..
Ive got a rascal vortex 2023 8mph scooter can i make it faster ie remove sny speed limiter on it??very grateful for help or advice budd
I have an inokima e scooter (light) .. does it work for me ?
I added a battery to a swagger5. I pulled apart the speed controller after watching this video and my controller looks a lot more technical. It even has a computer chip in it. No mosfets. It would be nice to be able to get more speed. I’ve got the amp/hrs to handle. Many times while riding the scooter it will max the speed then I feel it back down and then I go 1 to 2 mph slower. The cruise control helps as if I can get it maxed long enough it will hold that speed. Manual without cruise usually encourages the artificial speed reduction. Anyway I’d like to do like I saw on this vid. Maybe I need a bigger controller. I’m afraid of the wiring of a new controller as I’m sure colors don’t all line up.
300w 36v. Batteries 2 - 12a/h . 24a/h total. Max speed right now 16mph at best.
Thank you. I appreciate videos like this!
sounds like you need a new speed controller to get a bit more speed out of it if it's even possible to swap the speed controller out. sounds like a complex bit of kit. this how to is just for cheap Chinese scooters.
sorry I can't help with yours.
Check out the VESC to replace your existing ESC (about $100)
No mosfetts? I think your looking at a stepdown transformer. That regulates the voltage down to 12v for the lights
I have a 24v mobility scooter and am looking to bypass the speed controller. What do you suggest. The circuit board is a ‘dynamic controls DR50’
I'm not sure on that scooter but the ones I've worked on the motor and 24v from the batteries is normally what gives you the top speed and the controller is just feeding the power in slowly and switching it for reverse and doing other bits like the lights.
the gearing or increasing the voltage to spin everything faster is the way to go faster and a higher wattage controller for acceleration.
I'm going to get hold off another mobility scooter and try a load of bits out on it to see what works and what doesn't for speed and acceleration.
Very helpful video. Thanks #MAD MODS
@MAD MODS Is there a way to hard wire or delete the ESC on 24v system for very short,fast runs? I'm not confident on hacking into the electrical🤔, thank you sir.
Hi! Is this possible on a Hurricane e-scooter model W04-2001?
can i buy one that,s all ready modified ?
Hi ,,can I do that my nanrobot d4+,with out
mesinger it up.?
Great video. Can I make this with 48v?
Yes
Can you take out governor speed from a yume 10 escooter?
Will this work for Mercane?
Hi there I just got. A.pure electric pro do you know if I will be able to alter the speed on it plz help thanks
I have the same scooter, did u find out?
Would this work on the EWheels EW11 Euro Scooter? Where is it located at on the scooter? Thanks !! :)
can I solder a smaller rod to decrease the speed?
Hello..I have a yk20d yiyun 24v 23 A controller with two identical mosfets and also a relay. Can you help me?
So if a top speed for example is 30K's. You'll now get 40K's or so?
What is the model is this scooter?
And how can I connect the controller?
Will this work on an Currie eZip 750?
Nice can ya do this on a urban30 carbine scooter ?
will this work on the vga x7?
work on etwow master plus with 24v battery?
I don't have one of these in a rascal pioneer how can I do it?
will this work on PURE AIR PRO LR ?
does this work on tga breeze s4
Does this work on gotrax g4?
Looking at the two capacitors on the board, I could only make out that they were rated for 50v but wanted to know how many uf they were. My 24v controller came with 63v 430uf caps. I was wondering if swapping them out for 1000-1500uf caps would be of any benefit or even harmful???
not much point there just to smooth out the switching of the mosfets and buffer the voltage. thay do nothing for the speed of the scooter
how do you know what mosfett to use ?
Hey can you give me some advise I have a XT2 scooter I need a new battery but unable to find what I need so am I able to increase the speed and use a diffrent one?
It depends on the voltage of your scooter at the moment.
Yes upping the voltage will make it go faster but to much voltage and things will get hot and burn out.
@@MADMODS my motor says on it MY6812
120W 12V I reli only want it to go about 20MPH I think it does 10 to 15 at the moment
@@MADMODS mine is the ZINC Volt XT2 Scooter
I wish I had learned this kind of stuff instead of medicine! 😫
At least this kinda stuff helps people medicine keeps people sick to make money
I can assure you not, I’ve studied electronic engineering and would rather be a medic
How i can remove speed limit from nicrox 800w
any idea how to hack the pure air 2?
I have a Reid e4 plus, will this work with it?
thats why am here now got mine today to look 4 better battery and speed to 25mph from 15mph and the throttle is weak had to fix and only just got
please help me i want to increase speed of my mobot mini 4 scooter it possible can i do that same procedure like you do?
More voltage =more speed and gearing is Also needed. This mod is for faster acceleration and torque and to allow more voltage to be used to get a higher top speed.
MAD MODS so i can do that also in my mobot mini 4 scooter?
Hi, I positioned the wire on the esc as you did but it made a few sparks shoot out, did i accidentally bridge the wrong pins or was there some charge left in there that i released
I put it all back together without modding and it still works
maybe your capacitors left charge
@@pomocnyinaczej4221 will it be safe to still mod it then?
@@OverhaulTech mostly capacitors can survive a lot charge off, be aware to not connect both legs of capa. Again
@@OverhaulTech just bye a new controller that will work for 24/36/48v and look out for the amp on the controller.
Most 24v or 36v will be in the £12 price but if u look it will say 36v 350w 13amp or 14amp.
If u pay a bit more or look about u find one the same specific but the amp will be 17/19amp that’s what u need . Don’t worry about over V the moter they can take a lot .
I had a 350w on 72v no problem.
But just get a good controller.
Plus if your going to be playing around like I do with different scooter or projects then get a sine wave or a good one that u can even use a laptop to put what amps and so on. But they r well worth it. Mines got 24 mosfits and can run 24v up to 72v I think even 80v plus up to 65amps
Is it OK too run a 1000w controller on a 500w battery?? Any ideas please. Thanks.
Batterys dont work in Watts do you mean the current speed controller is 500 watts and you want to use a 1000watts one. Yea a battery is calculated in amps and volts so you need to do the calculation on how many amps the 1000w controller will uses to determine how long the battery will last I'm guessing half the range it dose on 500watts. What batteries are you currently using?
@@MADMODS I've done a mobility scooter conversion with a 36v 16Ah battery with smart bms. I'm not 100% sure on what the cells are exactly if I'm honest but yes, I wanna change the 500w controller too 1000w controller. I was just curious if it would be OK to do that.
@@c.jack3314 yes I'm not sure how the motor will take the extra power. The battery is most likely lithium ion if it's not lead acid the battery maximum output is 16ah meaning 16amps a hour until flat so the range will be a lot less but unlikely to be on full throttle all the time tho. Its hard to say how the motor will take it but the batterys should be fine.
@@MADMODS there's a 29.5Ah rated motor that on there. Only one way to find out 💨 Thanks for the replies muchly appreciated
@@c.jack3314 no worries check out my other videos iv got a bit more on electric scooter and mobility scooters and am planning a crazy mobility scooter build for this year.
Along with some scooter bits.
Can i use this for my Dualtron Storm? If so how can i purchase it? Storm is so powerful, always wheelie, definitely need this
Pretty sure it's mainly for those 250w-750w e scooters that the max speed is 15 mph - 25 mph due to rules and regulations. If you're e scooter can go over, I doubt there's a speed limiter on it
Any idea about yadea ks5 pro?
Quality
can this be done on Aovopro
I'm looking for a speed hack for a Shenzhen 36v mega wheels S10 scooter. 2021model
Can you do everyone 350w scooter?
I want to increase speed on a Macwheel mx Pro, please help??
It is a pity that this does not work with BLDC motors, because there are already three motor cables there. You need to install a tuning box there ...
just increase battery voltage to get higher max speed - most controlers can take 1-2 extra series without mods, but need to inspect before doing.
did you do the second part yet fella
No been on holiday, stripped down the other scooter for all its parts to swap over I uploaded that video. I have to make up a lipo battery pack before I swap everything into the razor that will all be coming out soon 😀
@@MADMODS ok fella look forward to it
I’m in Kent anyone able to mod my scooter make it faster or do this to it please I can pick up drop off and can pay cash thanks
Yikes. not quite like get rid of the controller and hard wire.. Gonna have to watch this a few times
Can somebody link part two?
hi all .i got a "karme" can i modify thats ?
What if my controller doesn’t have that rod it just has a relay box
Any test?
Is that for brushes controller?
Yes brushless totally different as runs 3 fase. Normally just up voltage to get brushless to go a bit faster. Otherwise a higher amperage controller.
Hi can you help me..i have an escooter with 48v 18ah, dual motor with 800w each...i dont know yet how many wats the motor controler yet...my problem is it run at max 25kmh..how can i add more speed..should i over volt the motor like maybe 1000w or plus, or should i upgrade my motor controller to higher..can you help me
It's just restricted to 25 as that's what most European countries govern it 48v should easily do 28 to 30mph usually settings are in the controller settings or unplug a grey wire in the side to take the restrictor off
Any info on mods for Vespa Elettrica 2020 30MPH ?
No sorry
Could you please show me how to make my moovway i pro go faster on easy mod way
Can I use a lipo instead of lithium ion battery to gain more speed?
I mean if someone did this it's a wise choice to automatically set your battery up to be "dead" at like 10% so you don't kill it off completely but i think it's a cool concept to try it
So you're not gonna test it? I'm not gonna do that to my $700 scooter if you're not even going to test it
There is some videos where people test the scooter
@@kerosene1010 can you sent me the link?
@@raul5457 no
I am willing to test on my $50 scooter speed controller
@@eliaswangblad1798He didn’t even ask you, lmao. Jumping into other people’s conversations. 😂
Can I pay to get this done? I have an ST6
I think you'll find you have your positive and negative mixed up :O)
This won't add any more mph to a restricted scooter just adds more torqe
Sweet :)
I want to see this proform
Mad Mods. Great video. What people are commonly doing is disconnecting the white wire. They said that's the speed limiter.
What I have always do is use a more powerful battery and controller with higher wattage
Hi can you upgrade the motor
Can you show us you riding the scooter
this scooter got more mods then sold on.
My 24v dc 10w scooter has 4 moss switches..
Pro-tip: do not use your 500-750degree solder gun as a pointer in regards to your PCB.
As a matter of safety, just don't do anything this video recommends. He is using way to much wire for the shunt and wielding the solder gun with zero regard to his electronics. There are more efficient solder guns that run on electric rather than butane. Geez Louise
My revo pride mobility scooter has a different control box can you please send me how to change the speed on this scooter please thanks phillip
3 Capacitors... aren't they dangerous ?
Not if dis charged. Still dont put your finger on them just in case.
@@MADMODS yep, be sure to put reminder in video, or newbies might get a surprise. ⚡
I soldered it very nicely! No you didn’t!
I’m in London Kent can anyone do this or anything to mine please I can pick up drop off and pay cash thanks
What about the hiboy max /inceptor hoverboard/M5 / megamotion many others same ride just diff names.. but mine goes advertised 19 miles so but had it hit 21 couple times.. so lie 33 km an hour but with the need for speed all my life and big into racing....till I became parent but these bring me back to feeling like a kid again Nd GONA help my son and I bomd even MORE once he gets old enough for thse..but..ya if someone can tell me how to do it on mine without me destroying it completely? If I cam get another 5 or ql10 km an hour the be alo the difference...amd all it's really lacking.. aside from rear sh9cks but uve reinforced it around a bit it actually helped ha...but this is more of a street sports car tyoe ...tlmy jeep version is next.. but under 1500 or 1000 even but NEED ls to be able to go offroad as much as on and gokd bounce..and speed.. I know our company here in CANADA. M apolo.. but.. that song be for a while m so for now I gotta make sure I cut the PROPER WIRE or I'll loose out on 600 bucks..😱and this is my therapy and sanity right NOW ESPECIALLY...bit ues itll work the same for anyone who got ANY of these scooters.. the ones with LED side blue lights and it stands out for sure than most others under the 600 $ range...next is best under 1000 then maybe best under 2000 later down road.mlike my vehicles used to beam gotta have an infinity and then a JEEP.. u need them both to be able to drive on ANYTNING... but I'm gona unscrew the bottom as they gor it reinforced with like 20 screws amd SUOER thick plastic and I even threw duck down down under it to ti water PROOF it eve more haha..but.onh if I can get this extra 5 miles or so faster yes pkz mm THATD MAKE value of this more for me ..and 30.km/ he just ISNT fast enough for me.. in a driver and x racer and am addicted to these things and new way of driving/riding and for now has to be as FAST as THIS thing can be.. few more weeks weather will be warming..gotra be ready folks 👍🤞✌🙌be safe yall..I may go ahead and try or wait for a reply ha..needless if it days days I dont wana fuck it io and it mot be able to even turn on anymore 😱
Man, I am a patient guy but I could only get halfway through reading this. Check your spelling if you want to be taken seriously
@@klg1001 after 9 months wtf RU talk about and leme guess you're RACIST as well as DISCRIMINATING puny INTELLECT imbicel MINORITY jealous bully .. phh good luck with that whole rest of world leaves you and PPL like you behind #awareness #teamworkmakesthedreamwork #REDEMPTION #faith #family #forgiveness #endcruetly #xtremesportstherapy #REDEMPTION #EMPATHY #SPECIALgifts NOT SPECIAL NEEDS #humanity #respect #LOYALTY #love #FAMILYis4EVER #stopracism #stopgenocide
Any way to speed up that screw driver ?
Yeah by putting 2x speed on the video
Anyone do this with a tga supersport please?
i did what you showed here but after installing it back into my ebike almost right away icould smell somethjng burning and as my attention was distracted i hit the throttle just a little and went flying into an intersection and hit a dicky-d trike. the bike suddenly took off again and tried to evade an unrelated police chase. we ended up in a ditch.....i tried to tell the bike to put the gun down but didnt get to finish when police open fired. Killing my bike in a hai, of bullets ALL BECAUSE OF YOUR GD MODS. I hope you sleep well at night because i have to adjust to peddling on my own power alone. You'll be hearing from my lawyer Soon😉😆😃☺🙂😁☻🤠🙊🙉🙈🗣🤙👏👌👍
How could I increase my 350w motor? (Scooter)
in what way?
How can i add more speed in 350w controller?
@@delacalazadapaulrafael9077 brushless or brushed motor/controller?
@@FINDITFIXITRESTOREITBUILDIT brushless
@@delacalazadapaulrafael9077 unfortunately it's not easy with brushless motors to get more speed out of them.
if the speed controller can be reprogrammed that can help or possibly going up in voltage a but unlike brushed dc motors where increased voltage give big results in speed brushless go on Watts and you need more watts to go faster
I’ll pay uto do this to my scooter
how do we remove it from the scooter
Depends on the scooter. It should be housed near your battery and controller
This controller will overheat in no time.
At the start of the video you say that this mod will allow you to run a higher voltage? You are modifying the ways that the motor draws amps in the video. This is nothing to do with volts. If those capacitors are over 36v ie 63v then the stock controller would happily run 36v without messing about with current shunts.
Very true
@@MADMODS I wasn't trying to be negative I just re read the way I wrote my comment and it sounded like I was being a smart a s s
I really enjoyed the video! There isn't much content like this on here and your method was clear :)
Can anyone help me?
Tao tao?
I"m sorry man, but this is terrible soldering... Get your self a cheap 80w soldering iron + some nice leaded 63/37 solder and it will do wonders right off the bet
What a Great way to get the smoke out of that controller !!! Those controllers are so inexpensive that you do not need to construct fire starting circuits. I have been in electronics over 40 years ( just retired ) please do not modify circuits with out proper knowledge of the subject . What you are doing is excessively stressing the high power components (thus shortening their ljves )
shhhhhhh
Try adding background music to ur vids
Gr8 content tho
This DOSENT work 😂 meany people have done this with NO difference
For realz?
Yep.
That's not going to work for brushless controllers oh, that's just for regular DC brushed controllers.
No brushless use 3phase and the controller is not modifiable you just need a bigger amperage speed controller or be able to over clock the motor timing to get it to go faster or accelerate faster depinning on how you tune the motor timing. Standard dc motor put in more voltage gets faster but hotter.
Brushless is a bit more tricky due to 3 phase but can still take more voltage but doesn't always go faster. A better speed controller and motor if you want more speed with brushless or a speed controller that handles more amps mite help.
Hope all that made sense any other questions just ask.👍
I could solder better than you before I knew how to solder this is a disgusting way to join a wire and not even make it look clean
PLS get a proper soldering iron.
I've got 2 😃
NONSENSE!....THIS VIDEO IS HOW TO DESTROY YOUR SCOOTER...
very good way of increasing the the speed and torque availability from a poor quality speed controller and an excellent way to burn down your home when charging your chosen vehicle for this cheapskate shunt modification...you will also receive a bonus kick to the testicles when you discover that you could have avoided this tragedy had you spent 50 quid on an uprated speed controller....fantastic.
The circuitry in the speed controller has nothing to do with the charger or charging circuitry of the scooter at all.
So no it wont go up in flames.
Is this will work on monorover r4 40.5 volts
yes
Iv been scouring the Internet and RUclips trying to find any vids on speed hacks for the megawheels s5 I was wondering do u know of any hack or upgrade for this model escooter be greatly appreciated
same. I have the s10
@@mrburns366 Samsung ???