Been eyeing the whipple for a couple years now. Wish i didn't live so far from you guys...my SS would definitely be coming to you this year for the upgrade.
I got a Whipple 3.0 on my 2022 LT1. Street tune from best shop in town. We kept it around 600 RWH. All stock otherwise. 6 M trans. But you can not deny how fast the autos shift.
Thank you for the response. Yes. I figured stock would be somewhere close to 10sec. If this car had drag radials on it I definitely think 6.5-6.7 is doable.
Heck of a build. Saving my money and hoping by the end of the year I can come see y’all. Although y’all are pricey I reckon pay one and have it done right the first time!!! :)
Do you guys have someone that can possibly answer some questions about camaro ss builds? I have a 2015 ss with magnuson tvs2650 and would like to learn more about it. Thanks
I’ve been looking at picking up a LT1 SS Camaro after driving a friend of mines. I love how torquey those motors are. I can’t imagine with a whipple on there how much more it would feel. Can you give me a guesstimate as to how much it would cost to replicate this build?
I had a 6th SS already. Getting a damn ZL1 regardless lol. Love it but i know we all know that heat management is a huge difference between SS and ZL1. Dare to say that a zl1 pulls up with the same mods…it’s over lol.
Have a 2650 switching to 3.0 Could not fit 2650 with stock hood Cost a ton to fix this. Out of the box lost all of my belts on freeway very tenseoment.ay
SO VICIOUS! These cars are insane bang for buck and I'm sure this package blows the doors off. That 60-130 time puts it on par with the Plaid. If not faster.
Not even close. Plaid S is in the 4's. And bang for your buck is terrible. They had to pull the engine, change the cam, valvetrain and reassemble along with the cost of the blower just to run mid to high 6's. You have any idea how much that costs? You can buy a completely stock 5.0 Coyote, put a Whipple on it and run low 6's 60-130 for less then half the cost.
So there's this 2017 camaro 2SS I want to get right, but the thing is that I want to put a supercharger in it. And it's a 6.2L V8 and I was wondering about putting a magnuson if I'm saying that right supercharger in it. Specifically the Magnuson 01-26-62-176-BL - TVS2650R Magnum Di Supercharger System. And I just wanted to know if it could fit into the camaro I want to get.
I liked the 3.0 whipple I had on my 22 SS more than a zl1. The zl1 compression is lower so it doesn’t sound as good either. Whipple 3.0 with base tuning is faster.
I wouldn’t push the boost more than 6 psi on a stock lt1 engine unless you are changing the internals to forged high strength materials and the piston rings. Unlike LT4, LT1 runs on high compression ratio so high boost makes it a ticking time bomb. Timing also needs to be backed up .
Looks u guys do a nice job, I have a 90 mustang GT convertible, would like to know about to put more power on it, about from original HP to maybe 400 HP? Let me know about that please, thank you!
These tires (assuming they're plain Nitto NT555 G2s) are junk, especially at this power level. The customer should get the 555 RIIs or at least quality non-drag radials.
This is literally the perfect street car
Damn nice build. That Whipple in red sets off the whole engine compartment. Runs bad ass also.
Congrats on the build.
YaY more camaro ss stuff!
Yes sir!! We will try and keep more coming.
Been eyeing the whipple for a couple years now. Wish i didn't live so far from you guys...my SS would definitely be coming to you this year for the upgrade.
Ship it out there
Wow so sick...that Whipple is a beast!
Thank you! It is a strong running vehicle for sure!
Awesome cinematography and editing style. Camaro sound now matched the killer style
Love it! ❤ can’t wait to go for a ride in it! This is my dream car!
Yes’ more ss builds!!! Love it!
Love the Chevrolet stuff. Keep it up.
My best time is 7.23 60-130. Stock internals, Headers, meth injection.
This is faster than mine while spinning!🔥🔥
I got a Whipple 3.0 on my 2022 LT1. Street tune from best shop in town. We kept it around 600 RWH. All stock otherwise. 6 M trans. But you can not deny how fast the autos shift.
No lift shift is way more fun.
Hey are you on the stock clutch? If so how is it holding up? Thanks.
Stock cam, injectors and hpfp?
That's kind of what I want in my 2019 silverado. Can we do an emailed hp tuners tune?
What i have to say is that ss is sick AF lol love how it sounds
Really nice build Steven! Car looks, sounds, and performs really well.
Thank you!!
Looks sweet, sounds amazing.
Awesome! Hopefully we can get my 1LE in for something similar!
Camaro does have a nice sound with the wipple.
Have you guys builds any twin turbo LT1 yet?
How much is this kit and service would love to know how much I need to save up for you guys 🤙
Got a black Camaro 2SS 2023
I did a 10.70 60-130 in my stock manual 1LE so it should be around that stock. If that car was hooking it may do a 6.60 which is pretty dang fast
Thank you for the response. Yes. I figured stock would be somewhere close to 10sec. If this car had drag radials on it I definitely think 6.5-6.7 is doable.
This is the literal definition of, cart before horse.
Heck of a build. Saving my money and hoping by the end of the year I can come see y’all. Although y’all are pricey I reckon pay one and have it done right the first time!!! :)
How much is a build like this, assuming labor in the cost? 5:46
I’m assuming 15,000-20,000$ for this setup all in all
I say more because that supercharger kit is almost $10000 alone.
Probably more toward the higher end. He did pistons, cams, etc etc. Dude probably spent $25-30k out the door.
Real nice i keep watching it and the more i see it the more i want doingit
Do you guys have someone that can possibly answer some questions about camaro ss builds? I have a 2015 ss with magnuson tvs2650 and would like to learn more about it. Thanks
Love your videos brotha🤙
I’ve been looking at picking up a LT1 SS Camaro after driving a friend of mines. I love how torquey those motors are. I can’t imagine with a whipple on there how much more it would feel. Can you give me a guesstimate as to how much it would cost to replicate this build?
How many miles can you put on engine like this?
looks like the perfect set up. What is the cost of this package?
I had a 6th SS already. Getting a damn ZL1 regardless lol. Love it but i know we all know that heat management is a huge difference between SS and ZL1. Dare to say that a zl1 pulls up with the same mods…it’s over lol.
Built my ss ..fan runs all the time to keep it cool…zl1 is the choice if you can.
@@perrylynch322 an SS 1LE would probably have an easier time staying cool
Do you change or recommend a 1 piece drive shaft , in a manual...
Heck yeah
How mich power would it make if you left the stock cam in?
Not enough. It's a Chev remember? Lol
Not enough. It's a Chev...lol
Why? A ctsv makes 653 crank hp with stock 1.7 SC and stick cam and lt4 cam is s.aller than an lt1 cam
Super cool stuff
Will the 3.0L fit under a stock hood?
Maggie 2650 or whipple? Which makes more power in this setup, what about IAT’s?
Have a 2650 switching to 3.0
Could not fit 2650 with stock hood
Cost a ton to fix this. Out of the box lost all of my belts on freeway very tenseoment.ay
That Sound😮 what kind of exhaust ist that??
More Camaro SS please.
Is there a way to have minimal shake so it’s comfier I want to make 660hp on stock internals. 2018 Camaro ss hot wheels 12,755 miles
Amazing!
Does make any difference on 23 ss 1le??
SO VICIOUS! These cars are insane bang for buck and I'm sure this package blows the doors off. That 60-130 time puts it on par with the Plaid. If not faster.
Not even close. Plaid S is in the 4's. And bang for your buck is terrible. They had to pull the engine, change the cam, valvetrain and reassemble along with the cost of the blower just to run mid to high 6's. You have any idea how much that costs? You can buy a completely stock 5.0 Coyote, put a Whipple on it and run low 6's 60-130 for less then half the cost.
@@freak_5.042 Yes you are right on the Plaid times unfortunately I was way off. Can't comment on Coyote 5.0, never built either myself
How much would something like this be ????
So there's this 2017 camaro 2SS I want to get right, but the thing is that I want to put a supercharger in it. And it's a 6.2L V8 and I was wondering about putting a magnuson if I'm saying that right supercharger in it. Specifically the Magnuson 01-26-62-176-BL - TVS2650R Magnum Di Supercharger System. And I just wanted to know if it could fit into the camaro I want to get.
I also forgot to mention there was also a whipple supercharger and mt question is which would fit the camaro
So you don’t have to build the motor to go above 655?
How would the new whipple do on a lt4 cts-v/zl1
Is this better than the Magnuson supercharger? Also does it fit under the hood of a grand sport corvette?
Yes this is a 3.0 liter blower and not a 2.3 liter blower
that is nice i have a 2010 camaro ss with 35k miles an would love to do the same what am i looking at
So sick!!!
Thanks
Love the videos. Want you guys to tune my turbo Camaro
Thank you! Feel free to hit us up anytime.
Nasty!
Thank you!
What cam is this?
God I need this for my 5th gen
Where can I find that hood?
That runs beautiful…always clean a big horsepower when cars leave LMR.. 👍🏻🇺🇸🇺🇸🇺🇸🇺🇸…. 😎
BaDAzz 🇺🇸🏁
Is it necessary to cut the hood for the installation, or is the see threw hood just for cosmetics..??
Nice job on the SS! Have you installed a Whipple 3.0 on a Camaro LT1 yet?
This is an LT1
Yes, that is what this build is! 👍
@@LateModelRacecraft I meant an LT1 vs an SS.
@@superado2kLT1 and SS have the same engine…
@@KendallFreeman2020 yeah, I understand that 👍
How much is this package and dont say shoot me an email
I liked the 3.0 whipple I had on my 22 SS more than a zl1. The zl1 compression is lower so it doesn’t sound as good either. Whipple 3.0 with base tuning is faster.
curious, why stock intake still ?
The aftermarket hood vents are right over the air box. We didn't want water spilling in on the air filter
I'd love to see a NA build with the same'ish idea. 500-600hp range and compare 5th gen with the same idea with a 6th gen. At the least talk about it.
I wouldn’t push the boost more than 6 psi on a stock lt1 engine unless you are changing the internals to forged high strength materials and the piston rings. Unlike LT4, LT1 runs on high compression ratio so high boost makes it a ticking time bomb. Timing also needs to be backed up .
Not very accurate as a Coyote runs 12.1 compression and you can run 11psi safety on pump 93 and run 5.9-6.1 60-130 all day. LT1 is just a weak engine.
Good job ! Put some $ back for a transmission, 4L80E or T56 magnum.
Sounds awesome
Nice I need one of them asap !! 😂
🔥
You gotta go competitive mode.
Looks u guys do a nice job, I have a 90 mustang GT convertible, would like to know about to put more power on it, about from original HP to maybe 400 HP? Let me know about that please, thank you!
Take it somewhere else, LMR is Chevrolet bud.
@@SoloStix are you a LMR guy in charge about the videos? If not let a specific or special person to say something," bud".
@@Carado5150 I agree I had one in a 88gt I meant LMR
@@manuelmundo5506 no, I'm a Ford guy and lmr is Chevrolet I know several people with lmr vets.
800 hp? Not on the lt1 pistons haha.
I think pro charger with lt4 high side fueling is best. I made 690whp 60 percent ethanol. It’s on my page
🔥🔥
The Red is the shit but I would do it on a convertible
About what my lt416 made na
Bad ass!
These tires (assuming they're plain Nitto NT555 G2s) are junk, especially at this power level. The customer should get the 555 RIIs or at least quality non-drag radials.
Don't let ya daddy drive it
665 RWHP is not crazy high???? Okay!
Because it’s not turned up that yet
I know pray LT1 cars making 650 whp NA. It’s making shit power for a 3L whipple.
Gonna fry the rings and pistons within a couple months
Nonsense. This is mild. Don't run a lean tune and it is just fine. 7.5lbs is safe.
Has drop in forged pistons anyway
what is the total cost for the upgrade
One million dollars
Austin powers reference
Watched until 8:45 and saw it was automatic hahah